• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.67-72
• /
• 2013

Temperature is a critical parameter in yield improvement for wafer manufacturing. In chemical vapor deposition (CVD) equipment, crack defect in ceramic heater leads to yield reduction, however, there is no suitable ceramic heater fault detection system for conventional CVD equipment. This paper proposes a short-time zero-crossing rate based fault detection method for the ceramic heater in CVD equipment. The proposed method measures the output signal ($V_{pp}$) of RF filter and extracts the zero-crossing rate (ZCR) as feature vector. The extracted feature vectors have a discriminant power and Gaussian mixture model (GMM) based fault detection method can detect fault in ceramic heater. Experimental results, carried out by measured signals provided by a CVD equipment manufacturer, indicate that the proposed method detects effectively faults in various process conditions.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.424-429
• /
• 1993

Numeric characters are printed at the end part of nuclear fuel rod containing nuclear pellets. Fuel rods are discriminated and managed systematically by these characters in the process of producing fuel assembly. The characters are also used to examine manufacturing process of fuel rods in the survey of burnup efficiency as well as in inspection of irradiated fuel rod. Therefore automatic character recognition is one of the most important technologies in automatic manufacture of fuel assembly. In this study, character recognition system is developed. In the developed system, mesh feature extracted from each character written in the fuel rod has been compared with reference feature value stored in database, and the character is thus identified. In the result of experiment, 95.83 percent recognition rate is achievable.

• Journal of Information Technology Services
• /
• v.1 no.1
• /
• pp.67-80
• /
• 2002

This study aims to explore the ways of reinforcing the competitive edge and substance of company through e-business in furniture industry by presenting the e-business model of furniture industry which faces the opportunity of challenge in the course of industrial restructuring. e-business model can take various types depending on the environment, feature and competitive edge that each company faces. For example, it is general in the fields of manufacturing company to study the model by dividing into Sell Side for sales to the customers, and Buy Side for purchase of raw materials, Integrating both sides. In furniture industry, Sell Side has the feature of giving a priority in the quality and price rather than brand image in the purchase type of consumer. Especially, it shall not be overlooked that majority of furniture is delivered to the consumer indirectly through the construction company. As such, e-business should be promoted in a way to expand the point of contact for consumers, rather than to construct its own point of contact for consumers. The percentage of importation of raw lumber is high and the standardization was insufficient in Buy Side.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.338-345
• /
• 2013

Induction motors play an increasing importance in industrial manufacturing. Therefore, the state monitoring systems also have been considering as the key in dealing with their negative effect by absorbing faulty symptoms in motors. There are numerous proposed systems in literature, in which, several kinds of signals are utilized as the input. To solve the multiple faults problem of induction motors, like the proposed system, the vibration signals is good candidate. In this study, a new signal processing scheme was utilized, which transforms the time domain vibration signal into the spatial domain as an image. Then the spatial features of converted image then have been extracted by applying the dominant neighbourhood structure (DNS) algorithm. In addition, these feature vectors were evaluated to obtain the fruitful dimensions, which support to discriminate between states of motors. Because of reliability, the conventional one-against-all (OAA) multi-class support vector machines (MCSVM) have been utilized in the proposed system as classifier module. Even though examined in severity levels of signal-to-noise ratio (SNR), up to 15dB, the proposed system still reliable in term of two criteria: true positive (TF) and false positive (FP). Furthermore, it also offers better performance than five state-of-the-art systems.

• Journal of Fashion Business
• /
• v.27 no.6
• /
• pp.66-84
• /
• 2023

Handbags are a part of fashion and while their significance and value are increasing, research on this topic is lacking. This study defines handbags and categorizes the materials used for making handbags, sewing methods, expression techniques, and terminologies related to accessories. A total of 1,743 handbags that were released from the Spring 2020 to Fall 2023, Ready-to-Wear collections by 8 selected brands (Hermes, Dior, Fendi, Chanel, Louis Vuitton, Prada, Gucci, and Alexander McQueen), were analyzed. Out of these, 732 unique designs, excluding those with only color variations, were studied. The most common sewing methods were 'Cut, sewing, and edge painting', 'Cylinder arm sewing', 'Cut, edge painting, and sewing', and 'Inverted seam', in that order. Slim strap designs primarily used the 'Cut, sewing, and edge painting' method, whereas the body, especially with narrow and hard leather, was best suited for the 'Cylinder arm sewing machine'. For expression techniques, the most frequently used methods were 'Quilting', 'Metal Eyelet', 'Embossing', 'Printing', 'Punching', and 'Weaving', respectively. The characteristics of each brand's production methods, expression techniques, and accessories were as follows: First, the exposure of logos and monograms is prominent. Unlike clothing, handbags often prominently feature the brand's logo or monogram. Second, signature quilting is a prominent feature. Quilting effectively conveys the brand's signature style, providing cushioning, volume, and pattern effects. Third, sustainable development is a growing trend. Brands are increasingly applying eco-friendly and socially responsible designs.

