• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.4
• /
• pp.521-526
• /
• 2012

The performance of arrow from a manufacturing process depends on arrow's trajectory(archer's paradox) and intensity of an impact points. Especially, when conducting a shooting experiment over and over in the same experiment condition, the intensity of impact point is an objective standard to judge the performance of the arrow. However, the analysis method for the impact point is not enough, a previous research of the arrow's performance has been focused on a skill to optimize a manufacturing variables(feathers of an arrow, barb of an arrow, arrow's shaft, weight, external diameter, spine). In this paper, We propose measurement system of arrow's impact point with Mamdani fuzzy inference system and similarity of polygon for automation of impact point's measurement. Measuring the impact point data of the arrow moving with a high speed(approximately 275km/h) by using line laser and photo diode array, then the measured data are mapped to arrow's impact point with fuzzy inference and similarity of polygon.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.505-513
• /
• 2009

Z. Cao had proposed NFRM(new fuzzy reasoning method) which infers in detail using relation matrix. In spite of the small inference rules, it shows good performance than mamdani's fuzzy inference method. But the most of fuzzy systems are difficult to make fuzzy inference rules in the case of MIMO system. The past days, We had proposed the MIMO fuzzy inference which had extended a Z. Cao's fuzzy inference to handle MIMO system. But many times and effort needed to determine the relation matrix elements of MIMO fuzzy inference by heuristic and trial and error method in order to improve inference performances. In this paper, we propose a MIMO fuzzy inference method with the learning ability witch is used a gradient descent method in order to improve the performances. Through the computer simulation studies for the inverse kinematics problem of 2-axis robot, we show that proposed inference method using a gradient descent method has good performances.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.175-178
• /
• 2008

Z. Cao had proposed NFRM(new fuzzy reasoning method) which infers in detail using relation matrix. In spite of the small inference rules, it shows good performance than mamdani's fuzzy inference method. But the most of fuzzy systems are difficult to make fuzzy inference rules in the case of MIMO system. The past days, We had proposed the MIMO fuzzy inference which had extended a Z. Cao's fuzzy inference to handle MIMO system. But many times and effort needed to determine the relation matrix elements of MIMO fuzzy inference by heuristic and trial and error method in order to improve inference performances. In this paper, we propose a MIMO fuzzy inference method with the learning ability witch is used a gradient descent method in order to improve the performances. Through the computer simulation studies for the inverse kinematics problem of 2-axis robot, we show that proposed inference method using a gradient descent method has good performances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1591-1598
• /
• 2008

Z. Cao had proposed NFRM(new fuzzy reasoning method) which infers in detail using relation matrix. In spite of the small inference rules, it shows good performance than mamdani's fuzzy inference method. In this paper, we propose Z. Cao's fuzzy inference method with learning ability which is used a gradient descent method in order to improve the performances. It is hard to determine the relation matrix elements by trial and error method. Because this method is needed many hours and effort. Simulation results are applied nonlinear systems show that the proposed inference method using a gradient descent method has good performances.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.7
• /
• pp.1791-1800
• /
• 1998

본 논문에서는 Mamdani 방법과 Koczy 방법의 퍼지 추론 알고리즘에 대햇 병렬머신에 적합한 병렬 퍼지 추론 방법을 제안하고, 효율적인 병렬 퍼지 아키텍처를 설계한다. 제안된 아키텍처는 비교적 높은 성능을 갖고, 확장이 용이한 구조로서, 여러개의 FPE(Fuzzy Processing Element), CP(Control Processor), 메모리 모듈, 상호연결망 및 Min 회로로 구성되어 있다. 이러한 구조의 특징은 iqjsWo의 FPE는 I번째의 전건부 및 I번째의 후건부의 처리만을 수행하기 때문에 전건부, 변수들의 처리는 각각 병렬도 수행되고, 후건부의 처리도 또한 각각 병렬로 수행된다. 따라서 프로세서의 활용도가 높아지며, 전건부와 후건부의 변수, 퍼지규칙의수에 관계없이 쉽게 구성할 수 있다. 이러한 구조는 실시간에 고속추론을 요하는 시스템 또는 전건부와 후건부의 변수가 많은 대규모 전문가 시스템에 사용되어 질 수 있으며, MISO(Multiple-input, Single-output) 시스템보다 MIMO(Multiple-input, Multiple-output) 시스템에 특히 적합하다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2012

