• 한국대기환경학회지
• /
• 제26권4호
• /
• pp.443-448
• /
• 2010

The objective of this study was to assess the catalytic activities of manganese oxide (MnO, $MnO_2$, $Mn_2O_3$, and $Mn_3O_4$) catalysts for odors (acetaldehyde and propionaldehyde) removal. We used a fixed bed reactor as the experimental apparatus and the catalytic performance were carried out over the temperature range of $200{\sim}470^{\circ}C$. The properties and performance of catalysts were characterized by the X-ray diffraction (XRD) and Brunauer Emmett Teller (BET). The catalytic activities of manganese oxide catalysts for acetaldehyde combustion were in the order of MnO < $MnO_2$ < $Mn_2O_3$ < $Mn_3O_4$, and it is similar to that of propionaldehyde combustion. We also confirmed that the reactions have well followed the kinetic model of Power-Rate Law and the reaction order (n) is 1 for both of the acetaldehyde and propionaldehyde combustion. In addition, the reaction activation energy of acetaldehyde and propionaldehyde combustion over $Mn_3O_4$ were found to be $72.42\;kJmol^{-1}$ for 487~503 K and $51.14\;kJmol^{-1}$ for 473~533 K, respectively.

• Korean Chemical Engineering Research
• /
• 제44권2호
• /
• pp.193-199
• /
• 2006

${\gamma}-Al_2O_3$에 담지한 Cu-Mn 산화물 촉매에서 톨루엔 완전산화 반응을 $160{\sim}280^{\circ}C$의 온도 범위에서 고정층 반응기로 조사하였다. BET, SEM, TPR, TPO, XPS 및 XRD를 이용하여 촉매 특성분석을 하였다. 톨루엔의 완전산화 반응은 $280^{\circ}C$ 이하에서 이루어졌으며, 적절한 Cu-Mn 담지량은 15.0 wt％Cu-10.0 wt％Mn인 것으로 나타났다. TPR/TPO 및 XPS 분석 결과, 15 Cu-10 Mn 촉매의 산화환원 봉우리가 낮은 온도로 이동하였으며 결합에너지가 높은 값으로 이동하였다. XRD 결과, 고분산된 Mn 산화물과 CuO 보다 $Cu_{1.5}Mn_{1.5}O_4$의 촉매활성 인자로서의 역할이 더욱 우수한 것으로 추측되며, 촉매의 활성은 촉매의 산화환원 능력과 촉매의 높은 산화 상태에 기인하는 것으로 사료된다.

• 대한환경공학회지
• /
• 제31권4호
• /
• pp.278-286
• /
• 2009

본 연구에서는 망간원석을 포함한 4종의 천연망간산화물($NMO_1\;NMO_4$)을 대상으로 물질특성(결정상, 표면형태)과 1-naphthol (1-NP)에 대한 제거반응 특성을 회분식 실험을 통하여 수행하였고, 그 결과를 버네사이트에서의 결과와 비교 분석하였다. 천연망간산화물은 출처에 따라 버네사이트(${\delta}-MnO_2$)외에도 크립토멜란(${\alpha}-MnO_2$), 연망간석(${\beta}-MnO_2$) 등의 다양한 표면 특성을 동시에 가지고 있었으며, 이러한 표면 특성으로 인해 제거효율(제거율, 반응속도) 및 제거반응(흡착 또는 산화-변환제거)에서 차이를 보였다. 특히, $NMO_1$(전해망간산화물)은 버네사이트에 비교해서도 우수한 1-NP의 산화-변환 제거효율을 보임을 알 수 있었다. 망간산화물에 의한 1-NP의 제거는 모두 유사-일차속도 식을 따랐으며, 각 망간산화물의 비표면적으로 표준화하여 얻은 속도상수($k_{surf},\;L/m^2$ min) 값은 $NMO_1(3.31{\times}10^{-3})$>${\delta}-MnO_2(1.48{\times}10^{-3}){\fallingdotseq}NMO_3(1.46{\times}10^{-3})$>$NMO_2(0.83{\times}10^{-3})$>$NMO_4(0.67{\times}10^{-3})$의 순이었다. 또한, 반응후 침전층에 대한 용매추출실험을 통해 평가한 1-NP의 산화-변환 반응효율은 $NMO_1{\fallingdotseq}{\delta}-MnO_2$>$NMO_3$>$NMO_4{\gg}NMO_2$의 순이었으며, 반응산물은 반응여액(상등액)에 대한 HPLC 크로마토그램, UV-vis. 흡광도비($A_{2/4}$, $A_{2/6}$) 분석을 통해 버네사이트에서와 같이 1-napthol의 산화-결합 반응에 의한 것임을 확인하였다. 이상의 결과로부터 본 실험에 사용한 천연망간산화물($NMO_2$ 제외)은 1-NP의 제거에 효과적으로 적용될 수 있으며, 반응효율은 망간산화물의 출처에 따른 표면특성에 따라 차이가 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.801-804
• /
• 2002

