• 한국정보시스템학회지:정보시스템연구
• /
• 제30권1호
• /
• pp.151-177
• /
• 2021

Purpose This paper aims to improve management performance by effectively responding to production needs and reducing inventory through synchronizing production planning and procurement in the aviation industry. In this study, the differences in production planning and execution were first analyzed in terms of demand, supply, inventory, and process using the big data collected from a domestic aircraft manufacturers. This paper analyzed the problems in procurement and inventory management using legacy big data from ERP system in the company. Based on the analysis, we performed a simulation to derive an efficient procurement and inventory management plan. Through analysis and simulation of operational data, we were able to discover procurement and inventory policies to effectively respond to production needs. Design/methodology/approach This is an empirical study to analyze the cause of decrease in inventory turnover and increase in inventory cost due to dis-synchronize between production requirements and procurement. The actual operation data, a total of 21,306,611 transaction data which are 18 months data from January 2019 to June 2020, were extracted from the ERP system. All them are such as basic information on materials, material consumption and movement history, inventory/receipt/shipment status, and production orders. To perform data analysis, it went through three steps. At first, we identified the current states and problems of production process to grasp the situation of what happened, and secondly, analyzed the data to identify expected problems through cross-link analysis between transactions, and finally, defined what to do. Many analysis techniques such as correlation analysis, moving average analysis, and linear regression analysis were applied to predict the status of inventory. A simulation was performed to analyze the appropriate inventory level according to the control of fluctuations in the production planing. In the simulation, we tested four alternatives how to coordinate the synchronization between the procurement plan and the production plan. All the alternatives give us more plausible results than actual operation in the past. Findings Based on the big data extracted from the ERP system, the relationship between the level of delivery and the distribution of fluctuations was analyzed in terms of demand, supply, inventory, and process. As a result of analyzing the inventory turnover rate, the root cause of the inventory increase were identified. In addition, based on the data on delivery and receipt performance, it was possible to accurately analyze how much gap occurs between supply and demand, and to figure out how much this affects the inventory level. Moreover, we were able to obtain the more predictable and insightful results through simulation that organizational performance such as inventory cost and lead time can be improved by synchronizing the production planning and purchase procurement with supply and demand information. The results of big data analysis and simulation gave us more insights in production planning, procurement, and inventory management for smart manufacturing and performance improvement.

• 한국식품위생안전성학회지
• /
• 제29권2호
• /
• pp.79-84
• /
• 2014

본 연구는 비가열 섭취 냉동 당근주스의 HACCP (Hazard Analysis Critical Control Point)시스템 구축을 위하여 생물학적 위해요소분석을 위한 목적으로 2013년 6월 21일~2014년 3월 30일까지 약 270일간 제주도 제주시 구좌읍 소재에 있는 구좌농협에서 수행하였다. 일반적인 과채주스 제조업체의 제조공정을 참고로 하여 공정도를 작성하였으며, 원료 농산물(당근), 용수와 포장재료 입고, 보관, 세척, 분쇄, 착즙, 냉각, 내포장, 금속검출, 외포장, 보관 및 출하공정에 대하여 Fig. 1과 같이 작성하였다. 원료 당근의 세척 전, 세척 후의 Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, 장출혈성대장균수를 측정한 결과 Bacillus cereus 는 세척 전 $4.70{\times}10^4CFU/g$이었으나, 세척 후 $1.02{\times}10^2CFU/g$ 검출되었으며, 나머지 병원성균은 검출되지 않았다. 자외선살균공정에서 당근주스의 유속를 변화시키면서 미생물의 변화를 시험한 결과 유속 4 L/min을 한계기준으로 결정하였다. 작업장별 공중낙하균(일반세균수, 대장균, 진균수) 시험결과 세척실의 미생물수는 20 CFU/Plate가 검출되었다. 작업자 손 세척 전후 시험결과 세척 전 일반세균수가 $6{\times}10^4CFU/cm^2$로 높게 나타났으나 손 세척 후에는 검출되지 않아 손 세척 및 소독에 대한 중요성을 교육하고 훈련해야 할 것이다. 제조설비 및 기구의 표면오염도를 검사한 결과 모든 시료에서 대장균군은 검출되지 않았고, 일반세균은 포장기 노즐에서 가장 많은 $8.5{\times}10^4CFU/cm^2$ 검출되었다. 위해분석 결과 병원성미생물을 예방, 감소 또는 제거할 수 있는 자외선살균 공정이 CCP-B (Biological)로 관리되어야 하고, 한계기준은 유속 4 L/min로 결정하였다. 따라서 Kwon의 유산균을 함유한 녹즙의 HACCP에 관한 연구에서와 같이 자외선살균 공정의 한계기준 및 이탈시 조치방법, 검증방법, 교육 훈련과 기록관리 등 철저한 HACCP 관리계획이 필요할 것으로 생각된다.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• 대한의용생체공학회:의공학회지
• /
• 제37권1호
• /
• pp.46-52
• /
• 2016

