• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.121-133
• /
• 2008

In manufacturing companies, engineering information is a central data which defines a product to be produced. This is changed by various factors such as changes of product configuration, changes of drawings information of a technology's licensor, etc, and these changes essentially accompany the changes of a product BOM (Bill of Materials) structure. Thus, engineering changes gives a heavy burden to information management within enterprise because the changes of product BOM have an influence on each departmental BOM such as a procurement BOM, a manufacturing BOM, a quotation BOM, etc. Especially, these changes of product BOM due to the engineering changes is inevitably and frequently happened by a customer's requirements in a customer-oriented make-to-order manufacturing environments. In these manufacturing environments, information gap among each department from the first contact point of customer to engineering, materials, production, quality, and management is very close, and thus it is very important that the change information of product BOM due to changes of product specification and engineering information are efficiently communicated among each department. This paper describes a procedure of determining product specification and of generating product BOM, and proposes an efficient management scheme for the change process of product BOM information due to changes of product specification and engineering. Also, to show the effectiveness of the proposed product BOM management scheme, a product BOM management system is implemented for the ship engine division of 'H' company, one of customer-oriented make-to-order manufacturing enterprises.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.2
• /
• pp.332-343
• /
• 2004

This is a study on expression and the extent of using make-up according to the lifestyle of woman. The purpose of this study is to induce factors which decide the lifestyle of woman, group them, understand groups＇ demographic characteristic and study on make-up expression and the extent of using make-up according to the lifestyle of groups. This survey is conducted to 611 women and analyzed with SPSS package. The result of a study is as follows： 1. We classified them into 5 factors such as factors of make-up preference, arance-oriented, economy and information-oriented, daily make-up, and interest in make-up with the method of AIO analysis. Then I researched groups on the basis of the mean of those factors. As a result, it is classified as a make-up oriented group, a consciously daily make-up group, a unconcern of make-up group, and a reasonable make-up pursuit group. 2. The demographic characteristic according to the classified lifestyles showed the difference as a result of variance analysis of age, marital status, job, education, and monthly pay. 3. A result of variance analysis on the extent of satisfaction with their faces according to the lifestyle showed the difference of facial satisfaction with complexion, skin, eyes, nose and so on. 4. We analyzed a reason of make-up, a extent of make-up, image to express, the most concerning part for make-up, and the type of cosmetics which people use most in order to know the difference of make-up expression and the extent of using make-up. As a result, its variance showed the difference among groups.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.269-276
• /
• 2011

This paper considers the rail crane scheduling problem with minimizing the sum of the range of order completion time and make-span of rail crane simultaneously. The range of order completion time implies the difference between the maximum of completion time and minimum of start time. Make-span refers to the time when all the tasks are completed. At a rail terminal, logistics companies wish to concentrate on their task of loading and unloading container on/from rail freight train at a time in order to increase the efficiency of their equipment such as reach stacker. In other words, they want to reduce the range of their order completion time. As a part of efforts to meet the needs, the crane schedule is rearranged based on worker's experience. We formulate the problem as a mixed integer program. To validate the effectiveness of the model, computational experiments were conducted using a set of data randomly generated.

• Korean Journal of Human Ecology
• /
• v.16 no.4
• /
• pp.885-897
• /
• 2007

The women selected by random sampling were classified into four groups according to their body cathexis and make-up attitude in order to investigate influences in psychological expecter effects of make-up. For the study, a questionnaire survey was conducted of 436 women in between their twenties to fifties residing in the Kyeongnam region. Obtained data were analyzed pearson's correlation coefficient and multiple regression analysis. The result are as follows. Cluster was classified into four groups: positive congruity(G1), positive incongruity(G2), negative congruity(G3), negative incongruity(G4). The make-up behaviors were found to be very influential factors, and so were desires and clothing values in some degree. But, the psychological expecter effects of make-up according to body cathexis and make-up attitude of adult women showed a difference in subordinate factors of desire, clothing value, and make-up behavior in view of their peculiarities classified in detail.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.79-86
• /
• 2006

Especially, MTO(Make-To-Order) companies take collaborative approaches with their partner companies to make low-price products and/or technologically low intensive products. The collaborative approach to manufacturing requires collaboration with partner companies for inventory review, production plan, and manufacturing to fulfill customer's orders. However, frequent changes of partnerships binder partner companies from sharing production information in effective ways since their information systems have different data architectures and platforms. Therefore, it is required flexible and standardized system integration approach fir effective information sharing. This research studies current status and problems of collaborative production system, proposes an architecture for collaborative production systems based on Web Services which is a standard information technology, and discusses expected effects and the vision of Web Services.