Electrochemical capacitors are becoming attractive energy storage systems particularly for applications involving high power requirements such as hybrid systems consisting of batteries and electrochemical capacitors for electric vehicle propulsion. Both of amorphous cobalt oxide and manganese dioxide were prepared by sol-gel process reported in our previous work. Nanostructured supramolecular oligomer of 1,5-diaminoanthraquinone(DAAQ) coated metal oxides were successfully prepared by electrochemical oxidation from an acidic non-aqueous medium. We established process parameters of the technique for the formation of nano-structured materials. Furthermore, improved the capacitive properties of the nano structured metal oxide electrodes using controlled solution chemistry. $CoO_2$ and $MnO_2$-based composite electrode showed relatively good electrochemical behaviors in acidic electrolyte system with respect to specific capacity and scan rate dependency.

• 한국안전학회지
• /
• 제6권4호
• /
• pp.26-33
• /
• 1991

To remove SO$_2$ from flus gas, cupric oxide, manganese oxide and iron oxide were studied with varying loading value. The experiment was carried out in a flow reactor and the reactants were prepared by impregnation method using alumina. The reaction temperature was varied from 30$0^{\circ}C$ to 45$0^{\circ}C$. Experimental results showed that all of these metal oxides were effective on SO$_2$ removal reaction and cupric oxide was the best reactant. The sample with 10wt％ loading value was better reactant than with 20wt％ because in case of 20wt％ loading, metal dispersion on the alumina surface was not uniform. And the SO$_2$ removal efficiency was increased with the reaction temperature.

• 한국농공학회논문집
• /
• 제51권4호
• /
• pp.43-47
• /
• 2009

Soil aggregation is an important part of influencing the soil behaviors in reducing rainfall-runoff and soil erosion, aeration, infiltration, and root penetration. Some inorganic materials such as clay minerals, Fe and Al oxides/hydroxides, and calcium carbonate can act as cementing agents within macroaggregates. The objective of this study was to determine the effects of different cementing agents (Fe, Mn, and Al) on soil aggregate formation in reclaimed tidelands. Water stable aggregate ratio and MWD (mean weight diameter) were higher in iron dioxides treatment than two other treatments. This result indicates significant correlation between soil aggregate formation and iron dioxides.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.164-166
• /
• 2002

Over the past two decades, the electrochemical supercapaictors are receiving growing attention due to their possible applications as power backup in electronic equipment and electrical vehicles. Both of amorphous cobalt oxide and manganese dioxide were prepared by sol-gel process reported in our previous work. Nano-structured supramolecular oligomer of 1,5-diamino anthraquinone(DAAQ) coated metal oxides were successfully prepared by electrochemical oxidation from an acidic non-aqueous medium. We established process parameters of the technique for the formation of nano-structured materials. Furthermore, improved the capacitive properties of the nano structured metal oxide electrodes using controlled solution chemistry. $CoO_2$ and $MnO_2$-based composite electrode showed relatively good electrochemical behaviors in acidic electrolyte system with respect to specific capacity and scan rate dependency

• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.353-361
• /
• 2006

As one of the thermochemical water splitting hydrogen production cycles, which could be operated at the lower temperature below 1200 K, we investigated the feasibility of the cyclic operation of Ispra Mark 2 cycle with the addition of $ZrO_2$. The cycle is theoretically composed of three reaction steps; (1) 1st step($2MnO_2{\rightarrow}Mn_2O_3+0.5O_2$), (2) 2nd step($Mn_2O_3+4NaOH{\rightarrow}2Na_2O{\cdot}MnO_2+H_2+H_2O$) and (3) 3rd step($2Na_2O{\cdot}MnO_2H_2O{\rightarrow}4NaOH+2MnO_2$). From the TPR tests, the temperature ranges for $O_2$ production in 1st step and $H_2$ production in 2nd step were $550{\sim}750^{\circ}C$ and $650{\sim}750^{\circ}C$, respectively. In $MnO_2/Mn_2O_3/NaOH$ system, the formation of molten products due to the reaction between manganese oxides and NaOH were greatly decreased with the addition of $ZrO_2$. In addition, the results of a cyclic test were discussed with the viewpoint of $H_2$ production amounts and the feasibility of the process improvement.

• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.461-470
• /
• 1994

방사성 코발트, 스트론 , 세슘의 사암에 대한 수착특성평가 실험을 수행하였다. 수착반응속도론적 평가와 더불어 수착유형 및 가역성 등을파악하였다. 수착반응은 크게 두 단계로 나눌 수 있는데, 초기 10시간 이내에 사암외부표면에 대부분의 수착이 일어나고, 이후에는 사암입자내 미세공극을 통한 내부수착 표면으로의 확산이 수착속도 결정단계로 작용하는 과정이다. 방사성핵종이 지하매질에 수착하는 주된 수착유형을 정량적으로 평가하기 위한 방법으로서 순차적화학추출법을 도입하여 방사성핵종이 수착되어 있는 사암에 대해 탈착 실험을 수행하였다. 특히 이온교환되어 있는 세슘을 탈착시키기 위해 염화칼륨 용액으로 추출하는 공정을 도입하였다. 본 연구에서 고려한 수착유형은 지하수조건에서 가역적 수착, 이온 교환, 철망간산화 /산수소화물과의 결합, 비가역적 고착등이다. 스트론튬은 사암표면에 상대적으로 반응이 빠르고 가역적인 이온교환반응을 하였다. 코발트와 세슘은 복합적인 수착반응 양상을 보였다. 코발트의 경우, 주된 수착유형은 철망간산화 /산수소화물과의 결합이고, 비가역적인 고착도 상당비율 일어났다. 세슘의 경우, 비가역적 고착이 주된 수착유형이였으며, 이온교환도 상당비율 일어났다. 그러므로, 수착반응의 가역성 및 이동성은 스트론튬 ＞ 코발트 ＞ 세슘 순이였다.

• 한국토양비료학회지
• /
• 제44권5호
• /
• pp.727-733
• /
• 2011

A new Korean standard for the determination of Cr(VI) in soils has been officially published as ES 07408.1 in 2009. This analytical method is based on the hot alkaline digestion and colorimetric detection prescribed by U.S. EPA method 3060A and 7196A. The hot alkaline digestion accomplished using 0.28 M $Na_2CO_3$ and 0.5 M NaOH solution (pH 13.4) at $90{\sim}95^{\circ}C$ determines total Cr(VI) in soils extracting all forms of Cr(VI), including water-soluble, adsorbed, precipitated, and mineral-bound chromates. This aggressive alkaline digestion, however, proved to be problematic for certain soils which contain large amounts of soluble humic substances or active manganese oxides. Cr(III) could be oxidized to Cr(VI) by manganese oxides during the strong alkaline extraction, resulting in overestimation (positive error) of Cr(VI). In contrast, Cr(VI) reduction by dissolved humic matter or Fe(II) could occur during the neutralization and acidic colorimetric detection procedure, resulting in underestimation (negative error) of Cr(VI). Futhermore, dissolved humic matter hampered the colorimetric detection of Cr(VI) using UV/Vis spectrophotometer due to the strong coloration of the filtrate, resulting in overestimation (positive error) of Cr(VI). Without understanding the mechanisms of Cr(VI) and Cr(III) transformation during the analysis it could be difficult to operate the experiment in laboratory and to evaluate the Cr(VI) results. For this reason, in this paper we described the theoretical principles and limitations of Cr(VI) analysis and provided useful guidelines for laboratory work and Cr(VI) data analysis.