• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.82-95
• /
• 2008

As society has changed to being more knowledge-based, it is necessary that change of paradigm is incorporated into engineering education and the education goals and the assessment method of educational outcomes is developed to promptly meet the needs of the times. A purpose of this study is to measure learning outcomes in coursework of engineering college every semester, which ultimately provides to validate program outcomes. We looked into teaching-learning style of course in the engineering college and analyzed its grade method and tool. By use of a survey, we derived a reasonable method to measure for the learning outcomes in course and presented tools for course-embedded assessment to measure that learning outcomes had been tied to their objectives. These tools are effective to determine that program outcomes and education goals have been achieved, ultimately. In addition, it will help that instruction builds a loop system for better.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.292-299
• /
• 2021

A form of data mining software, based on manufacturing-based IIoT environment with the development of IT technologies are increasingly growing. However, it is difficult to evaluate the software quality in the same form as general software due to the characteristics of the software of a manufacturing company that has a large amount of data that needs to be carried out with big data and data mining. In addition, in a manufacturing-based environment where heterogeneous equipment and software are mixed, it is difficult to perform quality judgment on software used by applying existing quality characteristics. Therefore, in this paper, the characteristics of the manufacturing base are investigated, and a software quality evaluation model suitable for it is developed and evaluated.

• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.58-73
• /
• 2005

The objective of this study is to evaluate the equipment risk before and after SEMI S2-93A implementation, thus providing a guideline for safety improvement. Semiconductor Plant A located in Taiwan's Hsinchu Science Based Industrial Park with 147 manufacturing machines was used for risk assessment. This study was carried out in three steps. First, a preliminary hazard analysis was conducted. A detailed process safety evaluation was conducted (Hazard and Operability Study, HAZOP); and finally, the equipment risk comparison before and after Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation. The preliminary hazard analysis results showed high risk in 21.77% of the manufacturing machines under risk assessment at Plant A. The largest percentage existed in the Diffusion Department. The machine types specified by the hazardous work site review and inspection according to Article 26 of Labor Inspection Regulation (the machines that use such chemicals as, $SiH_4$, HF, HCL, etc. and that are determined to be highly hazardous through preliminary hazard analysis) were added to the detailed process analysis and evaluation. In the third part of this evaluation, the machines at Plant A used for detailed process safety assessment were divided into two groups based on the manufacturing data before and after 1993. The severity, possibility, and actual accident analysis before and after SEMI S2-93A implementation were compared. The Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation can reduce the severity and possibility of hazard occurrence.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2006

Ecotoxicity assessments of 90 selected effluents of 22 industry types from 2002 to 2004 in Korea were evaluated by a toxic battery of bioassay test using fish Oryzias latipes, invertebrate Daphnia magna, algae Selenastrum capricornutum and bacteria Vibrio fischeri with the physicochemical measurement items and permit concentrations on the present Water Quality Conservation Act in Korea. Total toxic unit (${\Sigma}TU$) of 8 industry types of 22 industry types by the toxic battery appeared in order of the value site as follows; Pigment Dye Manufacturing (${\Sigma}TU$ 217.1) > Textile and Dye (${\Sigma}TU$ 39.3) > Semiconductor Electronic Manufacturing (Small) (${\Sigma}TU$ 25.6) > Wastewater and Sewage Treatment Plants (${\Sigma}TU$ 25.4) > Coating (${\Sigma}TU$ 23.8) > Leather Skin Manufacturing (${\Sigma}TU$ 18.0) > Synthetic Resin Manufacturing (${\Sigma}TU$ 15.6) > Assemble Metal Manufacturing (${\Sigma}TU$ 10.7). Our results demonstrate that ecotoxicity assessment, by bioassay test, is effective and practical for industrial wastewater management for 90 selected effluents with the limitation of the physicochemical permit. Among 90 effluents, 9 samples failed physicochemical permit limitation and 81 passed it. In result of ecotoxicity assessment of 90 effluents by the toxic battery, 76 effluents exhibited ecotoxicity and the others did not. The physicochemical measurement items and permit concentrations on the present Water Quality Conservation Act in Korea were low related to the ecotoxicity value by the toxic battery and appeared limited for water quality management to water-ecosystem and environment-friendly management of water.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.881-888
• /
• 2007