In this paper, we present an obstacle avoidance control algorithm for mobile robots based on SFLC (single-input fuzzy logic controller) with an efficient fuzzy logic look-up table to replace the traditional complicated operation. This method achieves better performance than traditional methods in terms of efficiency. The output of a SFLC leads the robot to the target automatically although many obstacles on the path. Our experiments show that the robot has good performance in the view of path tracking and other efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.738-745
• /
• 2001

In this paper, when the moving object move to the three-dimentional space, the tracking system track the moving object using the fuzzy reasoning. The joint angle el of the manipulator rotate from $0^{\circ}\; to\; 360^{\circ}$ , and the joint angle $\theta_2$rotate from$0^{\circ}\; to\; 360^{\circ}$. The fuzzy singleton is used for fuzzification and the control rule is twenty five and the fuzzy inference method is simplified Mamdani's reasoning and the defuzzification is the SCOG(Simplified Center Of Gravity) of the fuzzy controller To measure of the performance of the designed system, the fuzzy controller is compared with the CTM(Computed Torque Method) controller at the same condition. when the disturbance torque is ON, the both of CTM and fuzzy controller tracked object without error, However, the disturbance torque changed 0.4N, the CTM controller is 10 times greater than fuzzy controller at the sum of absolute error difference. The designed system is showed it's robustness against with disturbance.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.42-51
• /
• 2004

This paper presents a study on the analysis of fire detection system using fuzzy logic with input variables of temperature and smoke density. The input variables for the fuzzy logic algorithm are measured by fire experiment of small scale with temperature detector and smoke detector. The antecedent part of fuzzy rules consists of temperature and smoke density, and the consequent part consists of fire possibility. Also the triangular fuzzy membership function is chosen for input variables and fuzzy rules to simplify computation. In order to calculate fuzzy values of such fuzzy system, a computer program is developed with Matlab based on graphics user interface. The experiment was conducted with paper and ethanol to simulate flaming fire and with plastic and sawdust to model smoldering fire. The results showed that the fire detection system presented here was able to diagnose fire very precisely. With the help of algorithms using fuzzy logic we could distinguish whether fire or not.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.6
• /
• pp.842-848
• /
• 2008

This paper deal with uncertainty problem by using Type-2 fuzzy logic set for nonlinear system modeling. We design Type-2 fuzzy logic system in which the antecedent and the consequent part of rules are given as Type-2 fuzzy set and also analyze the performance of the ensuing nonlinear model with uncertainty. Here, the apexes of the antecedent membership functions of rules are decided by C-means clustering algorithm and the apexes of the consequent membership functions of rules are learned by using back-propagation based on gradient decent method. Also, the parameters related to the fuzzy model are optimized by means of particle swarm optimization. The proposed model is demonstrated with the aid of two representative numerical examples, such as mathematical synthetic data set and Mackey-Glass time series data set and also we discuss the approximation as well as generalization abilities for the model.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.64-70
• /
• 2014

In this paper, we propose a method that gives motion command to a mobile robot to recognize human being's hand gesture. Former way of the robot-controlling system with the movement of hand used several kinds of pre-arranged gesture, therefore the ordering motion was unnatural. Also it forced people to study the pre-arranged gesture, making it more inconvenient. To solve this problem, there are many researches going on trying to figure out another way to make the machine to recognize the movement of the hand. In this paper, we used third-dimensional camera to obtain the color and depth data, which can be used to search the human hand and recognize its movement based on it. We used HMM method to make the proposed system to perceive the movement, then the observed data transfers to the robot making it to move at the direction where we want it to be.