• 한국유통학회지:유통연구
• /
• 제15권3호
• /
• pp.111-137
• /
• 2010

본 연구는 서비스 시장에서의 지각된 품질과 개인가치간의 인과적 관계 및 고객의 인지욕구에 따른 온 오프라인상의 조절효과에 대해 실증분석하였으며 이를 통해 개인가치에 대한 서비스 전략과 마케팅 관리의 중요성을 제시하고 있다. 서비스 시장에서 서비스 제공자와 구매자간의 장기적 거래관계의 중요성이 크게 부각됨에 따라 관계구축 및 강화에 매우 중요한 역할을 하는 개인가치에 관한 연구는 학계뿐만 아니라 실무적으로도 고객관계관리의 관점에서 시사하는 바가 크다고 할 수 있다. 실증분석을 위해 대형마트(할인점)와 인터넷 쇼핑몰을 이용하는 고객을 대상으로 설문을 통해 데이터를 수집하였으며 온 오프라인의 비교분석을 통한 차이검증을 위한 인과적 구성모델에 대해 구조방정식 모델분석을 통해 가설검증하였다. 구성모델에 대한 분석결과 물리적 환경, 상호작용 품질, 그리고 결과품질로 구성된 지각된 품질은 안정적 삶, 사회적 인식, 사회적 통합으로 구성된 서비스 개인가치에 통계적으로 매우 유의한 정(+)의 영향을 미치는 것으로 나타났으며 집단간 차이효과분석을 통해서도 온 오프라인에 따른 조정효과는 온라인에서보다는 오프라인에서 더 유의한 것으로 나타났다. 그리고 온라인상에서의 서비스에 대한 인지욕구가 높을 때보다는 오프라인상에서의 서비스에 대한 인지욕구가 높을 때 개인가치에 더 유의한 영향을 미치는 것으로 나타났다. 마지막으로 본 연구의 구성모델에 대한 적합도 역시 수용할만한 수준인 것으로 나타났다.

• 농업과학연구
• /
• 제13권1호
• /
• pp.1-16
• /
• 1986

새로운 유전(遺傳) 육종적(育種的) 재료(材料)를 얻고 탐색(探索)하기 위하여 수집(蒐集)한 재래종(在來種) 옥수수 262계통(系統)의 형태적(形態的) 특성분류(特性分類) 및 그 특성(特性)의 분포(分布), 상관(相關)둥을 요약(要約)하면 다음과 같다. 1. 각(各) 특성(特性)을 살펴 보면 개화소요일수(開花所要日數)에서 66일(日) 이하(以下)가 47%, 67~78일(日) 47%, 79일(日) 이상(以上)이 8%로 조(早) 중생(中生)에 고루 분포(分布)하였고 기타(其他) 특성(特性)들은 평균식(平均植)를 중심(中心)으로 양편에 고루 분포(分布)하였다. 2. 분얼수(分蘖數)는 변이계수(變異係數)가 49.2%로 특성(特性)들 중(中)에서 가장 큰 변이(變異)를 보였고 자수경(雌穗俓) 립중(粒重), 100립중(粒重), 착수고(着穗高), 초장(草長), 자수장(雌穗長) 등에서 각각(各各) 36.1, 27.2, 20.0, 16.3% 등으로 비교적 변이(變異)의 폭(幅)이 컸고 자수경(雌穗經), 입(粒)의 장(長), 폭(幅), 후(厚) 및 자수열수(雌穗列數), 개화소요일수(開化所要日數) 등에서 작은 변이(變異)를 보였다. 3. 특성(特性)들간에는 초장(草長)과 착수고(着穗高), 자수장(雌穗長), 자수경(雌穗俓), 분얼수(分蘖數), 개화소요일수(開花所要日數)와 높은 정(正)의 상관(相關)을 보였고, 100 립중(粒重), 자수당립(雌穗當粒)은 립(粒)의 장(長), 폭(幅), 후(厚) 및 초장(草長)과 높은 정(正)의 상관(相關)을 보였다. 4. 계통간(系統間)의 Euclidean distance에 의해 분류(分類)한 4개(個)의 군(群)은 I군(群)에 110개(個), II군(群)에 74개(個), III군(群)에 66개(個), IV군(群)에 12개(個) 계통(系統)이 속(屬)하였으며, 계통군(系統群) I은 조생(早生), 중간(中稈), 대립(大粒), 대형자수(大型雌穗)의 특징(特徵)을 계통군(系統群)II는 중생(中生), 중간(中稈), 중립(中粒), 소형자수(小型雌穗)의 특징(特徵)을, 계통군(系統群)III은 중생(中生), 중간(中稈), 대립(大粒), 중형자수(中型雌穗)의 특징(特徵)을 계통군(系統群)IV는 만생(晩生), 장간(長稈), 소형자수(小型雌穗), 소립(小粒), 다분얼(多分蘖)의 특징(特徵)을 각각(各各) 보였다. 5. 분류(分類)한 군별(群別) 평균초장(平均草長)은 I 군(群)과 II 군(群), II군(群)과 III, IV군(群) 사이에 유의차(有意差)가 인정(認定)되었고, 이삭의 크기에서는 IV군(群)과 II군(群), IV군(群)과 III군(群) 사이를 제외(除外)한 모든 군(群)사이에, 립(粒)의 크기는 II군(群)과 IV군(群) 사이를 제외한 모든 군(群)사이에 100 립중(粒重), 이삭당립중(當粒重)은 모든 군간(群間)에, 이삭열수(列數)는 I군(群)과 II군(群), IV군(群)과 I, II, III군(群) 사이에, 분얼수(分蘖數)와 개화일수(開花日數)는 IV군(群)과 I, II, II군(群) 사이에 각각(各各)그 유의차(有意差)가 인정(認定)되었다. 6. 강원도(江原道)와 제주도(濟州道)를 제외(除外)한 지역(地域)에서 수집(蒐集)한 옥수수를 지역별(地域別)로 나누었을 때 북서부평야지(北西部平野地)와 중부산악지(中部山岳地)의 옥수수는 중생(中生), 중간(中稈), 대형자수(大型雌穗), 대립(大粒)의 특징(特徵)을 중동부산악지(中東部山岳地)의 옥수수는 중생(中生), 중간(中稈), 중형자수(中型雌穗), 중립(中粒)의 특징(特徵)을 중서부평야지(中西部平野地)의 것은 중생(中生), 단간(短稈), 중형자수(中型雌穗), 중립(中粒)의 특징(特徵)을 남동부평야지(南東部平野地)의 것은 조생(早生), 단간(短稈), 소형자수(小型雌穗), 중립(中粒)의 특징(特徵)을 중남부산악지(中南部山岳地)의 것은 만생(晩生), 중간(中稈), 중형자수(中型雌穗), 소립(小粒), 다분얼(多分蘖)의 특징(特徵)을 남서부평야지(南西部平野地)의 것은 만생(晩生), 장간(長稈), 중형자수(中型雌穗), 소립(小粒), 다분얼(多分蘖)의 특징(特徵)을 나타내는 경향(傾向)을 보였다.

