• The korean journal of orthodontics
• /
• v.43 no.6
• /
• pp.288-293
• /
• 2013

Objective: This study was aimed at comparing the mandibular arch forms of Korean and Vietnamese patients by using facial axis (FA) points on three-dimensional (3D) models. Methods: Mandibular casts of 68 Korean (Class I malocclusion, 30; Class II malocclusion, 38) and 78 Vietnamese (Class I malocclusion, 41; Class II malocclusion, 37) patients were scanned in their occluded positions and grouped according to arch form (tapered, ovoid, and square). The FA point of each tooth was digitized on the 3D mandibular models. The measurements and frequency distributions of the arch forms were compared between the ethnic groups. Results: The Vietnamese patients had significantly greater intercanine depth and intercanine and intermolar width-to-depth ratios than the Korean patients (p < 0.05). The frequency distributions of the arch forms were also significantly different (p = 0.038), but no sexual dimorphism was found. Conclusions: Vietnamese people tend to have deeper and wider arches than Korean people. The three arch forms are evenly distributed in Korean people, but Vietnamese people frequently have square arches. Clinicians should identify the correct arch form of an ethnic group before initiating orthodontic treatment.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.117-127
• /
• 2002

The purpose of this study was to compare the arch width of the hyperdivergent group with that of the neutral group in Class III malocclusion based on the vertical patterns and to compare the arch width of Class III neutral group With that of normal occlusion group based on sagittal patterns. The subjects consisted of 118 pairs of studty casts, divided into three groups , 37 Class III hyperdivergent group(18 males and 19 females, SN-Mn plane angle>39.5$^{\circ}$), 40 Class III neutral group(20 males and 20 females, SN-Mn plane angle : 32 ${\pm}$ 2.5$^{\circ}$) and 41 Class I normal occlusion group(20 males and 21 females). The intercanine, interpremolar, and intermolar width of the maxillary and mandibular study casts were measured, then the ratios of dental width to basal width and mandibular width to maxillary width were obtained. Basal arch width and dental arch width were measured to obtain the pure basal arch relation in transverse plane as ruled out the transverse dental compensation. The results were as follows 1. There were no significant differences in any ratios between Class III hyperdivergent group and Class III neutral group as different vertical pattern. 2. As the ratios of dental arch width to basal arch width between normal occlusion group and Class III neutral group were compared, the maxillary teeth flared buccally to the basal bone, and the mandibular teeth tilted lingually to the basal bone in Class III neutral group. 3. The ratios of mandibular arch width to maxillary arch width in basal arch level were significantly different in all regions. Maxillary basal arch width of Class III neutral group was narrower than that of normal occlusion group. 4. The ratios of mandibular arch width to maxillary arch width in teeth level were not significantly different between normal occlusion group and Class III neutral group. In spite of discrepancies of maxillary and mandibular basal arch width, the dental arch width of Class III malocclusion group compensated very well. At the presurgical orthodontic treatment in clinic, it would not be desirable to decompensate for compensated dental arch width too much, for obtaining an appropriate arch compatibility and good results for orthognathic surgery.

• The korean journal of orthodontics
• /
• v.48 no.3
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.481-487
• /
• 2004

The purpose of this study was to clarify morphologic characteristics between mandibular clinical arch forms in Koreans with normal occlusions. The study included data from 102 Koreans. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The dental arches were classified into ovoid, square and tapered forms. The frequency distributions of the three mandibular arch form classifications were determined and compared between male and female subjects. No significant differences in arch form size were found between the sexes. However, there were a few differences in molar width. It was useful to classify mandibular clinical arch forms present in normal occlusion samples into ovoid, square and tapered categories. The frequency of the ovoid form was the highest, and that of the square form was the second highest. The tapered arch form was found in less than 10 percent of subjects. No significant differences in their frequency distributions and dimensions were shown between males and females.

• The korean journal of orthodontics
• /
• v.38 no.4
• /
• pp.283-298
• /
• 2008

Objective: The purpose of this study was to investigate changes in the mandibular dental arch from presurgical orthodontic treatment and orthognathic surgery, and to evaluate the relationships between the pretreatment records and changes of mandibular dental arch in skeletal Class III malocclusion individuals. Methods: Lateral cephalometric radiographs and mandibular study models of 31 adults with skeletal class III malocclusion were taken and measured. All measurements were evaluated statistically by ANOVA, Scheffe's Post Hoc, and paired t-test, and correlation coefficients were evaluated. Results: No significant difference in Mn-LMMC, Mn-LIE, Mn-MnOcc was detected between pretreatment and presurgical groups. Statistically significant but low correlations were demonstrated between the initial arch length discrepancy (ALD) and change in ICW, IPW1 (r = 0.492, 0.615) and change in arch length (r = 0.641). No association was seen between the initial depth of curve of Spee and change in mandibular incisor angle and arch width or arch length. Regression analysis showed that the amount of change for arch length and IPW1 could be explained by 64.0% and 75.8% of the pretreatment variables respectively. Conclusions: This study suggests that orthognathic surgery results can be predictable by measuring the pretreatment records.

