• The korean journal of orthodontics
• /
• v.46 no.4
• /
• pp.253-265
• /
• 2016

In the present report, we describe the successful use of miniscrews to achieve vertical control in combination with the conventional sliding MBT$^{TM}$ straight-wire technique for the treatment of a 26-year-old Chinese woman with a very high mandibular plane angle, deep overbite, retrognathic mandible with backward rotation, prognathic maxilla, and gummy smile. The patient exhibited skeletal Class II malocclusion. Orthodontic miniscrews were placed in the maxillary anterior and posterior segments to provide rigid anchorage and vertical control through intrusion of the incisors and molars. Intrusion and torque control of the maxillary incisors relieved the deep overbite and corrected the gummy smile, while intrusion of the maxillary molars aided in counterclockwise rotation of the mandibular plane, which consequently resulted in an improved facial profile. After 3.5 years of retention, we observed a stable, well-aligned dentition with ideal intercuspation and more harmonious facial contours. Thus, we were able to achieve a satisfactory occlusion, a significantly improved facial profile, and an attractive smile for this patient. The findings from this case suggest that nonsurgical correction using miniscrew anchorage is an effective approach for camouflage treatment of high-angle cases with skeletal Class II malocclusion.

• Archives of Plastic Surgery
• /
• v.43 no.1
• /
• pp.32-37
• /
• 2016

Background We conducted this study to analyze the values of the key cephalometric angular measurements of the mandible using 3-dimensional (3D) computed tomography scans. Methods In the 106 enrolled patients, a 3D cephalometric analysis was performed to measure the angular variables of the mandible. These values were compared between the two sides and between the two sexes. Results The frontal measurements revealed that the mandibular body curve angle was larger on the left (Lt) side (right [Rt], $141.24{\pm}7.54$; Lt, $142.68{\pm}6.94$; P=0.002) and the gonial angle was larger on the right side (Rt, $134.37{\pm}8.44$; Lt, $131.54{\pm}7.14$; P<0.001). The sagittal measurements showed that the gonial angle was larger on the right side (Rt, $134.37{\pm}8.44$; Lt, $131.54{\pm}7.14$; P>0.05). Further, the transverse measurements revealed that the mandibular body curve angle was larger on the right side (Rt, $140.28{\pm}7.05$; Lt, $137.56{\pm}6.23$; P<0.001). Conclusions These results provide an average of the mandibular angular measurements for the Korean population, establishing a standard for determining surgical patient groups and outcome evaluations in the field of mandible contour surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.5
• /
• pp.265-271
• /
• 2003

Skeletal relapse is known as a complication following orthognathic surgery of mandibular prognathism and occurring during intermaxillary fixation period. Therefore relapse of teeth and skeleton during intermaxillary fixation period is considered as a important problem of orthognathic surgery. In this study, cephalolateral radiographs taken at pre-operation, immediate post-operation and after release of intermaxillary fixation were measured for evaluation of dental and skeletal relapse in 30 cases. The cases were classified as screw fixation group and plate fixation group, then we compared magnitude of dental and skeletal changes of each group. The results were as follows 1. The $\underline{1}$ SN angle increased at immediate post-operation with a mean value of $0.12^{\circ}$ and at intermaxillary fixation period with a mean value of $0.43^{\circ}$ (p>0.05). 2. The $\overline{1}$ MP angle decreased with a mean value of $0.14^{\circ} at immediate post-operation and with a mean value of $1.28^{\circ} during intermaxillary fixation period but there were not significant difference(p>0.05). 3. There were not significant difference in magnitude of dental position changes between screw fixation group and plate fixation group(p>0.05). 4. Gonial angle increased with a mean value of $0.62^{\circ} during intermaxillary fixation period. Each group showed changes of gonial angle during intermaxillary fixation period but there were not significant difference(p>0.05).

