• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.2
• /
• pp.100-105
• /
• 2017

Objectives: Localization of the mandibular canal (MC) and measurement of the height and width of the available alveolar bone at the proposed implant site in the posterior segment of the mandible using cone-beam computed tomography (CBCT) in patients with a single missing tooth. Materials and Methods: A cross-sectional study was performed where CBCT scans of the patients with a single missing tooth in the posterior segment of the mandible-premolar, I (1st) molar, and II (2nd) molar were used. The scans were assessed using OnDemand3D software (version 1.0; CyberMed Inc., Seoul, Korea) for localization of the MC asnd remaining alveolar bone both vertically (from the superior position of the MC to the crest of the alveolar ridge) and horizontally (buccolingual, 3 mm below the crest of the alveolar ridge). The findings were statistically analyzed using independent t-test. Results: A total of 120 mandibular sites (40 sites for each of the three missing premolar, I molar, and II molar) from 91 CBCT scans were analyzed. The average heights (from the alveolar crest to the superior margin of the MC) at the premolar, I molar, and II molar areas were $15.19{\pm}2.12mm$, $14.53{\pm}2.34mm$, and $14.21{\pm}2.23mm$, respectively. The average widths, measured 3 mm below the crest of the alveolar ridge, at the premolar, I molar, and II molar areas were $6.22{\pm}1.96mm$, $6.51{\pm}1.75mm$, and $7.60{\pm}2.08mm$, respectively. There was no statistically significant difference between males and females regarding the vertical and horizontal measurements of the alveolar ridges. Conclusion: In the study, the measurements were averaged separately for each of the single missing teeth (premolar, I molar, or II molar), giving more accurate information for dental implant placement.

• Journal of Periodontal and Implant Science
• /
• v.50 no.1
• /
• pp.28-37
• /
• 2020

Purpose: The aim of our study was to determine the prevalence and degree of lingual concavities in the first molar region of the mandible to reduce the risk of perforating the lingual cortical bone during dental implant insertion. Methods: A total of 163 suitable cross-sectional cone-beam computed tomography images of edentulous mandibular first molar regions were evaluated. The mandibular morphology was classified as a U-configuration (undercut), a P-configuration (parallel), or a C-configuration (convex), depending on the shape of the alveolar ridge. The characteristics of lingual concavities, including their depth, angle, vertical location, and additional parameters, were measured. Results: Lingual undercuts had a prevalence of 32.5% in the first molar region. The mean concavity angle was 63.34°±8.26°, and the mean linear concavity depth (LCD) was 3.03±0.99 mm. The mean vertical distances of point P from the alveolar crest (Vc) and from the inferior mandibular border were 9.39±3.39 and 16.25±2.44, respectively. Men displayed a larger vertical height from the alveolar crest to 2 mm coronal to the inferior alveolar nerve (Vcb) and a wider LCD than women (P<0.05). Negative correlations were found between age and buccolingual width at 2 mm apical to the alveolar crest, between age and Vcb, between age and Vc, and between age and LCD (P<0.05). Conclusions: The prevalence of lingual concavities was 32.5% in this study. Age and gender had statistically significant effects on the lingual morphology. The risk of lingual perforation was higher in young men than in the other groups analyzed.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.525-533
• /
• 2018

Objectives: This retrospective study evaluated the changes in the airway width after the orthognathic surgery associated with the skeletal Class III malocclusion. Methods: The lateral cephalograms of 30 adult patients were taken before and immediately after the operation, and after the orthodontic treatment. The angles and distances of them were measured and compared. Results: Before the surgery, the mean value of mandibular (S-B) setback was 9.66 mm, and moved by 1.56 mm anteriorly after the orthodontic treatment. The ANB increased by 5.42 degrees, since then it decreased by 0.68 degree. The hyoid bone (S-APH) moved by 5.05 mm posteriorly, but then moved by 2.26 mm anteriorly. The soft tissue width of laryngeal pharynx (apw2-ppw2) was narrowed by 1.04 mm, and decreased by additional 0.83 mm after the orthodontic treatment. Conclusions: As the mandible was moved back, the location of hyoid bone and laryngeal pharynx were moved backward.

