• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.82-88
• /
• 2005

In this study, the physical compensator made with the high density material, Cerrobend, and the electronic compensator realized by the movement of a dynamic multileaf collimator were analyzed in order to verify the properness of a design function in the commercial RTP (radiation treatment planning) system, Eclipse. The CT images of a phantom composed of the regions of five different thickness were acquired and the proper compensator which can make homogeneous dose distribution at the reference depth was designed in the RTP. The frame for the casting of Cerrobend compensator was made with a computerized automatic styrofoam cutting device and the Millennium MLC-120 was used for the electronic compensator. All the dose values and isodose distributions were measured with a radiographic EDR2 film. The deviation of a dose distribution was $\pm0.99 cGy\;and\;\pm1.82cGy$ in each case of a Cerrobend compensator and a electronic compensator compared with a $\pm13.93 cGy$ deviation in an open beam condition. Which showed the proper function of the designed compensators in the view point of a homogeneous dose distribution. When the absolute dose value was analyzed, the Cerrobend compensator showed a $+3.83\%$ error and the electronic compensator showed a $-4.37\%$ error in comparison with a dose value which was calculated in the RTP. These errors can be admtted as an reasonable results that approve the accuracy of the compensator design in the RTP considering the error in the process of the manufacturing of the Cerrobend compensator and the limitation of a film in the absolute dosimetry.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1285-1297
• /
• 2020

In this study, we report the results of a study on the clinical evaluation of wrinkle improvement by developing a method for liposome of high-purity Centella asiatica extract used in pharmaceuticals and cosmetics, and a cream using the same. In order to make Centellasome-10EX stabilizing centella asiatica extract in liposome lamella vesicle, it could be completed using 5% hydrogenated lecithin and 2% sucrose distearate. The appearance of Centellasome-10EX was a creamy form of low viscosity, the color was pale yellow, and the odor had the inherent odor of the raw material. The pH was about 6.12, the specific gravity was 1.09, and the acid value was about 0.35. The content of the main constituents of centella asiatica extract contained in the liposome vesicle contains 10,800 ppm of asiatic acid, 10,900 ppm of asiaticoside, 6,000 ppm of madecasic acid, and 1,600 ppm of madecassoside, and long-term storage. There was no discoloration even at the time, and it was found that the main component remained stable thermodynamically. To mechanistically analyze the structure of the liposome vesicle of Centellasome-10EX, as a result of observation with a transmission electron microscope (Cryo-TEM), the multilayer vesicles are formed and filled with moisture, and there are 10 to 60 multilayers around it. It was confirmed that the liposome lamella vesicle was formed. As a clinical trial (in-vivo) test, the moisturizing effect of centellasome cream after application for 5 weeks was 28.3%, which was significantly increased compared to placebo. The skin elasticity effect was 13.6%, which significantly increased the moisturizing power than the placebo. The effect of improving fine wrinkles around the eyes was improved by 23.52% compared to placebo cream. Through the results of this study, it was possible to study the formulation and manufacturing method for encapsulation and stabilization of the developed Centellasome-10EX in the liposome vesicle. It is expected that the results obtained through clinical research on the wrinkle improvement effect of the cream using this can be widely used to study skin science in the cosmetic industry and to develop high-quality cosmetics with high efficacy.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.386-391
• /
• 2009

To verify the possibility of manufacturing a germinated rough rice tea, germinated rough rice was roasted at 200, 220, and $250^{\circ}C$ for 10, 20, and 30 min. The treated rice powder was then put into tea bags and leached for 1, 3, and 5 min, after which their antioxidant, physicochemical, and sensory characteristics were compared. The total polyphenol content and 2,2'-Azino-bis-(3-ethyl benzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activities of the germinated rough rice tea increased as the roasting temperature increased as well as in response to increased roasting and leaching times. Furthermore, the greater the roasting temperature, roasting time, and leaching time, the greater the increase in total soluble solid contents. Moreover, the turbidity and browning index of the germinated rice tea rose as the roasting temperature, roasting time, and leaching time increased. Additionally, the pH tended to decrease as the roasting temperature, roasting time, and leaching time increased. Evaluation of the sensory characteristics of the germinated rice tea revealed that the formation of a Maillard reaction product in the course of heating the rice added a unique flavor, which led to increase preference for the color, flavor, and taste, and therefore, the overall preference.

• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.416-421
• /
• 1997

Physicochemical properties of six cultivars of Cheju citrus fruits were investigated according to the harvest date. The fruit index of Citrus. unshiu Marc. var. miynawa, C. $natsudaidai{\;}H_{AYATA}$ and C. sudachi ranged from 1.14 to 1.38 with oval form. The fruit index of C. grandis OSEECK, C. aurantiun LINN and C. platymamma. Hort. SWINGLE ranged from 0.89 to 1.03 with a round form. The fruit weight showed the heaviest in C. grandis, followed by C. natsudaidai, C. aurantiun, C. unshiu, C. platymamma and C. sudachi. The rate of flesh showed the highest in C. unshiu, followed by C. platymamma, C. nat녀daidai, C. sudachi, C. grandis and C. aurantiun. The ratio of juice showed the highest in C. unshiu, followed by C. sudachi, C. platymamma., C. natsudaidai,, C. grandis, C. aurantiun. C. unshiu and C. platymamma, which showed a possibility to be used as raw materials for juices. The soluble solid and the Brix/acid ratio of all the varieties increased as the fruits ripen. Especially those of C. unshiu and C. platymamma were high(10.39, 7.67) in full ripe compared to other varieties. Acid content of C. natsudaidai, C. aurantiun, C. grandis and C. sudachi was sustained higher than $3{\sim}5%$ from the middle of September to the middle of January, and there was the possibility of manufacturing aromatic products like citrus vinegar. The C. sudachi contained the highest content of vitamin C,77.48 mg/100 g. The correlation between vitamin C extraction and season was insignificant. Rind and color value of all varieties were investigated, and the value of the L, a and b increased as the fruits were ripen. The value of a of rind of C. $natsudaidai{\;}H_{AYATA}$ and C. grandis until the end of November was negative. This means that their color was not presented by November since the chlorophyll was in the rind, unlike the colors of the rind of C. unshiu, C. sudachi and C. platymamma which were completed by that time.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.263-268
• /
• 2006

The purpose of this study was to monitor and compare the contamination levels of total aerobic bacteria, coliform groups and Escherichia coli from fruit-vegetable salad (FS), aquatic hard-boiled food (AF) and salt-fermented fishery product with spices (SP). The samples of ready-to-eat food were 25 FS, 11 AF and 7 SP. The contamination levels of total aerobic bacteria in FS, AF and SP were $4.56\sim7.45\;log_{10}$ CFU/g (FS), $2.43\sim7.03\;log_{10}$ CFU/g (AF), respectively. The contamination levels of coliform groups were $4.51\sim6.71\;log_{10}$ CFU/g (SP). $4.00\sim6.66\;log_{10}$ CFU/g (FS), $1.70\sim5.20\;log_{10}$ CFU/g (AF), respectively. The contamination levels of E. coli were $2.50\sim4.42\;log_{10}$ CFU/g (SP), $0\sim3.58\;log_{10}$ CFU/g (FS), $1.11\sim4.68\;log_{10}$ CFU/g (AF), respectively. The difference of completed packaging salad and instant packaging salad are not different about contamination levels. In conclusion, the results of this study indicated that the hygienic levesl of salads, hard-boiled foods and salted fishes were very poor. So our government need to improve the control plan for food safety from manufacturing process to market.

