• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.29-36
• /
• 2023

In order to prevent industrial accidents, this study presented a methodology to ensure that risk aggravating factors are reflected in risk assessments at manufacturing sites and demonstrated it by applying it to actual manufacturing sites. As a result of a statistical analysis of all 242,906 accidents that occurred in the manufacturing industry over the past 10 years, new workers less than 6 months old, foreign workers, older workers over 55 years old, and jobs where hands and arms are exposed to risk areas, Non-routine work performed from 9 o'clock to 12 o'clock showed a significantly high accident rate. In addition, a weighted value was applied to estimate the possibility of an accident at the risk determination stage through focus group interviews. Through the results of this study, risk weighting factors can be quantitatively reflected in risk assessment, which is meaningful in preventing accidents by evaluating the size of the identified risk closer.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.135-150
• /
• 2019

Under the Manufacturing Liability Act, consumers want to be protected from manufacturers by mitigating burden of proof as an important target to be protected. However, due to the complexity of the product, it is very difficult for consumers to prove defects from the manufacturing defect. This situation has led to a major revision of the Manufacturing Liability Act, which mitigates the burden of proof of consumers by applying fruitless liability. The Manufacturing Liability Act is comparable to the U.S., which has strong consumer rights and is protected by the Manufacturing Liability Act. The burden of proof can be regarded as the most necessary content for consumers within the manufacturing product liability law when responding to manufacturing defects. The U.S. intends to provide implications for achieving consumer protection in Korea's Manufacturing Liability Act by imitating the U.S. based on the burden of proof. Case comparison regarding burden of proof can be conducted based on various criteria, including criteria for each product and key features for determining the importance of the manufacturing product liability law. The Act on the Responsibility of Korean Manufacturing Products for the Protection of Consumers was developed based on the assessment criteria, and a remedy was proposed to protect consumers who suffered from manufacturing defects.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.207-213
• /
• 2002

• Proceedings of the ESK Conference
• /
• 2004.10a
• /
• pp.11-11
• /
• 2004

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.520-524
• /
• 2005

It is consequential to reduce the environmental impact of a product for sustainable development in 21st Century. In the field of transportation, especially, the technological market concerned about reduction and assessment of greenhouse gas emission is expected to be extended. The LCA gas been esteemed and utilized as a realistic alternative greenhouse gas emission is expected to be extended. The LCA has been esteemed and utilized as a realistic alternative to improve the environment by the assessment of environmental impacts. In this study, simplified life cycle assessment(S-LCA), was performed to analyze the environmental impacts quantitatively, which were produced through the life cycle of a electric motor unit(EMU). The object of the present work is rth investigate main parameters of environmental impacts and to establish the plans to improve the environment impact of EMU. As a result of quantitative assessment for environmental impact and manufacturing, the EMU carbody made of SUS showed acidification(AD) and marine water aquatic ecotoxicity(MAET) the most, while that made of Mild showed high impact of global warning(GW) and abiotic resources depletion(ARD). For the SUS EMU, the high AD and MAET impact is occurred by the discharged pollutants during acid-washing process. Also, high value of GW and ARD for Mild EMU is resulted from the consumption of iron ore, coal and crude oil during manufacturing. Therefore, the environment impact of carbody would be decreased by enhancing of energy efficiency and the lightening the weight of it.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.49-51
• /
• 2012

This study was conducted as a part of database construction for development of CO₂ assessment system for concrete to assess CO₂ emissions and analyze characteristics of blast furnace slag manufactured in Korea through life cycle assessment method. For this, life cycle CO₂ emissions assessment technique for construction materials was examined. The entire manufacturing process for blast furnace slag was analyzed on blast furnace slag manufacturer in Korea for application of assessment technique. Life cycle CO₂ assessment was performed on blast furnace slag after classifying assessment process into raw material production step, raw material transportation step and construction material manufacture step.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.249-256
• /
• 2018

This article aims to provide a systematic review of the exposure assessment methods used to assign wafer fabrication (fab) workers in epidemiologic cohort studies of mortality from all causes and various cancers. Epidemiologic and exposure-assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until 2017. The studies found various outcomes possibly linked to fab operations, but a clear association with the chemicals in the process was not found, possibly because of exposure assessment methodology. No study used a tiered assessment approach to identify similar exposure groups that incorporated manufacturing era, facility, fab environment, operation, job and level of exposure to individual hazardous agents. Further epidemiologic studies of fab workers are warranted with more refined exposure assessment methods incorporating both operation and job title and hazardous agents to examine the associations with cancer risk or mortality.