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.73-82
• /
• 1983

The author studied on the dental arch widths and lengths and height of palates at 3 groups of dentition: mixed dentition, early permanent dentition, young adult, having normal occlusion and dentition. The models of the 336 maxillary and mandibular case, made from alginate-base hydrocolloid impressions were measured and analyzed statistically. The result as follows; 1. The upper intercanine width increased between the mixed dentition group and early permanent dentition group but there was no change in the young adult group in both sexes. The lower intercanine width increased between the mixed dentition group and early permanent dention group in the male. 2. The upper and lower 1st bimolar width increased slightly with age in the male but there was no change in the female. 3, The sex difference found in this study was one of absolute size, the female being slightly smaller than the male in the early permanent dentition group and young adult. 4. The arch length had no notable sexual differences and decreased between the mixed dentition group and early permanent dentition group. There was no change in the arch length in the young adult. 5. The height of palate increased gradually with age.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.217-225
• /
• 1988

This study was undertaken to examine relationship between tooth size and arch dimension in dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 51 pairs of dental casts (24 male and 27 female), exhibited remarkable dental crowding. A second group, consisting of 60 pairs of dental casts (30 male and 30 female), exhibited little or no crowding. Mean and standard deviation of the following parameters were used to compare two groups. individual and collective mesiodistal tooth diameters, buccal and lingual arch widths and arch area. The following results were obtained. 1. The crowed group revealed larger tooth size than noncrowded group. (p < 0.01) 2. The crowded group smaller maxillary dental arch dimension than noncrowded group except lingual arch width at canine region. (p < 0.01) 3. The corwded group revealed smaller mandibular dental arch dimension than noncrowded group except lingal arch width at second premalar region in the male and buccal arch width at canine, premolar region in the female. (p < 0.01) 4. The crowded group revealed smaller arch area than noncrowded group in the female (p < 0.01), but there was no significance in the male.

• Journal of Korean Dental Science
• /
• v.15 no.2
• /
• pp.132-140
• /
• 2022

Purpose: Dental diagnostic records derived from study models are a popular method of obtaining reliable and vital information. Conventional plaster models are the most common method, however, they are being gradually replaced by digital impressions as technology advances. Moreover, three-dimensional dental models are becoming increasingly common in dental offices, and various methods are available for obtaining them. This study aimed to evaluate the accuracy of the measurement of dental digital models by comparing them with conventional plaster and to determine their clinical validity. Materials and Methods: The study was conducted on 16 patients' maxillary and mandibular dental models. Tooth size (TS), intercanine width (ICW), intermolar width (IMW), and Bolton analysis were taken by using a digital caliper on a plaster model obtained from each patient, while intraoral scans were manually measured using two digital analysis software. A one-way analysis of variance test was used to compare the dental measurements of the three methods. Result: No significant differences were reported between the TS, the ICW and IMW, and the Bolton analysis through the conventional and two digital groups. Conclusion: Measurements of TS, arch width, and Bolton analysis produced from digital models have shown acceptable clinical validity. No significant differences were observed between the three dental measurement techniques.

• The Journal of the Korean dental association
• /
• v.52 no.10
• /
• pp.623-632
• /
• 2014

The facial asymmetries include maxillary, mandibular, and chin asymmetries, although the most common deformity is primarily in the mandible. Common causes of this type of asymmetry can include asymmetric growth of the condyle or the mandible. In these patients, the location of the Me would be deviated to the shorter side because of the asymmetric growth of the mandible, and, commonly, the maxillary occlusal plane would be tilted toward the deviated side because the maxilla likely grows asymmetrically according to the pattern of asymmetric mandibular growth. Three-dimensional CT images are ideal for evaluating the size and location of anatomic structures, and such reconstructed images allow the use of software that can show anatomic structures from numerous angles, allowing actual measurements of distances and angles without problems of magnification, distortion, or superimposition caused by 2-dimensional imaging. In the present study using 3D-CT imaging, the 8 parameters, including measurements of the upper midline deviation, maxillary canting in the canine and first molar regions, width of the upper arch, width of the mandible at the Go, vertical length of the ramus, inclination of the ramus, and deviation of the Me were easily measured. The dentition should be orthodontically decompensated and dental midline should ensure incisor midlines positioned in the midline of each jaw before surgical correction. Surgical correction could be considered such as canting or yawing correction in the frontal or horizontal aspect, respectively.

