• 대한금속재료학회지
• /
• 제50권3호
• /
• pp.201-205
• /
• 2012

The effects of various manganese precursors for the low-temperature selective catalytic reduction (SCR) of $NO_x$ were investigated in terms of structural, morphological, and physico-chemical analyses. $MnO_x/TiO_2$ catalysts were prepared from three different precursors, manganese nitrate, manganese acetate(II), and manganese acetate(III), by the sol-gel method. The manganese acetate(III)-$MnO_x/TiO_2$ catalyst tended to suppress the phase transition from the anatase structure to the rutile or the brookite after calcination at $500^{\circ}C$ for 2 h. It also had a high specific surface area, which was caused by a smaller particle size and more uniform distribution than the others. The change of catalytic acid sites was confirmed by Raman and FT-IR spectroscopy and the manganese acetate(III)-$MnO_x/TiO_2$ had the strongest Lewis acid sites among them. The highest de-NOx efficiency and structural stability were achieved by using the manganese cetate(III) as a precursor, because of its high specific surface area, a large amount of anatase $TiO_2$, and the strong catalytic acidity.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2446-2450
• /
• 2013

Oxindole dimers have been used as intermediates in the synthesis of various cyclotryptamine alkaloids. An efficient direct synthesis of oxindole dimers has been carried out from 3-substituted oxindoles via an oxidative dimerization using manganese(III) acetate or copper acetate/silver acetate system.

• 공업화학
• /
• 제17권6호
• /
• pp.648-652
• /
• 2006

$MnO_{2}$는 배터리, 촉매 및 capacitor 등의 사용으로 인하여 이의 수요는 날로 증가하고 있다. 본 연구는 sacrificial core 법을 이용하여 $MnO_{2}$ 중공 미세구를 제조하였다. 이때 $MnO_{2}$ 나노입자는 manganese acetate의 가수분해 및 축합반응에 의해 제조되었다. 실험결과 물 0.2%, manganese acetate 0.65 mM, 촉매 0.02 mM를 실온에서 반응시켜 실험을 하였을 때 일정한 모양의 $MnO_{2}$ hollow microsphere를 제조할 수 있었다.

• 기술사
• /
• 제9권1호
• /
• pp.35-39
• /
• 1976

Possible methods of protection of non cellulosic fibers, particularly nylon filament yarn, from the damaging effects of light are discussed. Manganese acetate, cupricacetate, G1-06-196 and sodium phosphate are used as a light stabilizer for nylon filament yarn. The light stability of filament containing different weight of TiO$_2$ is increased as the following order: Bright>Semi-Dull>Full-Dull The protection effect against light according to the present of the light stabilizer in filament increased in the following order: Manganese acetate> Cupric acid> G1-06-196> Sodium phosphate Manganese acetate is shown to be the most effecting salt for protecting nylon against light. 15 ppm of the salt is shown to be effective enough for protecting nylon filament yarn against light.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.

• 공업화학
• /
• 제23권1호
• /
• pp.105-111
• /
• 2012

본 연구에서는 저온에서 질소산화물 저감효율이 뛰어난 것으로 알려진 망간전구체의 종류에 따른 영향을 고찰하기 위해 초임계수열법으로 합성한 세리아($CeO_2$)와 지르코니아($ZrO_2$)를 담체로 하여 저온 SCR 공정에서의 온도에 따른 활성변화를 비교 분석하였다. Manganese acetate (MA)와 Manganese nitrate (MN), 두 종류 망간전구체의 농도를 영향인자로 고려하여 촉매의 활성변화를 고찰하였다. 활성화된 시료의 특성은 $N_2$ adsorption-desorption, TGA, XRD, XPS를 통해 분석하였고 질소산화물 저감효율을 측정하기 위해 NOx 분석기를 이용하여 De-NOx 실험을 수행하였다. 제조방법에 따라 합성한 촉매의 질소산화물 저감 효율을 분석한 결과 Manganese acetate (MA)를 활성물질로 사용한 촉매가 Manganese nitrate (MN)을 사용한 촉매에 비해 전체적인 온도 영역에서 우수한 질소산화물 저감효율을 보였다. 이는 특성분석 결과를 통해 알 수 있듯이 Manganese acetate (MA)의 주성분인 $Mn_2O_3$가 Manganese nitrate (MN)의 주성분인 $MnO_2$에 비해 높은 산소 이동도를 갖고 담체와의 강한 상호작용을 형성하는 것에 기인한 것으로 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1455-1456
• /
• 2004

• 한국결정학회지
• /
• 제12권4호
• /
• pp.212-215
• /
• 2001

NaOAC·3H₂O 존재 하에서, manganese nitrate(Mn(NO₃)₂·H₂O )와 imidzole-4,5-dicarboxylic acid(IDCH₂)가 수열반응하여, 실험식 [Mn(IDC)(H₂O)]을 가지는 2차원 배위고분자 합성되었다. 화합물 1의 구조가 분광학적 방법(IR) 및 X-ray 회절법으로 규명되었다. 화합물의 1의 결정학적 자료: 사방정계 공간군 Pbca, a=7.257(5) Å b=13.687(5)Å, c=14.332(6)Å Z=8, R(wR₂)=0.0498(0.0999).

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1635-1639
• /
• 2002

A new solvent polymeric membrane sensor based on tetra(p-chlorophenyl)porphyrinato manganese (III) acetate is described which demonstrates excellent selectivity toward the triiodide ion. The electrode has a linear dynamic range between 1.0 ${\times}$ $10^{-2}$ M and 7.0 ${\times}$$10^{-6}$M with a Nernstian slope of $-59.6{\pm}1$ mV per decade and a detection limit of 5.0 ${\times}$$10^{-6}$M. The proposed sensor revealed good selectivities for triiodide over a wide variety of other anions and could be used in a pH range 2-9. The electrode can be used for at least two months without any considerable divergence in potential. It was applied as indicator electrode in potentiometric titration of the triiodide and As(III) ions.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1175-1179
• /
• 1998

The aerobic reaction of 2-(acetylpyridine)-S-methyldithiocarbazate (acpy-mdtcH) and 2-(acetylpyridine)-N-phenylthiosemicarbazate(acpy-phTscH) with manganese(Ⅱ) acetate affords Mn(acpy-mdtc)2 and Mn(acpyphTsc)2, respectively. The spectroscopic data and X-ray structure of Mn(acpy-mdtc)2 are reported. Crystal data for Mn(acpy-mdtc)2; C18H20N6S4Mn, mol wt 503.58, monoclinic crystal system(P21/c) a=12.240(5) Å, b= 10.918(l) Å, c=17.651(3) Å, β=105.93(2), and V=2268(l) Å3, Z=4, 5071 data collected with 0°< 2θ < 52.64°, 2995 data with I > 3σ(I), R= 0.046, Rw= 0.065. The ligands act as tridentate NNS donors. The two Mn-S distances are not equal, and respectively 2.512(2) Å and 2.541(2) Å. The average Mn-N (azomethine) length, 2.242(5) Å, is slightly shorter than the average Mn-N (pyridyl) length, 2.262(5) Å. The coordination environment about MN(Ⅱ) center deviates considerably from octahedral geometry. The manganese(Ⅱ)-manganese(Ⅰ) and manganese(Ⅰ)-manganese(0) reduction potentials of Mn(acpy-mdtc)2 are ∼-l.71 and ∼-l.98 V while those of Mn(acpy-phTsc)2 are ∼-l.87 and ∼-2.11 V vs. Ag/Ag+ in dimethyl sulfoxide, respectively.