• Journal of the Korea Society for Simulation
• /
• v.20 no.2
• /
• pp.19-27
• /
• 2011

This study investigates impact of smoothed replenishment ordering policy on the performance measures such as lead time, order fulfillment ratio, and inventory cost. We consider a two-echelon supply chain: a single retailer orders using smoothed order up to replenishment policy and a manufacturer produces the retailer's orders on a make to order basis. Simulation result confirms that lead time from the manufacturer can be reduced by smoothed ordering policy as expected. However, smoothing orders may deteriorate the customer order fulfillment ratio and inventory cost in a retailer. We also observe that variance of manufacturing time contributes more than mean of manufacturing time to both order fulfillment ratio and inventory cost. Therefore, variability of upstream manufacturing time should be minimized.

• Journal of ILASS-Korea
• /
• v.20 no.3
• /
• pp.181-186
• /
• 2015

This study presents the dynamic wetting characteristics of an impact droplet on hole-patterned textured surfaces. The flat surfaces were manufactured by a drilling machine to generate the micro-order holes, leading to make the surface hydrophobic. Other flat surfaces were fabricated by the anodizing technique to make hydrophilic texture surfaces with a nanometer order. For hydrophilic and hydrophobic textured surfaces with similar texture area fractions, the impinging droplet experiments were conducted and compared with flat surface cases. As results, an anodized textured surface decreases apparent equilibrium contact angle and increases contact diameters, because of increase in contact area and surface energy. This is attributed to more penetration inside holes from larger capillary pressure on nanometer-order holes. On the other hand, temporal evolution of the contact diameter is smaller for the hydrophobic textured surface from less penetration on the micro-order holes.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.2 s.2
• /
• pp.39-46
• /
• 2005

Art-Make-up has resulted in occupying one of the central areas of this culture. Art Make-up is currently undergoing various changes. The viewpoint of modern make-up is the infiniteness of emotion such as the subjectively individualized expressions and aesthetic values breaking with conventional thought. The most significant change is the idea of the 'grotesque'. The purpose of this research is to re-clarify the development of the diversity, professionalism and artistic feature through the study of Art make-up based on the 'grotesque' style. This also strives to focus attention at observing the deep and mysterious workings of the human inner world. In order to explain the features of 'grotesque' Art make-up, six images below are presented. Firstly, Inharmonious images. Secondly, disgusting inhuman images. Thirdly, mechanical images. Fourthly, distorted and exaggerated images. Fifthly, diabolic and horrific images. And, lastly, playful images. These six images thoroughly demonstrate the 'grotesque' features. The fact at we can see the 'grotesque' features in Art make-up explains the enormous growth of Art make-up and the unlimited range of expression in this field. It also implies that the choice of material and theme is not restricted to universal artistic criteria. In closing, it is necessary that Art make-up is thought of not as actual art but more as a tool for its subjects. As a result, this research will provide valuable information for studies in the future.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.135-143
• /
• 2009

In the casting industry field, a lot of researches have been carried out to maximize soundness and productivity and improve quality of mass produced products. The researches on the optimum mould design by using computer simulation have achieved a lot of accomplishments in the die-casting process especially. Their results are utilized to mass-produce sound products in their field. But there are some difficulties to use the simulation in order to make the design of product and mould. In general, repetitive calculations of computer simulation require much analyzing time in order to make sound design of them. Another difficulty is that only expertise technicians can analyze results of the simulation. In order to solve such a problem, we are building mould design optimization system which consists of knowledge-based module, simulation, optimization module and interactive modeler(it is based on the commercial modeler). By using and interacting between these modules of that system, we can easily make an optimum design of mould and construct the database. This study introduce the general process of the system and connection method between the modules is mentioned above and some examples to apply it to real product.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.1
• /
• pp.117-129
• /
• 2008

Make-to-order manufacturers with multiple plants at multiple sites need to have the ability to quickly determine which plant will produce which customer order to meet the due date and minimize the transportation cost from the plants to the customer. Balancing the work loads and minimizing setups and make-span are also of great concern. Solving such scheduling problems usually takes a long time. We propose a new approach, which we call 'preprocessing', for resolving such complex problems. In preprocessing scheme, a 'good' a priori schedule is prepared and maintained using unconfirmed order information. Upon the confirmation of orders. the preprocessed schedule is quickly modified to obtain the final schedule. We present a preprocessing solution algorithm for multi-site constraint scheduling problem (MSCSP) using genetic algorithm; and conduct computational experiments to evaluate the performance of the algorithm.