나노 입자는 암의 조기 진단과 효과적인 치유를 위한 약물 전달체 또는 영상 조영제로 연구개발 되어왔다. 이러한 나노 입자는 주로 EPR effect로 인해 효과적으로 암 세포를 표적하는 것이 가능하다고 보고되었고, 주로 구형의 나노 입자들이 이러한 실험에 적용되었다. 그러나 최근 EPR effect가 사람의 암 치료에 있어서는 큰 효과를 나타내지 않는다는 한계점이 여러 연구를 통해 제시되고 있다. 따라서 본 연구에서는 이러한 구형 나노 입자의 한계점을 극복하기 위한 새로운 형태의 디스크 나노 입자를 제안하고, 디스크 나노 입자의 생산 과정과 입자의 질을 향상시키기 위한 입자 생산방법에 관한 연구 내용을 보고하였다. 본 연구를 통해 생산된 디스크 나노 입자는 인간 유방암인 MCF7 세포에 적용하여 항암제 전달체로써의 가능성을 평가하였다.

• 문화기술의 융합
• /
• 제4권2호
• /
• pp.211-216
• /
• 2018

흡착과 막을 융합시킨 분리기술은 수처리와 같은 환경 분야에서 많은 응용이 기대된다. 이 융합기술에 막분리 공정에서 문제가 되는 막 fouling을 억제시키기 위해 막표면에 카본휘스커를 성장시킨 기능성 카본막을 개발하였다. 본 연구에서는 기능성 카본막의 제조 Mechanism을 밝히기 위해, 각각의 혼합비율인 폴리머라텍스로 전처리를 하고 CVD(Chemical Vapor Deposing)법에 따라 막을 제조하였다. 이 막을 주사전자현미경(Scanning Electron Microscope(SEM)), CHN분석기(Elemental Analyzer), X-선회절법(X-Ray Diffraction(XRD))으로 분석하였다. 그 결과 3번막(PVdC(PolyVinyl di-Chloride):PVC(Polyvinly Chloride)=4.5:55)의 경우가 카본휘스커의 직경과 밀도가 높았다. 이것은 폴리머라텍스의 수소함유량에 따라 카본휘스커의 직경과 밀도를 조절하는 것이 가능할 것으로 보인다.

• 한국컴퓨터정보학회지
• /
• 제14권2호
• /
• pp.159-164
• /
• 2006

제조실행시스템(MES: Manufacturing Execution System)은 현장(shop floor)에서 작업을 수행하기 위한 제반 활동 (스케줄링, 작업 프로세스, 품질관리, 등)을 지원하기 위한 관리 시스템이다. 특히, MES는 생산계획과 실행의 차이를 줄이기 위한 시스템으로 현장상태의 실시간 정보제공을 통하여 관리자와 작업자의 의사결정을 지원하는 기능을 수행한다. 실시간 정보처리를 위한 MES는 최근 많은 관심을 가지고 있는 RFID의 Data를 모델링하고, 제조부터 판매까지 각 프로세스 내의 제품을 모니터링 하는 기능이 필요하다. 그러나, RFID가 부착된 제품이 프로세스 과정에 있어서, tag, reader의 오작동, 고의적 파손, 분실, 주변 영향으로 인해, 리더기가 tag를 읽지 못하는 경우, 제품의 위치를 모니터링 할 수 없다. 이러한 경우, 불확실한 정보를 가지고 제품의 경로를 추적하여야만 한다. 본 논문은 신속하게 제품을 찾기 위해, RFID와 Bayesian Network을 이용한 MES를 제안하고 성능을 평가하였다.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.23-30
• /
• 2020

Laser Assisted Thermo-Compression Bonding (LATCB) has been proposed to improve the "chip tilt due to the difference in solder bump height" that occurs during the conventional semiconductor chip bonding process. The bonding module of the LATCB system has used a piezoelectric actuator to control the inclination of the compression jig on a micro scale, and the piezoelectric actuator has been directly coupled to the compression jig to minimize the assembly tolerance of the compression jig. However, this structure generates a lateral force in the piezoelectric actuator when the compression jig is tilted, and the stacked piezoelectric element vulnerable to the lateral force has a risk of failure. In this paper, the optimal design of the flexure hinge was performed to minimize the lateral force generated in the piezoelectric actuator when the compression jig is tilted by using the displacement difference of the piezoelectric actuator in the bonding module for LATCB. The design variables of the flexure hinge were defined as the hinge height, the minimum diameter, and the notch radius. And the effect of the change of each variable on the stress generated in the flexible hinge and the lateral force acting on the piezoelectric actuator was analyzed. Also, optimization was carried out using commercial structural analysis software. As a result, when the displacement difference between the piezoelectric actuators is the maximum (90um), the maximum stress generated in the flexible hinge is 11.5% of the elastic limit of the hinge material, and the lateral force acting on the piezoelectric actuator is less than 1N.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.129-135
• /
• 2021