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.120-128
• /
• 2020

Objective: The aims of the present study were to evaluate the changes in the maximum lip-closing force (MLF) after orthodontic treatment with or without premolar extractions and verify the correlation of these changes with dentoskeletal changes. Methods: In total, 17 women who underwent nonextraction orthodontic treatment and 15 women who underwent orthodontic treatment with extraction of all four first premolars were included in this retrospective study. For all patients, lateral cephalograms and dental models were measured before (T0) and after (T1) treatment. In addition, MLF was measured at both time points using the Lip De Cum LDC-110R^® device. Statistical analyses were performed to evaluate changes in clinical variables and MLF and their correlations. Results: Both groups showed similar skeletal patterns, although the extraction group showed greater proclination of the maxillary and mandibular incisors and lip protrusion compared to the nonextraction group at T0. MLF at T0 was comparable between the two groups. The reduction in the arch width and depth and incisor retroclination from T0 to T1 were more pronounced in the extraction group than in the nonextraction group. MLF in the extraction group significantly increased during the treatment period, and this increase was significantly greater than that in the nonextraction group. The increase in MLF was found to be correlated with the increase in the interincisal angle and decrease in the intermolar width, arch depth, and incisor-mandibular plane angle. Conclusions: This study suggests that MLF increases to a greater extent during extraction orthodontic treatment than during nonextraction orthodontic treatment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.423-427
• /
• 2001

Objective: This study was prepared to figure out a certain dimension and morphology of the condyle at the central, medial and lateral aspects on MR images of asymptomatic volunteers, which could be comparable with those of the TMD patients' condyle. Materials: Sixty TMJs from 30 asymptomatic volunteers(15 male, 15 female) who had no clinical symptoms and no disc displacement on sagital and coronal view of MRI were served as normal. Method: MR images were taken from the asymptomatic volunteers and the dimension of the anteroposterior length, mediolateral width, height, convexities were measured through the images on the sagittal and coronal sections of mandibular condyle. Then, these data were collected and analyzed. Result: The mean value of anteroposterior length was $8.00{\pm}1.21mm$ at central section and mediolateral length was $21.40{\pm}2.32mm$ on coronal view. The anterior condylar length at medial side was the shortest and the convexity of anterior slop at the lateral side was proved to be the flattest among 3 sections. There were little dimensional and morphological differences at sagittal sections, but the mediolateral width of condyle at coronal section was significantly different between male and female. Conclusion: In sagittal sections, the anterior condyle length was shortest at medial side and the convexity of anterior slop was flattest at lateral side, and there were little dimensional and morphologic differences between male and female. In coronal section, male's condyle was more wider and flatter than female's.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.311-316
• /
• 2006

A scissors bite in the posterior teeth occurs when the upper teeth are positioned totally or unilaterally buccal to the lower teeth in centric occlusion. This malocclusion can result from either excessive width of maxilla, deficient width mandible, or combination of both. The malocclusion can lead to hindered growth of jaws or to asymmetry between the jaws, Besides, the severe lingual inclination of the mandibular posterior teeth prevents adequate mastication. Thus, the scissors bite is in need of immediate interceptive orthodontic intervention. The common treatments of the scissors bite is to expand the mandibular arch: fixed or removable appliances. In our clinic, we made a success in treatment of the scissors bite using the Schwarz appliance. We treated the scissors bite using the lower Schwarz appliance for a mean observation period of 21 months. The subjects were 2 boys, aged 4 years.