• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.16-25
• /
• 2005

In this research, we investigated hydrolysis of the ester crosslinking on cotton fabric treated with polymer of maleic acid(PMA), citric acid(CA) and combination of polymer of maleic acid and citric acid using Fourier transform infrared spectroscophy. The rate of hydrolysis of the ester crosslinkage increased with pH regardless of the type of polycarboxylic acid used and even after hydrolysis for 256 hour in pH 13_4 solution, the treated fabric retained $10-20\%$ ester crosslinkage. The durability to alkaline hydrolysis of the ester crosslinkage formed by CA was lower than that of by PMA and combination of poly(maleic acid) and citric acid indicating that the ester formed by CA on the cotton fabric is more susceptible to hydrolysis than that formed by PMA and combination of PMA and CA. The total amount of ester and polycarboxylic acid molecules removed from fabric increased with increasing hydrolysis time but the rate of hydrolysis of ester linkage were higher than that of removal of polycarboxylic acid molecule from the fabric. The characteristic of hydrolysis of fabric treated with combination of PMA and CA was related with the mixing ratio of PMA and CA in treating fabric.

• 멤브레인
• /
• 제14권1호
• /
• pp.44-52
• /
• 2004

본 연구는 직접메탄을 연료전지(Direct Methanol Fuel Cell)에 적용가능한 양이온교환막 개발에 관한 것으로 poly(vinyl alcohol) (PVA)에 가교제로 poly(acrylic acid-co-maleic acid) (PAM)와 hydroquinonesulfonic acid (HQSA)를 이용하여 가교제의 함량을 변화시키면서 막을 제조하였다. 제조한 막은 가교제의 함량 변화에 따라 메탄을 투과도, 이온전도도를 측정하였으며 기본적인 이온교환막의 특성인 함수율, 이온교환용량 그리고 고정이온농도 등을 측정하였다. PAM 함량이 증가함에 따라 메탄을 투과도와 이온전도도 및 함수율이 조금 증가하는 추세를 보이다 9 wt%부터 감소하는 경향을 보였는데 이는 PAM의 친수성기보다는 가교효과의 영향이라 사료되며 HQSA 함량을 변화시켰을 때는 이온전도도, 함수율 그리고 이온교환용량이 전반적으로 증가하였는데 그 증가폭은 미비하였다.

• KSBB Journal
• /
• 제19권1호
• /
• pp.33-37
• /
• 2004

최근 들어 succinic acid는 기존의 용도 이외에도 생분해성 고분자의 원료물질로서 주목받고 있다. 본 연구에서는 3차 amine인 TOA와 4차 amine 염인 Aliquat 336을 이용하여 succinic acid에 대한 반응추출을 실시하였다. 그 결과 Aliquat 336에 비해 TOA의 추출능이 더 높은 것으로 확인되었다. 또한 pH에 따른 추출능의 변화는 TOA, Aliquat 336 모두 pH 증가에 따라 추출능이 감소하는 것으로 나타났으며 Aliquat 336의 경우 pH의 영향은 TOA에 비해 적음을 알 수 있었다. succinic acid와 기하학적으로 다른 구조를 가지는 maleic acid의 경우 분자 내 수소 결합으로 인한 두 번째 카르복실기의 deprotonation이 어렵게 되므로 succinic acid에 비해 추출능이 좋은 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제26권5호
• /
• pp.791-794
• /
• 2005

A visible photochemistry of maleic to fumaric acid adsorbed on silver nanoparticle surfaces was investigated as probed by SERS using a simple flow method. Photoisomerization of maleic to fumaric acid was consecutively observed in the condition of various flow rates, which varied the exposure time of laser beam. The sequential SERS spectra of maleic acid indicated that the photochemical isomerization and desorption took place simultaneously on silver nanoparticle surfaces as a function of laser fluency and wavelength. For 530.9nm laser line excitation, the rate constant coefficients were obtained with a = 5.9 $sec^{-1}$ mW for isomerization and b = 13.9 $sec^{-1}$ mW for desorption, which $k_1\;=\;aI^n\;and\;k_2\;=\;bI^m$. Both reactions were one photon process (n = 1, m = 1) of a visible light and relatively fast process whose decay time was in the range of milli-second for 50 mW laser power. The rate of photochemical reaction increased on going toward the blue and photodesorption was a dominant process. A simple flow method used in this study was very useful to study a relatively fast photochemical reaction of molecules adsorbed on silver nanoparticle surfaces.

• 대한화학회지
• /
• 제21권1호
• /
• pp.67-72
• /
• 1977

말레酸化大豆油의 附加生成物의 分別과 그 特性을 究明하기 위하여 大豆油 助成 成分인 올레酸과 리놀酸을 말레酸無水物과 反應시켜, 이를 TLC에 依하여 分別하였다. 展開溶劑로서는 石油에테르 : 디에틸에테르 = 7 : 3∼5 : 5(vol/vol)에서 가장 分別이 잘 되었으며, 4區分으로 各各 分別되었으며, 이中에서 主生成物인 第 2區分을 IR 및 UV에 依하여 儉素한 結果는 올레酸附加物과 리놀酸附加物은 succinic acid 型 附加를 하고 있으며, 짝지은 디엔 $C_{18}$ 脂肪酸은 cyclohexene型의 附加를 이루고 있음을 確認 하였다.

