• 한국시뮬레이션학회논문지
• /
• 제14권2호
• /
• pp.15-24
• /
• 2005

The goal of a distributed simulation such as battle field simulation is to combine all kinds of simulations in the same synthetic environment and to make people interact at the same time. It is a key issue to share the same synthetic environment among simulations. To support reusability and affordability in the modeling and simulation area, DMSO(Defense Modeling and Simulation Office) of USA developed concepts such as HLA(High Level Architecture) and SEDRIS (Synthetic Environmental Data Representation and Interchange Specification). In the industrial simulation area, the digital manufacturing is the main stream. To reduce cost and to reuse simulation environment, the standardization becomes the focus of digital manufacturing. This study proposes to use SEDRIS to improve interoperability of manufacturing data. The simulation data of DELMIA, which is a leading commercial digital manufacturing solution, is mapped and translated into the SEDRIS transmittal format. Mapping of the manufacturing simulation data and the synthetic environment are implemented and verified through experiments.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.131-145
• /
• 2003

A strategic plan for an immediate situation must be present in a business enterprise to deal actively and efficiently with the demand environment of new customer. The purpose of this paper is to provide research about the manufacturing strategy situations of the Korean manufacturing company. And this paper is a part of Modeling on Manufacturing Strategy. We emphasizes the importance of dynamism and complexity on the competitive environment, and classify the manufacturing strategy by trade-off model, cumulative model, sandcone model, strategic fit model, and competitiveness model.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.107-121
• /
• 2005

The growth and survival of a enterprise depend upon its proper strategic capability against the rapid change in environment. The enterprise that well accommodates the changing environment and properly uses the resources will continue its growth. The problems in accommodating business environment are how to focus the limited manufacturing strategy on certain point. The manufacturing innovation program receives a large effect in the manufacturing strategy. Consequently it follows the degree with manufacturing innovation program agrees with the manufacturing strategy determine the maximization of the manufacturing and management performance.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.77-83
• /
• 2009

The manufacturing industry is the one with the most frequent industrial disasters, and it is important to study the safety climate recognized by workers in the industry in order to actively prevent industrial accidents. However, little research has been performed on the safety climate in workplaces felt by the workers in the manufacturing industry. The purpose of this study is to identify the factors affecting work environment safeness based on practical analysis via survey, and to establish the relation between safety performance factors and safeness of work environment. The survey was performed for workers in the manufacturing industry(n=228), and structural equations model analysis by using the AMOS 7.0 was performed in order to identify the fit of the research model and the causation among factors. According to the results of the analysis, the reliability and the model fit were appropriate for interpretation, and safety participation was shown to affect safeness of work environment more than safety compliance. The results of this study may serve as the reference for taking a measure to improve the level of safeness of the work environment felt by workers in the manufacturing industry.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.7-12
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2002

The manufacturing paradigm has shifted dramatically over the past decade from “push” or mass production mode to “pull” or customer-driven, order-based manufacturing mode, as multitudes of customers now demand mass customization of configurable products. As a means to achieve such rapidly responsive manufacturing system, Advanced Planning System (APS) has become an essential software tool for achieving modern “build-to-order” and “configure-to-order” manufacturing environment. APS enables manufacturers to respond to variety of customer demands In real time by instantly configuring manufacturing processes based on specifications described in each purchase orders and providing capable-to-promise information directly to customer by performing rapid “what-if” manufacturing simulated scenarios. This paper discusses the working of such system as well as the business processes that incorporate such systems to enable efficient “build-to-order” environment.

• 산업경영시스템학회지
• /
• 제24권64호
• /
• pp.77-83
• /
• 2001

In this paper, we investigated the relationship between the variables related to manufacturing environment and industrial accident. Also we wish to analyze how much these variables influence in production result of company: the manufacturing performances such as production quantity, quality, cost and delivery. For this investigation, we collected the real data from 16 small/medium-sized manufacturing companies by performing a questionnaire survey and one-site interview with the workers. Sixteen companies were made up of the following four industries: metal processing, machinery manufacturing, chemical products manufacturing and electronic products manufacturing, The data analysis was made using SPSS PC+. Based on the result of the analysis, we came to the conclusion that most of variables related to manufacturing environment and industrial safety were connecting with industrial accident occurrence and also influenced in manufacturing performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.373-376
• /
• 2001

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the ability to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed system embodies a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. we develop a virtual simulator system on Window 98/NT environment of Microsoft, operating system using of the greater part of PC user. Window program have a merit making GUI environment that programmer can use without the expert knowledge about hardware. A suer with the simulator can utilize an interface that makes one to manage the separate task process for each manufacturing module, change operator components and work cells, and easily teach tasks of each task module.

• Journal of the Korean Wood Science and Technology
• /
• 제50권3호
• /
• pp.167-178
• /
• 2022

To investigate the influence of manufacturing environment on bonding performance of mixed cross laminated wood (CLT) using polyurethane (PUR) adhesive, a boiling water soak delamination test according to the temperature and relative humidity was conducted. The 5-ply mixed CLT consisted of Japanese Larch for external and middle layer and yellow poplar for internal layer. The PUR adhesives with different opening times of 10 and 30 minutes were used. The mixed CLT was manufactured according to pressing times of PUR and manufacturing environments of summer and winter. In case of summer environment, the delamination rate of the mixed CLT with pressing time of 4 hours using a PUR adhesive with open time of 10 minutes met the requirements of KS F 2081. In case of winter environment, the delamination rate of the mixed CLT didn't meet the requirements of KS standard. However, it was possible to confirm the effect of improving the adhesive performance by adjusting the pressing time according to the open time of the adhesive under the manufacturing conditions. The delamination rate of CLT with open time 30 minutes PUR, manufactured by indirect moisture supply methods was 11.2% better than direct moisture supply methods. As a result of delamination test in the same condition of relative humidity and adhesive, it was found that the temperature of manufacturing environment influences the adhesive performance.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.135-138
• /
• 2000

This paper is intended to propose what manufacturing configuration (manufacturing planning and shop floor control) is suitable for the tire industry. Basically tire-manufacturing process is mixed-products, parallel-disconnected-flow-shop. Both throughput time and cycle tine are very short, the variety of tires is very high, the setup time is long, shop floor data reporting requirements is high, and there are many equipments and people working. And with no exception, tire industry also now confronts increasing requirements of delivery conformance with the above peculiar characteristics of tire manufacturing and changing market environments, this paper suggests, weekly master scheduling with no MRP is desirable and traditional kanban is right selection for shop floor control/scheduling. This paper describes why this configuration should be, using the manufacturing engineering principles and some new insights like four primitives of parallel flow shop. Generally known that shop with high parallel-product-mix and long setup time isn't good candidate for kanban. The four primitives of parallel flow shop explain why kanban is also useful scheduling technique in that environment.