• Journal of Food Hygiene and Safety
• /
• v.37 no.2
• /
• pp.97-106
• /
• 2022

Listeria monocytogenes (L. monocytogenes) is one of gram-positive foodborne pathogens with a very high fatality rate. Unlike most foodborne pathogens, L. monocytogenes is capable of growing at low temperatures, such as in refrigerated foods. Thus, various physical and chemical prevention methods are used in the manufacturing, processing and distribution of food. However, there are limitations to the methods such as possible changes to the food quality and the consumer awareness of synthetic preservatives. Thus, the aim of this study was to evaluate the anti-listeria activity of lactic acid bacteria (LAB) isolated from kimchi and characterize the bacteriocin produced by Lactococcuslactis which is one of isolated strains from kimchi. The analysis on the anti-listeria activity of a total of 36 species (Lactobacillus, Weissella, Lactobacillus, and Lactococcus) isolated from kimchi by the agar overlay method revealed that L. lactis NJ 1-10 and NJ 1-16 had the highest anti-listeria activity. For quantitatively analysis on the anti-listeria activity, NJ 1-10 and NJ 1-16 were co-cultured with L. monocytogenes in Brain Heat Infusion (BHI) broth, respectively. As a result, L. monocytogenes was reduced by 3.0 log CFU/mL in 20 h, lowering the number of bacteria to below the detection limit. Both LAB strains showed anti-listeria activity against 24 serotypes of L. monocytogenes, although the sizes of clear zone was slightly different. No clear zone was observed when the supernatants of both LAB cultures were treated with proteinase-K, indicating that their anti-listerial activities might be due to the production of bacteriocins. Heat stability of the partially purified bacteriocins of NJ 1-10 and NJ 1-16 was relatively stable at 60℃ and 80℃. Yet, their anti-listeria activities were completely lost by 60 min of treatment at 100℃ and 15 min of treatment at 121℃. The analysis on the pH stability showed that their anti-listeria activities were the most stable at pH 4.01, and decreased with the increasing pH value, yet, was not completely lost. Partially purified bacteriocins showed relatively stable anti-listeria activities in acetone, ethanol, and methanol, but their activities were reduced after chloroform treatment, yet was not completely lost. Conclusively, this study revealed that the bacteriocins produced by NJ 1-10 and NJ 1-16 effectively reduced L. monocytogenes, and that they were relatively stable against heat, pH, and organic solvents, therefore implying their potential as a natural antibacterial substance for controlling L. monocytogenes in food.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1209-1215
• /
• 2022

The selective catalytic reduction (SCR) is known as a very efficient method to reduce nitrogen oxides (NOx) and the catalyst performs reduction from nitrogen oxides (NOx) to nitrogen (N₂) and water vapor (H2O). The catalyst, which is one of the factors determining the performance of the nitrogen oxide (NOx) ruduction method, is known to increase catalyst efficiency as cell density increases. In this study, the reduction characteristics of nitrogen oxides (NOx) under various engine loads investigated. A 100CPSI(60Cell) catalysts was studied through a laboratory-sized simulating device that can simulate the exhaust gas conditions from the power generation engine installed in the training ship SEGERO. The effect of 100CPSI(60Cell) cell density was compared with that of 25.8CPSI(30Cell) cell density that already had NOx reduction data from the SCR manufacturing. The experimental catalysts were honeycomb type and its compositions and materials of V₂O₅-WO₃-TiO₂ were retained, with only change on cell density. As a result, the NOx concentration reduction rate from 100CPSI(60Cell) catalyst was 88.5%, and IMO specific NOx emission was 0.99g/kwh satisfying the IMO Tier III NOx emission requirement. The NOx concentration reduction rate from 25.8CPSI(30Cell) was 78%, and IMO specific NOx emission was 2.00g/kwh. Comparing the NOx concentration reduction rate and emission of 100CPSI(60Cell) and 25.8CPSI(30Cell) catalysts, notably, the NOx concentration reduction rate of 100CPSI(60Cell) catalyst was 10.5% higher and its IMO specific NOx emission was about twice less than that of the 25.8CPSI(30Cell) catalysts. Therefore, an efficient NOx reduction effect can be expected by increasing the cell density of catalysts. In other words, effects to production cost reduction, efficient arrangement of engine room and cargo space can be estimated from the reduced catalyst volume.

• Korean Journal of Agricultural Science
• /
• v.25 no.1
• /
• pp.52-67
• /
• 1998

