• 자원환경지질
• /
• 제29권2호
• /
• pp.171-182
• /
• 1996

제 4기 전곡현무암은 추가령 열곡대내의 한탄강유로를 따라 길게 분포하고 있으며 이대성 외 (1983)에 의하면 대략 10-20 m정도의 두께를 가지고 있다. 전곡현무암의 암석분화 과정을 밝히기 위해 57개의 시료가 채취 되었으며, 이중 16개의 시료에 대한 주성분 및 미량원소의 화학분석이 실시되었다. 분석된 시료들의 화학조성에 의하면 전곡현무암은 알칼리계열의 현무암으로 특징지워지며, MgO를 제외한 주성분원소의 변화범위가 미량원소에 비하여 상당히 좁은 영역을 나타낸다. 분별결정작용 모델을 정량적으로 시험하기 위해서 Multiple linear regression을 사용하였다. 주성분원소와 반정으로 산출되는 광물의 화학조성을 사용하여 계산된 결과는 전곡현무암의 화학조성의 변화는 감람석, 사장석, 휘석, 자철석이 56 : 25 : 17 : 2의 비율로 분별정출되어 분화된 것으로 설명할 수 있다. 그러나 위의 결과를 가지고 미량원소의 함량을 계산하면 불호정 (incompatible) 원소의 계산치는 딸암석의 실제 함량에 미치지 못한다. 이러한 점으로 미루어 전곡현무암의 화학조성의 변화는 광물들의 단순한 분별정출 작용만으로는 설명하기가 어렵다. 따라서 전곡현무암의 화학조성의 변화는 약간 다른 정도의 부분용융에 의해 불호정 원소의 초기치가 다른 것들이 분별정출과정을 겪었거나, 혹은 RTF과정에 의한 불호정원소의 부화가능성을 배제할 수 없음을 시사한다.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.181-210
• /
• 1997

The stress distribution generated in the surrounding bone was calculated and compared for various geometry of the dental implants by means of the finite element methods. The models were designed to represent the screw type endosseous implants(varing the size, shape, direction of the screw thread and the angle of the body) with supporting bone and the cylinder type endosseous implants(varing the lower portion-Round type, tapered type) with supporting bone. Static mean bite forces were applied 100N vertically and 25N horizontally on the center of the implant and three dimensional finite analysis was undertaken using software ANSYS 5.1 Version. The result demonstrated that different implant shape leads to significant variations in stress distribution in the bone. In the case of variation of the screw size, direction and shape the implant model with normally directional and triangular screw implied lower stress than with upper directional or lower directional and quadrangular screw but among models a different screw size, within a variation of 0.2mm there was no meaningful difference in maximum stress. In the case of variation of angle of body the straight implied lower stress than the tapered. As a result of analysis of cylinder type, the implants with larger radius of curvature of the round form and larger diameter of the tapered form implied lower stress.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.470-473
• /
• 2009

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• 소성∙가공
• /
• 제19권5호
• /
• pp.273-276
• /
• 2010

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• 소성∙가공
• /
• 제9권2호
• /
• pp.128-139
• /
• 2000

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of wrinkles are influenced by many factors such as stress state, mechanical properties of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show a wide variation for small deviations of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth. All the above mentioned factors are conveniently considered by the finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing a column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.28-31
• /
• 1998

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of the wrinkles are influenced by many factors such as stress state, mechanical properites of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show wide variation for small deviation of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth, All the above mentioned factors are conveniently considered by finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. The finite element analysis is carried out using the continuum-based resultant shell elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing to column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.63-66
• /
• 2005

Nanoimprint lithography (NIL) process at room temperature has been newly proposed in recent years to overcome the shape accuracy and sticking problem induced in a conventional NIL process. Success of the room temperature NIL relies on the accurate understand of the mechanical behavior of the polymer. Since a conventional NIL process has to heat a polymer above the glass transition temperature to deform the physical shape of the polymer with a mold pattern, viscoelastic property of polymer have major effect on the NIL process. However, rate dependent behavior of polymer is important in the room temperature NIL process because a mold with engraved patterns is rapidly pressed onto a substrate coated with the polymer by the hydraulic equipment. In this paper, finite element analysis of the room temperature NIL process is performed with considering the strain rate dependent behavior of the polymer. The analyses with the variation of imprinting speed and imprinting pattern are carried out in order to investigate the effect of such process parameters on the room temperature NIL process. The analyses results show that the deformed shape and imprint force is quite different with the variation of punch speed because the dynamic behavior of the polymer is considered with the rate dependent plasticity model. The results provide a guideline for the determination of process conditions in the room temperature NIL process.