• 생약학회지
• /
• 제29권4호
• /
• pp.360-364
• /
• 1998

To develop new elicitors inducing the high productivity of taxane derivatives, plant growth inhibitors, namely, maleic acid hydrazide, N-phosphomethyl glycine and succinic acid 2.2-dimethyl hydrazide, coconut milk and yeast extract were administrated in the cell suspension culture system of Taxus cuspidata, and the production of baccatin III were analysed. The effects of amino acid related with the biosynthesis of baccatin III were also examined in these culture system. As the results, a remarkable enhancement of baccatin III production was observed in the cultivation with coconut water and with maleic acid hydrazide.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.182-187
• /
• 2003

Low molecular weight copolymers of maleic anhydride and vinyl acetate were prepared to develop formaldehyde free cross-linking agents. Since lower molecular weight is favorable for efficient penetration of the finishing agent into the cotton fibers in the padding process, the concentration of the initiator, chain transfer agent and the monomer ratios were varied to obtain copolymers of low molecular weights. The prepared polymers were characterized by GPC, $^1{H-NMR}$, FTIR, DSC and TGA. Copolymers of molecular weights of 2 000 to 10 000 were obtained and it was found that the most efficient method of controlling the molecular weight was by varying the monomer ratios. Poly(maleic anhydride-co-vinyl acetate) did not dissolve in water, but the maleic anhydride residue hydrolyzed within a few minutes to form poly(maleic acid-co-vinyl acetate) and dissolved in water. However, the maleic acid units undergo dehydration to form anhydride groups on heating above ${160}^{\circ}C$ to some extent even in the absence of catalysts. The possibility of using the copolymers as durable press finishing agent for cotton fabric was investigated. Lower molecular weight poly(maleic anhydride-co-vinyl acetate) copolymers were more efficient in introducing crease resistance, which appears to be due to the more efficient penetration of the cross-linking agent into cotton fabrics. The wrinkle recovery angles of cotton fabrics treated with poly(maleic anhydride-co-vinyl acetate) copolymers were slightly lower than those treated with DMDHEU and were higher when higher curing temperatures or higher concentrations of copolymer were used, and when catalyst, $NaH_2$$PO_2$, was added. The strength retention of the poly(maleic anhydride-co-vinyl acetate) treated cotton fabrics was excellent.

• 한국미생물·생명공학회지
• /
• 제35권2호
• /
• pp.135-141
• /
• 2007

생마의 이용성과 저장성을 증대시키기 위해, 유기산을 처리한 생마 신선편이 제품을 제조하였다. 저온 부패미생물의 초기오염이 없는 생마 신선편이의 경우, 1% 농도의 초산, 구연산, 말레산 및 아스코르빈산을 각각 처리한 후 $4^{\circ}C$에서 14일간 저장한 경우, 구연산 및 아스코르빈산 처리구에서는 갈변 및 부패가 유의적으로 진행되었으나, 초산 및 말레산 처리구에서 우수한 갈변 및 부패 억제 활성이 나타났다. 이러한 억제활성은 기존에 사용되고 있는 NaOCl(100 ppm), 과산화수소수(100 ppm) 및 1종 세척제(L사, 한국)처리보다 우수하였으며, 특히 초기 부패미생물이 $10^5\;CFU/g-yam$ 이상 오염된 신선편이의 경우에도 초산 및 말레산은 강력한 부패억제 및 갈변억제효과를 나타내었다. 생마의 저온 부패미생물(Pseudomonas rhodesiae YAM-12 및 P. cepacia YAM-10)을 대상으로 초산 및 말레산의 최소처리농도를 조사한 결과 $4^{\circ}C$에서는 0.1% 처리로 우수한 항균력이 나타남을 확인하였으며, 실제 오염되지 않은 신선편이의 경우 0.1% 처리로 유의적인 갈변 및 부패현상 없이 14일간 저온저장이 가능하였다. 이러한 결과는, 초기 저온 부패미생물의 오염이 심각하지 않은 신선편이의 경우에는, 0.1% 초산 및 말레산 처리로 $4^{\circ}C$에서 14일 장기저장이 가능함을 나타내며, 적절한 진공포장 등이 병행된다면 생마 및 근채류 신선편이 농산물의 장기간 저온 유통이 가능할 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제20권4호
• /
• pp.372-376
• /
• 2003

Water-soluble cutting fluids are used for processing of aluminium materials. This short article describes properties of new additives of water-soluble cutting fluids for aluminium materials. Various Diels-Alder adducts of unsaturated fatty acids with acrylic acid of maleic anhydride were prepared by thermal reactions. Triethanolamine salts of Diels-Alder adducts of dehydrated castor oil fatty acids with acrylic acid or maleic anhydride showed excellent anti-corrosion property of aluminium materals. These thermal adducts showed anti-rust property for cast-iron chips, too.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.