The investigative research on the mammalian milk purely consisted of the physiological quality of lactoferrin was conducted to reveal the antimicrobial ativity of specifically functional foods with antibiotic characteristics as a basic data in food manufacturing. Bovine lactoferrin were isolated from raw milk samples, and was digested with pepsin, trypsin and chymotrypsin. It was necessary then to separate and purify lactoferrin from bovine raw milk, and in order to analyze the antimicrobial activity of the enzyme-treated bovine lactoferrin in their required quantitative fraction. Afterwards Escherichia coli and Staphylococcus aureus was incubated in it. It was that investigated to enzyme-treated fractions molecular weight and the peptide fragment with antimicrobial effect. 1. The purity of enzyme-treated bovine lactoferrin(BLF) was tested by SDS-PAGE. As a results of 12% SDS-PAGE assay, pepsin-treated LF did not exhibited band until if reaches 14 KDa, while trypsin and chymotrypsin treated LF, known to contain the non-digestive lactoferrin exhibited band at a molecular weight of 33 KDa. 2. Bovine lactoferrin was sucessfully purified through the use of Sephadex G-50 Column. In order to assay LF through the Sephadex G-50 column chromatography, the digestive bovine lactoferrin (BLFs) was eluted with a linear gradient of 0.05% Tris-HCl. When the gel-filtration analysis, pepsin, trypsin and chymotrypsin treatments of BLF fragments was showed 2, 3, and 2 peak, respectively. The results of the HPLC analysis confirmed that had a non-digestive lactoferrin receptor, and trypsin and chymotrypsin treated BLFs has an antimicrobial effect. 3. To measure the strength of the antimicrobial effect of enzyme treated lactoferrin it was compared to the antimicrobial activity taking place at the incubated Escherichia coli and Staphylococcus aureus. This might explain the resistance of the microorganisms for peptide fragment. The pepsin-treated of bovine lactoferrin was markedly reduced by incubation of the cells. Trypsin-treated of BLF was similar to chymotrypsin-treated of BLF. However, trypsin and chymotrypsin treatments of BLFs were showed the antimicrobial effect until eight hours incubation for native bovine lactoferrin. Therefore the enzyme-treated lactoferrin have an antimicrobial effect even non-digestive lactoferrin. 4. The digestive bovine lactoferrin fragments assay was carried out by the use of Sephadex G-50 column chromatography and SDS-PAGE. The pepsin and chymotrypsin-treated fragments has a low molecular weight and trypsin-treated lactoferrin was only showed a band. It was described that characteristics of digestive protein. It appeared that there may be a relation between virulence and resistance to enzyme-treated BLF.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.41-76
• /
• 2020

This study confirmed factors affecting smart factory technology acceptance through empirical analysis. It is a study on what factors have an important influence on the introduction of the smart factory, which is the core field of the 4th industry. I believe that there is academic and practical significance in the context of insufficient research on technology acceptance in the field of smart factories. This research was conducted based on the Unified Theory of Acceptance and Use of Technology (UTAUT), whose explanatory power has been proven in the study of the acceptance factors of information technology. In addition to the four independent variables of the UTAUT : Performance Expectancy, Effort Expectancy, Social Influence, and Facilitating Conditions, Government Assistance Expectancy, which is expected to be an important factor due to the characteristics of the smart factory, was added to the independent variable. And, in order to confirm the technical factors of smart factory technology acceptance, the Task Technology Fit(TTF) was added to empirically analyze the effect on Behavioral Intention. Trust is added as a parameter because the degree of trust in new technologies is expected to have a very important effect on the acceptance of technologies. Finally, empirical verification was conducted by adding Innovation Resistance to a research variable that plays a role as a moderator, based on previous studies that innovation by new information technology can inevitably cause refusal to users. For empirical analysis, an online questionnaire of random sampling method was conducted for incumbents of domestic small and medium-sized enterprises, and 309 copies of effective responses were used for empirical analysis. Amos 23.0 and Process macro 3.4 were used for statistical analysis. For accurate statistical analysis, the validity of Research Model and Measurement Variable were secured through confirmatory factor analysis. Accurate empirical analysis was conducted through appropriate statistical procedures and correct interpretation for causality verification, mediating effect verification, and moderating effect verification. Performance Expectancy, Social Influence, Government Assistance Expectancy, and Task Technology Fit had a positive (+) effect on smart factory technology acceptance. The magnitude of influence was found in the order of Government Assistance Expectancy(β=.487) > Task Technology Fit(β=.218) > Performance Expectancy(β=.205) > Social Influence(β=.204). Both the Task Characteristics and the Technology Characteristics were confirmed to have a positive (+) effect on Task Technology Fit. It was found that Task Characteristics(β=.559) had a greater effect on Task Technology Fit than Technology Characteristics(β=.328). In the mediating effect verification on Trust, a statistically significant mediating role of Trust was not identified between each of the six independent variables and the intention to introduce a smart factory. Through the verification of the moderating effect of Innovation Resistance, it was found that Innovation Resistance plays a positive (+) moderating role between Government Assistance Expectancy, and technology acceptance intention. In other words, the greater the Innovation Resistance, the greater the influence of the Government Assistance Expectancy on the intention to adopt the smart factory than the case where there is less Innovation Resistance. Based on this, academic and practical implications were presented.