• Genomics & Informatics
• /
• 제14권3호
• /
• pp.70-77
• /
• 2016

Transposable elements are one of major sources to cause genomic instability through various mechanisms including de novo insertion, insertion-mediated genomic deletion, and recombination-associated genomic deletion. Among them is Alu element which is the most abundant element, composing ~10% of the human genome. The element emerged in the primate genome 65 million years ago and has since propagated successfully in the human and non-human primate genomes. Alu element is a non-autonomous retrotransposon and therefore retrotransposed using L1-enzyme machinery. The 'master gene' model has been generally accepted to explain Alu element amplification in primate genomes. According to the model, different subfamilies of Alu elements are created by mutations on the master gene and most Alu elements are amplified from the hyperactive master genes. Alu element is frequently involved in genomic rearrangements in the human genome due to its abundance and sequence identity between them. The genomic rearrangements caused by Alu elements could lead to genetic disorders such as hereditary disease, blood disorder, and neurological disorder. In fact, Alu elements are associated with approximately 0.1% of human genetic disorders. The first part of this review discusses mechanisms of Alu amplification and diversity among different Alu subfamilies. The second part discusses the particular role of Alu elements in generating genomic rearrangements as well as human genetic disorders.

• 자원환경지질
• /
• 제29권5호
• /
• pp.561-573
• /
• 1996

The igneous rocks in the Goseong area, the southwestern part of the Gyeongsang basin, are composed of the volcanic rocks, Bulgugsa granites and intrusive andesites. The volcanic rocks are andesitic lapilli tuff, dacite and rhyolite. The granites are mainly of hornblende-biotite granite and intruded into the sedimentary basement and the volcanic rocks. The intrusion of andesitic dyke is thought to be the latest igneous activity in the area. In the variation diagrams of the major oxides, the three igneous rock types show different variational trends, indicating that they were from the different magmatic pulses. K-Ar radiometric ages suggest that the igneous activity in the Goseong area had occurred during late Cretaceous period. The ages of the volcanic rocks seem likely to have become younger due to the thermal effect by the granitic intrusion. The major element compositoinal variation of the granites from the Goseong area are compared with those from the Jindong, Geoje and Masan areas. By the comparison, it is easily understood that the Jindong granites are fairly different from the other three granites. On the other hand, the Goseong, Geoje and Masan granites generally show similar variational trends with each other, suggesting that they are of similar genetic origin. Combining the similarity of the geochemical features and the difference of the intruding ages between the Goseong and Masan granites, it seems like that the magma generation from the same source materials had occurred at a temporal interval.

• 암석학회지
• /
• 제3권2호
• /
• pp.109-127
• /
• 1994

We report field relationship, petrography and major and trace element chemistry for the central part of the Seoul granitic bathlith of Jurassic age occurring in the Kyonggi massif. The batholith consists mainly of biotite granite (BG) and garnet biotite granite (GBG) with minor tonalite-quartz diorite and biotite granodiorite with or without hornblende. The mode data, along with the those reported by Hong (1984) for the biotite granite (south-BG) in the southern part of the batholith, indicate that the many of BGs and majority of GBG and south-BG are leucocratic. Major element data indicate that these predominant rocks of the batholith are peraluminous. Variation trends in Harker diagrams for the major and trace elements suggest that the BG and GBG are not related by a simple crystal fractionation process. The same is true between the central (BG and GBG) and the southern (south-BG) parts of the batholith, suggesting that the central and southern parts of the Seoul batholith may consist of three separate intrusions. Tectonic discriminations using major and trace element data and the age of emplacement suggest that the batholith represents Jurassic plutonism related to an orogeny, perhaps to a subduction-related continental magmatic arc.