• The Journal of Advanced Prosthodontics
• /
• v.14 no.3
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.633-644
• /
• 1993

There has been so much controversies about the position of upper and lower jaws, and their first permanent molars in normal occlusion and Angle's class $I{\cdot}II{\cdot}III$ malocclusions. So, the purpose of this study is to compare the position of upper and lower jaws, and their first molars in normal occlusion and Angle's class $I{\cdot}II{\cdot}III$ malocclusions by lateral cephalometric analysis. The sample consisted of one hundred and twenty girls(thirty in each group) who had completed growth. The findings of this study were as follows : 1. In class I malocclusion, both maxilla and mandible were slightly posterior position than normal occlusion, but they showed harmonious relationship. 2. In class II malocclusion, the mandible was greatly retruded, and the maxilla was also slightly retruded to the cranial base as compared with normal occlusion. 3. In class III malocclusion, the maxilla was significantly retruded to the cranial base, but no significant difference was found in mandibular position as compared with normal occlusion. 4. The maxillary first molar was located at posterior position in class II malocclusion, and anterior position in class III malocclusion to the cranium, so that the rotation of mandible was influenced by that. 5. The mandibular first molar showed constant relationship to the mandible in all four groups, but different position to the cranial base in direct proportion to the mandibular position. 6. On the treatment planning of class III malocclusion, it seems to be better to promote the mandibular horizontal growth by inhibiting the vertical growth of maxillary molar area, and on the treatment planning of class III malocclusion, it seems to be better to promote the antero-inferior growth of maxilla mi to promote the mandibular vertical growth by inducing the vertical growth of maxillary molar area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.5
• /
• pp.372-382
• /
• 2002

As the most of dentofacial deformity patients indicated to orthognathic surgery have strong desire for esthetic improvement as well as functional improvement, ideal esthetic evaluation should be made at surgical prediction. Lateral cephalographs has been commonly used for surgical prediction, however, remarkable discrepancy between esthetic viewpoint by simple looking and analysis on lateral cephalographs often found on evaluation of sagittal position of the upper and lower jaws especially in cases of mandibular prognathism of Koreans. In these cases, we have been employed Esthetic NaP(ENaP)-line for corrective evaluation and ideal surgical prediction on lateral cephalographs, but the efficacy of ENaP-line has not been evaluated. This is a study on efficacy of ENaP-line for orthognathic surgery of Korean mandibular prognathism. 170 Korean patients who had been diagnosed as mandibular prognathism and planned for orthognathic surgery at Department of Oral and Maxillofacial Surgery, College of Dentistry, Yonsei University during last 10 years are studied. The obtained results are as followings; among 170 patients of mandibular prognathism, 132 patients(77.6%) had not discrepancy in evaluation of sagittal position of the maxilla between cephalometric and esthetic evaluation(they are classified as Group I), however, 38 patients(22.4%) had definite discrepancy(they are classified as Group II). ENaP-line was employed in all cephalometric analysis of Group II. The proportions of male and female were similar in both Groups. Sixteen vertical reference lines perpendicular to 16 horizontal reference lines were obtained as followings; Each of the representative degree of ${\angle}SN/AFH$, ${\angle}SN/CFH$ and ${\angle}AFH/CFH$ obtained at Group I was applied to SN plane, AFH plane and CFH plane of Group II each other, and so 16 horizontal reference lines could be obtained individually according to each of the applied degree to each plane. And then their reliability to coincide with ENaP-line of Group II was evaluated. A vertical reference line perpendicular to a horizontal line made by application of the representative degree of ${\angle}$AFH/CFH in Group I to AFH line in Group II had the most highest coincidence with ENaP-line of Group II, however, its agreement was 42% in male and 47% in female. From this results, the rest of them should be determined their corrective jaw position definitely depend on