• Particle and aerosol research
• /
• v.7 no.4
• /
• pp.113-121
• /
• 2011

The aerosol nanoparticles are suspected to be exposed to workers in nanomaterial manufacturing facilities. However, the exposure assessment method has not been established. One of important issues is to characterize background level of nanoparticles in workplaces. In this study, intensive aerosol measurements were made at a $TiO_2$ manufacturing laboratory for five consecutive days in May of 2010. The $TiO_2$ nanoparticles were manufactured by the thermal-condensation process in a heated tube furnace. The particle number size distribution was measured using a scanning mobility particle sizer every 5 min, in order to detect particles ranging from 14.5 to 664 nm in diameter. Total particle number concentration shows a severe diurnal variation irrespective of manufacturing process, which was governed by nanoparticles smaller than 50 nm in diameter. During the background monitoring periods, significant peak concentrations were observed between 2 p.m. and 3 p.m. due to the infiltration of secondary aerosol particles formed by photochemical smog. Although significant increase in nanoparticle concentration was also observed during the manufacturing process twice among three times, these particle peak concentrations were lower than those observed during the background measurement. It is suggested that the investigation of background particle contamination is needed prior to conducting main exposure assessment in nanomaterial manufacturing workplaces or laboratories.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.497-510
• /
• 1995

This study was carried out to assess work ability of manufacturing workers and managerial workers. Subjects were 446 manufacturing workers and 278 managerial workers employed in Gumi industrial complex and the observation period was for 1 month(February to March), 1995. In this study, as a questionnaire for the assessment of work ability, we used the Work Ability Index(WAI) which was developed by Institute of Occupational Health in Finland. Major findings obtained from this study were as follows ; WAI was poor in lower economic condition, shift work, irregular diet group(p<0.05). There were no evident trends of WAS in sex, educational level, obesity index, exercise, smoking, and alcohol drinking. In the groups of sensitive to perception of stress, other industrial classification except textile and electronics, the more than 9 hours work, the evident trends of poor WAS were observed(p<0.01). In the groups of $30\sim39$ years old, $40\sim49$ years old, unmarried, high school, shift work, standard body weight, and regular .diet, WAI between manufacturing workers and managerial workers was significantly different(p<0.01) and WAI of managerial worker was worse than that of manufacturing worker.

• Journal of Climate Change Research
• /
• v.5 no.3
• /
• pp.189-197
• /
• 2014

Carbon footprint of apple was a sum of $CO_2$ emission in the step of manufacturing waste of agri-materials, and greenhouse gas emission during apple cultivation. Input amount of agri-materials was calculated on 2007 Income reference of Apple by Rural Development Administration. Emission factor of each agri- materials was based on domestic data and Ecoinvent data. $N_2O$ emission factor was based on 1996 IPCC guideline. Carbon dioxide was emitted 0.64 kg $CO_2$ to produce 1 kg apple fruit, and carbon dioxide was emitted 43.6% in the step of the manufacturing byproduct fertilizer, 1.3% in the step of the manufacturing single fertilizer, 4.7% in the step of the manufacturing composite fertilizer, 6.3% in the step of the manufacturing agri-chemicals, 14.6% in the step of the manufacturing fuel, 11.5% in the step of the fuel combustion, 17.7% of $N_2O$ emission by nitrogen application and 0.18% of disposal of agri-materials. It is needed for farmers to use fertilization recommendation based on soil testing (soil. rda.go.kr) because scientific fertilization is a major tools to reduce carbon dioxide of apple production. The fertilization recommendation could be also basic data in Measurable-ReporTablele-Verifiable (MRV) system for carbon footprint.