• The korean journal of orthodontics
• /
• v.11 no.2
• /
• pp.143-150
• /
• 1981

Casts of 180 Korean male and female with normal occulsion of early permanent dentition (from dental age of Hellman III C, to IV A) were studied to measure the mesiodistal crown diameters and to calculate the coefficients of correlation between the teeth. From the study, the following conclusions were made: 1. Mesiodistal dimension of maxillary central incisors, canines, first molars and mandibular canines, first premolars, second premolars and first molars of male are larger than that of female. 2. Korean teeth are roughly intermediate between those of American Caucasian and those of American Negro. 3. In both sexes, the relation between the first and second premolars appeared highly correlated not only in the maxillary arch but also in the mandibular arch, and the relation between the central incisor and lateral incisor appeared highly correlated in the mandibular arch. 4. The relation between the maxillary and mandibular first premolars appeared highly correlated in both sex, and the relation between the maxillary canine and mandibular canine in male as well as between the maxillary central incisor and mandibular central incisor in female appeared highly correlated.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.535-546
• /
• 1996

The purpose of this study was to classify mandibular dental arch forms based on Raberin's method, and to compare Raberin's arch forms with that of the Korean's, and to designate arch form of bracket level according to distance between cusp tip and buccal surface of bracket level. The sample consisted of 159 mandibular dental casts showing normal occlusion which was taken from 62 males and 97 females of the Korean, aging from 13 to 25 years. The model was taken by X-ray. The landmarks were cusp points which expressed the mandibular dental arch line of cusp tips and buccal points which were measured from cusp tips to buccal surfaces of bracket level. The landmarks on the film were digitized, and measurements and statistics were performed. The results were as follows; 1. The models were classified as type 1, type 2, type 3, type 4 and type 5 by the author, and polynomial functions of the six degree and R-square values were calculated using statistical method, and each calculated equations explained each group with the least R-square value of 0.97, and each arch forms' were plotted. 2. The distribution of type 1 was $17.6\%$, type 2 $20.8\%$, type 3 $20.8\%$, type 4 $16.3\%$ and type 5 $24.5\%$. 3. The Korean arch form was characterized by larger width, smaller height compared to the French arch form. 4. The designated arch form of bracket level, viz the distance between cusp point and buccal point was calculated. The distance between cusp point and buccal point of incisor was 1mm, canine 1.9mm, first premolar 2.5mm, second premolar 2.6mm, first molar 2.7mm and second molar 2.7mm.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.55-65
• /
• 2024

This study aimed to assess the accuracy of tooth widths, intermolar widths, and arch lengths acquired through two intraoral scanners, including iTero Element Plus Series (Align Technology, Santa Clara, CA, USA) and Trios 4 (3Shape, Copenhagen, Denmark), specifically on mixed dentition. A total of 30 subjects were divided into 2 groups, each undergoing both alginate impressions and intraoral scanning using either the iTero or Trios scanner. The plaster models were measured with a caliper, while the digital models were measured virtually. In the iTero group, all tooth width measurements exhibited differences compared to the plaster values, except for maxillary left lateral incisors (p = 0.179), mandibular right (p = 0.285), and left (p = 0.073) central incisors. The Trios group did not display significant differences in any of the tooth width measurements. Intermolar width comparisons for both groups indicated differences, except for mandibular primary canine to primary canine values (p = 0.426) in the iTero group. Regarding arch length, the mandibular anterior, maxillary right, and left arch lengths in the iTero group demonstrated larger caliper values than those of iTero. Conversely, in the Trios group, all parameters showed smaller caliper values, especially in upper anterior, maxillary right, mandibular right, and mandibular left arch lengths with significance (p = 0.027, 0.007, 0.003, and 0.047, respectively). Despite the differences between the two groups, digital models might be clinically suitable alternatives for plaster models. Pediatric dentists should carefully assess these differences, as a comprehensive evaluation would result in precise orthodontic treatment planning and favorable outcomes for young patients with mixed dentition.

• The korean journal of orthodontics
• /
• v.41 no.3
• /
• pp.200-210
• /
• 2011

Objective: This study aimed at evaluating the changes in mandibular arch widths and buccolingual inclinations of mandibular posterior teeth after rapid maxillary expansion (RME). Methods: Baseline and post-expansion cone-beam computed tomographic (CBCT) images of patients who initially had bilateral posterior cross-bite and underwent RME with a banded-type expander were assessed in this study. The patients included 9 boys (mean age: $13.97{\pm}1.17$ years) and 11 girls (mean age: $13.53{\pm}2.12$ years). Images obtained 6 months after retention were available for 10 of these patients. Eighteen angular and 43 linear measurements were performed for the maxilla and mandible. The measurements were performed on frontally clipped images at the following time points; before expansion (T1), after expansion (T2), and after retention (T3). Statistical significance was assessed with paired sample $t$-test at $p$ < 0.05. Results: T1-T2 comparisons showed statistically significant post-RME increases for all measurements; similarly, T2-T1 and T3-T1 comparisons showed statistically significant changes. The maxillary linear and angular measurements showed decreases after expansion, and mandibular linear and angular measurements increased after retention. Conclusion: All mandibular arch widths increased and mandibular posterior teeth were uprighted after RME procedure.