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.63-72
• /
• 1987

This is to investigate the difference between craniofacial correlation of Angle's class III malocclusion and that of normal occlusion. For this investigation, 28 adult males and famales, who have class III malocclusion, and 35 adult males and 46 adult famals., who have normal occlusion were selected to measure actual dimension of cranial base and to investigate ratio of various parts of maxillofacial skeleton against cranial base. Class III malocclusion were, also , classified based on SNA and SNB angle in normal range. Results were as follows. 1. In class III malocclusion, actual dimension of cranial base were appeared to be less than normal occlusion in both sex. 2. In class III malocclusion, values were less than normal occlusion in BN/ptm-A in both sex, but had no significance between two. 3. In class III malocclusion, ramal inclination, mandible inclination, BN/Go-Pog, lower genial angle were appeared to be greater. Thus, characteristic mandibular protrusive appearance of class III malocclusion was due to relative ratio and morphologic characteristic of mandibular body dimension against cranial base. 4. In class III malocclusion, upper incisors were labially tilted and lower incisors were lingually tilted compared to normal occlusion. 5. In typing of class III malocclusion, the most common type was found to be one which maxillas were in normal range, while mandibles were in protrusive tendency.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.47-54
• /
• 1987

This study was designed to compare extreme variations in facial growth in order to examine the relationships between the glenoid fossa position and skeletal malocclusions. It was hypothesized that patients with large mandibular plane-sella nasion angles would have a more superior fossa position than patients with small mandibular plane-sella nasion angles. It was also hypothesized that patients with large ANB angles would have a more posterior fossa position than patients with small ANB angle. For this study, the data from lateral roentgenocephaloprams of 72 Females and 72 males aged from 10 to 18 years were used. The results were as follows 1. In the case of large ANB angle, glenoid fossa position was relatively posterior than that of small ANB angle in Female, but it was not significant in male. 2. In the case of large APDI, glenoid fossa position was relatively anterior in female, but it was not significant in male. 3. In the case of large SN-Go Gn angle, glenoid fossa position was relatively superior in both male and female. 4. In the case of large ODI, glenoid fossa position was relatively inferior in both male and female.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.4
• /
• pp.229-236
• /
• 2009

Objectives : The purpose of this study is to report one case of spinal scoliosis patient with neglected congenital muscular torticollis treated by chuna manual therapy. Methods : The patient had been treated with chuna manual therapy. Full spine anteroposterior X-ray was taken to measure cobb's angle and cervico-mandibular angle before and after the period of treatment. Results : After treatment, the cobb's angle has been improved by $12^{\circ}$($31^{\circ}$ to $19^{\circ}$) at thoracic level, by $7^{\circ}$($17^{\circ}$ to $10^{\circ}$) at lumbar level. The cervico-mandibular angle has been improved by $5^{\circ}$($14^{\circ}$ to $9^{\circ}$). Conclusions : Chuna manual therapy was effective for a scoliosis patient with neglected congenital muscular therapy.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.175-188
• /
• 1988

The purposes of the present study were to describe the vortical and anteroposterior facial dysplasia, and to identify morphologic differences associated with various facial patterns. Anteroposterior dysplasia was classified by traditional Angle's malocclusion classification and according to vertical relationships based on the SN-MP angle, facial pattern was subclassified to 3 vertical groups in each malocclusion group. Each vertical group composed of 20 samples and total 180 samples aged from 9 to 14 years. The results were as follows; 1. The skeletal differences that lead to disportionate lower facial height in vortical and anteroposterior facial dysplasia were closely related to mandibular morphology. 2. Hyperdivergent group, compared with hypodivergent group, demonstrated decrease of SNA and SNB and linguoversion of maxillary and mandibular central incisors in all malocclusion groups. 3. Irrespective of rotation of the jaws, Wits appraisal was a useful measurement in evaluation of relative anteroposterior relationship of maxilla and mandible. 4. As SN-MP angle increased, anterior facial height, especially lower anterior facial height, demonstrated significant increase and intermaxillary space also tended to increase. 5. The correlation coefficients of SN-MP angle and PTFH/ATFH demonstrated the highest value in all malocclusion groups.