• Journal of the Korean Regional Science Association
• /
• v.6 no.2
• /
• pp.123-147
• /
• 1990

This paper examines the changing geography of producer service industries in the 1980s. The foci of this study are to analyze the regional distribution of each producer services, and to reveal the spatial linkage of producer services. Further this paper asserts the potential role of producer services for reducing the potential endogenous development in the periphery. During the 1981-86 period, producer service industries grew more rapidly than other service sectors and manufacturing sector. The main reason of the raid growth of producer services is attributable to an increase in demand for intermediate services from manufacturing firms. In order to compete an increasingly complex business environment, firms have expanded the amount of effort devoted to activities such as planning, coordination and control, and consequently have increased their use of producer services. The most distinctive feature of the location of producer services is spatial concentration into Seoul and surrounding region. Especially the degree of the concentration o business services into the Capital Region has been accelerating during the 1990s. The pattern of employment growth and regional distribution of producer services show a clear core / periphery disparity. Much of the regional inequality in producer services is largely due to variation in demand associated with the pattern of corporation headquarters with the pattern of corporation headquarters and branch plants location with large manufacturing firms. The analysis of spatial division of labor reflects that producer services are related to the location of headquarters in manufacturing industry. Headquarters in manufacturing firms and business service firms tend to cluster each other. Most of the headquarters spatially separated from branch offices are clustered heavily in Seoul. Especially headquarters of business services and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have a linkage pattern on a nationwide scale. It is viewed have little potential for generating local multiplier effects and regional development. In the light of the result of this study, producer services are not likely to disperse soon to peripheral regions. Consequently the absence of policies directed at enhancing producer sevice in the periphery, concentration tendency would continue to reinforce the core's dominance at the expense of peripheral regions. From a regional perspective, the quality of a region's producer service sector is a key determinant of economic growth, since manu industrial location decisions are influenced by the differential availability of producer services among regions. Poor performance of producer services in peripheral regions seemed to be linked to the region's manufacturing base. Low-wage, standardized branch plants are not likely to induce the growth in knowledge intensive services associated with high-technology corporate headquarters. Producer services may help to create and attract new business including manufacturing firms, and also to enhance the productivity and competitiveness of local firms. Therefore the provision of service producing activities would be lead not only to generate and retain endogenous development but also to attract external firms, especially small and medium sized firms which have a lower propensity of internalized services. Hence, it may be more efficient to create and expanse new locally owned producer services rather than to attract branch plants of mult-locational firms in order to make indigenous economic development.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.33-41
• /
• 2003

A simplified simulation model is designed to investigate the vacuum-driven bonding of glass panels in the cell process for LCD manufacturing. The bonding process is modelled by the transient flow of a weakly-compressible fluid in a very thin channel between two horizontal glass panels. An order of magnitude scaling analysis is conducted based on the characteristic feature of the channel of which height is much smaller than the horizontal length scales. It is revealed that the flow in the channel is represented by a Poiseuille flow of a compressible fluid. A finite volume model has been constructed to acquire the numerical solution to the derived simplified equations. For a simple test problem of pressure-driven microchannel flow, an assessment is made of the accuracy and validity of the proposed model. The basic aspects of vacuum-driven bonding are examined numerically, and the applicability of the present simulation model is illustrated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1743-1752
• /
• 1996

In this paper, a precision inspection technique using CAD/CAI integration is proposed for the parts having very thin and sharp 3 dimensional curve features. The technique begings with feature reconstruction of turbine blades which have 3 dimensional combined feometry, such as splines, and thin circles. The alifnment procedures consistsb of two phases-rough and fine phases : rough phase alignment is based on the conventional 6 point5s probing on the clear cut surfacef, and fine phase alignment is based on the intial measurement on the 3 dimensional curved parts using an lterative measurement feed-back least sequares technique for alignment. Forf the analysis of profile tolerance of parts, the actual measured points are obtained by finding the closet points on the CAD geometry by the developed subdivision technique and the Tschebycheff norm is applied based on iterative fashion, giving accurate profile tolerance value. The developed inspection technique is applied to practical procedures of blade manufacturing and demonstrated high performance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.658-665
• /
• 2012

Micro-EDM is widely used in metallic pattern, electronics, nuclear power and industry in the form of precision process. The improvement of Electro Discharge Machining has been on a steady progress since $19^{th}$ century. The technology has overcome the limits of the traditional precision process, enabling micro-EDM, micro electrolytic machining, micro drilling, micro punching and laser beam machining, which create versatile products with smaller sizes. What have been known about the major feature of Micro-EDM is high thermal energy so that their products are free from the hardness of their products as long as they are electrical conductor. However, each metal is suspected to have different features and natures even if they are created through the same procedure. In this thesis, the methodology of Micro-EDM and how to categorize them are explained. Also, the nature of the examined materials with surface shape and surface roughnes are analyzed. The results of the experiments are expected to understand surface roughness and workability of other materials for Micro-EDM.