In order to investigate the characteristics of the non-biodegradable material, the $BOD_5/COD_{Cr}$ ratio was used. The average ratio of industrial complex's influent wastewater was 2.29~2.96, the effluent ratio was 4.29~19.0. The removal efficiency of $UV_{254}$ by physicochemical treatment was 22.8~94.7% and 5.3~77.2% by biological treatment, respectively. Of the wastewater removal efficiency for each of the items, the $BOD_5$ treatment efficiency was the greatest at 97.3% and the color & TN treatment efficiency was 40~70%. The study of the economical assessment showed that the complex as well as the individual companies spent 722~1,298 won for each ton of treated wastewater. All of the wastewater treatment facilities spent the most money on chemicals needed to treat the wastewater. The total cost for Nylon manufacturing wastewater treatment plant was the greatest while the total cost for cotton manufacturing wastewater treatment plant turned out to the lowest. As respects of removal efficiency and economocal assessment, Polyester A and Cotton manufacturing wastewater treatment plants were better effective than a dyeing industrial complex wastewater treatment plant.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.305-319
• /
• 2013

In this study, it is intended that utilize the LCA (Life Cycle Assessment) method, to evaluate the environmental impact of wood pellet manufacturing facility. As mentioned above, wood pellet manufacturing facility of 20 has produced wood pellets as a raw material sawdust and wood in our country. In this study, in order to feature manufacturing process of wood pellets that resemble almost necessary to analyze evenly size and characteristics of various equipment whether these reasonable, the characteristics of the equipment may be different, the production of 20 places I surveyed the facility one central timber distribution center one large scale most of the equipment.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.659-668
• /
• 2019

In digital image correlation, speckle image is closely related to the measurement accuracy. A practical global evaluation criterion for speckle image is presented. Firstly, based on the essential factors of the texture image, both the average particle size and image sharpness are used for the assessment of speckle image. The former is calculated by a simplified auto-covariance function and Gaussian fitting, and the latter by focusing function. Secondly, the computation of the average particle size and image sharpness is verified by numerical simulation. The influence of these two evaluation parameters on mean deviation and standard deviation is discussed. Then, a physical model from speckle projection to image acquisition is established. The two evaluation parameters can be mapped to the physical devices, which demonstrate that the proposed evaluation method is reasonable. Finally, the engineering application of the evaluation method is pointed out.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2015

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.49-54
• /
• 2022

In Korea, companies which have work-related musculoskeletal burden works should have conducted legal risk assessments every three years from 2004 onwards. However, due to problems with the legal definition of work-related musculoskeletal burden works, some companies may have been exempted from the risk assessment even though their workers still experience work-related musculoskeletal pain. For example, the manufacturing process used by a particular semiconductor manufacturing company involved a great deal of legal musculoskeletal bueden works. However, this company eliminated the musculoskeletal burden works by continuously introducing automated processes, and finally, in 2016, all work which was legally defined as musculoskeletal burden work were removed from the company's manufacturing process. Nevertheless, in a 2016 survey, 9.6% of the company's workers still complained of musculoskeletal pain, and in a 2019 survey this proportion actually increased to 15.7%. This incident demonstrates the limitations and problems of the current legal risk assessment of work-related musculoskeletal burden work. Therefore, this study proposes two improvements to solve these problems. Firstly, it is necessary to broaden the current legal definition of work-related musculoskeletal burden works. For example, vibration risk factors and push/pull tasks that are currently missing from the definition should be included. Secondly, it is proposed that a survey on musculoskeletal pain should be conducted for all workers, regardless of whether they are engaged in musculoskeletal burden works. The results of this study could be used to improve the legal risk assessment of work-related musculoskeletal burden works.

• International Journal of Quality Innovation
• /
• v.8 no.3
• /
• pp.35-45
• /
• 2007

This paper describes the development of a scale for measuring top management commitment towards continual quality performance improvement in small and medium-sized enterprises (SMEs). A set of self-assessment questions of the ISO 9004: 2000 Standard was used to assess the adoption status of quality management practices. This paper investigates the inter-item reliability and the content validity of the Quality Management Principles Scale (QMPS) in an integrated improvement process in SMEs. An empirical study was conducted to acquire senior management views on the use of the QMPS in manufacturing sectors in Trinidad and Tobago. Based on 328 responses from 110 SMEs, statistical software packages were used to analyse the empirical data and determine the reliability and validity of the QMPS. The paper contributes to develop a self-assessment scale that can be used to measure top management commitment. It is anticipated that the findings would provide practical insights for evaluating the levels of maturity on performance improvement in SMEs.