Journal of ILASS-Korea (한국분무공학회지)

Institute for Liquid Atomization and Spray Systems-Korea (한국분무공학회)
권호 표지
DOI QR코드

DOI QR Code

Wetting Characteristic of Single Droplet Impinging on Hole-Patterned Texture Surfaces

홀 패턴 텍스쳐 표면에서 충돌하는 단일 액적의 젖음 특성

  • 문주현 (중앙대학교 기계공학부) ;
  • 이상민 (중앙대학교 기계공학부) ;
  • 정정열 (선박해양플랜트연구소 해양플랜트산업기술센터) ;
  • 이성혁 (중앙대학교 기계공학부)
  • Received : 2015.09.06
  • Accepted : 2015.09.18
  • Published : 2015.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study presents the dynamic wetting characteristics of an impact droplet on hole-patterned textured surfaces. The flat surfaces were manufactured by a drilling machine to generate the micro-order holes, leading to make the surface hydrophobic. Other flat surfaces were fabricated by the anodizing technique to make hydrophilic texture surfaces with a nanometer order. For hydrophilic and hydrophobic textured surfaces with similar texture area fractions, the impinging droplet experiments were conducted and compared with flat surface cases. As results, an anodized textured surface decreases apparent equilibrium contact angle and increases contact diameters, because of increase in contact area and surface energy. This is attributed to more penetration inside holes from larger capillary pressure on nanometer-order holes. On the other hand, temporal evolution of the contact diameter is smaller for the hydrophobic textured surface from less penetration on the micro-order holes.

Keywords

References

  1. A. L. Yarin, "Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing", Annual Reviews of Fluid Mechanics, Vol. 38, 2005, pp. 159-192.
  2. C. G. L. Furmidge, "Studies at Phase Interfaces I. The Sliding of Liquid Drops on Solid Surfaces and a Theory for Spray Retention", Journal of Colloid Science, Vol. 17, 1962, pp. 309-324. https://doi.org/10.1016/0095-8522(62)90011-9
  3. H. Liu, 2000, "Science and Engineering of Droplets", William Andrew.
  4. E. B. Dussan V., "On The Spreading of Liquids on Solid Surfaces: Static and Dynamic Contact Lines", Annual Review of Fluid Mechanics, Vol. 11, 1979, pp. 371-400. https://doi.org/10.1146/annurev.fl.11.010179.002103
  5. S. Chandra and C. T. Avedisian, "On the Collision of a Droplet with a Solid surface", Proc. R. Soc. Lond. A, Vol. 432, 1991, pp. 13-41. https://doi.org/10.1098/rspa.1991.0002
  6. R. Rioboo, M. Voue, A. Vaillant and J. De Coninck, "Drop Impact on Porous Superhydrophobic Polymer Surfaces", Langmuir, Vol. 24, 2008, pp. 14074-14077. https://doi.org/10.1021/la802897g
  7. M. Pasandideh-Fard, R. Bhola, S. Chandra and J. Mostaghimi, "Deposition of Tin Droplets on a Steel Plate: Simulation and Experiments", International Journal of Heat and Mass Transfer, Vol. 41, 1998, pp. 2929-2945. https://doi.org/10.1016/S0017-9310(98)00023-4
  8. H. S. Park, J. Y. Zhu and J. F. Morris, "Single Drop Impaction on a Solid Surface", AIChE Journal, Vol. 49, 2003, pp. 2461-2471. https://doi.org/10.1002/aic.690491003
  9. I. Vakarelski, N. Patankar, J. Marston, D. Chan and S. Thoroddsen, "Stabilization of Leidenfrost vapour layer by textured superhydrophobic surfaces", Nature, Vol. 489, 2012, pp. 274-277. https://doi.org/10.1038/nature11418
  10. J. Lee and S. Lee, "Dynamic wetting and spreading characteristics of a liquid droplet impinging on hydrophobic textured surfaces", Langmuir, Vol. 27, 2011, pp. 6565-6573. https://doi.org/10.1021/la104829x
  11. C. Ran, G. Ding, W. Liu, Y. Deng and W. Hou, "Wetting on nanoporous alumina surfaces: transition between Wenzel and Cassie states controlled by surfaces structure", Langmuir, Vol. 24, 2008, pp. 9952-9955. https://doi.org/10.1021/la801461j
  12. J. Yang, J. Yang, C. Wang, X. He, Y. Le, J. Chen and F. Zhou, "Intermediate wetting states on nanoporous structures of anodic aluminum oxide structures", Thin Solid Films, Vol. 562, 2014, pp. 353-360. https://doi.org/10.1016/j.tsf.2014.04.020

Cited by

  1. Dynamic wetting and heat transfer characteristics of a liquid droplet impinging on heated textured surfaces vol.97, 2016, https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.041