Recently, additive manufacturing (AM) technology such as powder bed fusion (PBF) and directed energy deposition (DED) are actively attempted as consumers' needs for parts with complex shapes and expensive materials. In the present work, the effect of processing parameters on the mechanical properties of 316L stainless steel coupons fabricated by PBF and DED AM technology was investigated. Three major mechanical tests, including tension, impact, and fatigue, were performed on coupons extracted from the standard components at angles of 0, 45, 90 degrees for the build layers, and compared with those of investment casting and commercial wrought products. Austenitic 316L stainless steel additively manufactured have been well known to be generally stronger but highly vulnerable to impact and lack in elongation compared to casting and wrought materials. The process-induced pore density has been proved the most critical factor in determining the mechanical properties of AM-built metal parts. Therefore, it was strongly recommended to reduce those lack of fusion defects as much as possible by carefully control the energy density of the laser. For example, under the high energy density conditions, PBF-built parts showed 46% higher tensile strength but more than 75% lower impact strength than the wrought products. However, by optimizing the energy density of the laser of the metal AM system, it has been confirmed that it is possible to manufacture metal parts that can satisfy both strength and ductility, and thus it is expected to be actively applied in the field of electric power section soon.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.1-7
• /
• 2005

저항 값을 맞추기 위한 트리밍 공정이 낮은 저항온도계수와 높은 정밀성을 요구하는 박막저항기 특성에 미치는 영향에 대한 연구가 수행되었다. 스퍼터링 방법으로 제조된 박막 저항기의 트리밍 속도에 따른 저항기의 특성 변화와 온도계수의 변화가 관찰되었다. 트리밍 속도의 증가에 따라서 박막 저항기 특성은 저하되었으며, 열처리로 저항 값의 평균 편차 $0.26\%$ 및 저항온도계수 52.77(ppm/K)의 개선효과가 있었다. 1k$\Omega$와 10k$\Omega$저항기가 100k$\Omega$ 박막저항기 보다는 특성이 양호하였으며, 트리밍 속도의 치적 조건으로는 20mm/sec와 특성 개선을 할 수 있는 최적 열처리 온도는 593K였으며 최적 조건에서 제작된 저항기의 저항 값의 평균 편차는 $0.31\%$ 및 저항온도계수 10(ppm/K)미만이었다.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.280-287
• /
• 2009

High-tech microelectronics industry is known as one of the most chemical-intensive industries. In Korea, Microelectronics industry occupied 38% of export and 16% of working employees work in microelectronics industry. But, chemical information and health hazards of high-tech microelectronics manufacturing are poorly understood because of rapid development and its penchant for secrecy. We need to investigate on chemical use and exposure control. We Site-visits to 6 high-tech microelectronics manufacturing company which have cleanroom work using over 1,000kg organic solvents (5 semi-conductor chips and its related parts company, 1 liquid crystal display (LCD)). We reviewed their data on chemical use and ventilation system, and measured TVOCs (Total Volatile Organic Compounds) and carbon dioxide concentration. All cleanroom air passed through hepa filters to acheive low particle levels and only 1 cleanroom uses carbon filters to minimize the organic solvents exposures In TVOC screening test, Cleanroom for semi-conductor chips and its related parts company with laminar down flow system (e.g. class 1~100) showed nondetectable level of TVOCs concentration, but Cleanroom for liquid crystal display (LCD) with conventional flow system (e.g. class 1,000~10,000) showed 327 ppm as TVOCs. Acetone concentration in cleanroom for Jig cleaning, LC Injection, Sealing processes were 18.488ppm (n=14), 49.762 ppm (n=15), 8.656 ppm (n=14) as arithmetric mean. Acetone concentration in cleanroom for LCD inspection process was 40ppm (n=55) as geometric mean, where the range was 7.8~128.7ppm and weakly correlated with ventilation rate efficiency(r=0.44, p<0.05). To control organic solvents in cleanrooms, chemical and carbon filters should be installed with hepa filters. Even though their volatile organic compounds concentration was not exceed to occupational exposure limits, considering of entrance limited cleanroom environment, long-term period exposure effects and adverse health effects of cleanroom worker need further reseach.