• 한국유통학회지:유통연구
• /
• 제16권1호
• /
• pp.95-115
• /
• 2011

본 연구는 Kano모델을 활용하여 프랜차이즈 매장에 관한 다양한 품질요인들의 속성을 고객의 관점에서 분류하였다. 또한, 각 품질요인들이 고객의 만족 또는 불만족에 미치는 상대적 영향력을 분석해 보고자 만족지수와 불만족지수를 산출하였다. 자료 수집을 위해 외식 프랜차이즈 매장 방문 경험이 있는 서울 및 전국광역시 거주 성인들을 대상으로 온라인조사를 실시하였으며, 총 257개의 응답이 분석에 사용되었다. 분석 결과, 해당 품질요소가 충족이 되지 않는 경우 소비자의 불만으로 이어지는 요소에는 매장 청결도, 직원 친절도 및 숙련도, 편의시설 제공 등이 포함되는 것으로 나타났다. 프랜차이즈 사업에서 매장 간 음식메뉴의 구색, 가격, 품질수준, 인테리어, 고객서비스 절차 등의 표준화는 중요하게 생각되어 왔으나, 이 중 음식 가격의 동일성만이 고객의 불만족과 깊은 관계를 가지고 있었다. 충족이 되지 않아도 상관없지만 충족이 되는 경우 고객들의 호의적인 반응을 이끌어낼 수 있는 요소로는 외부기관으로부터의 수상 또는 인증 경력, 프랜차이즈 브랜드의 해외진출, 경품이벤트 및 사용금액에 따라 혜택을 주는 로열티 프로그램의 실시, 그리고 우수한 매장접근성이 해당되었다. 프랜차이즈 브랜드를 상대적으로 자주 이용하는 헤비유저의 경우, 정기적인 신메뉴 출시 또한 매력적인 품질요인으로 생각하고 있었다. 본 논문은 경영자가 우선적으로 관심을 두고 개선하여야 하는 부분과 경쟁력 확보를 위해 추가적으로 투자해야 할 부분이 어디인가에 대한 시사점을 제공해 준다는 점에서 연구의 의의가 있다.

• Asia pacific journal of information systems
• /
• 제22권1호
• /
• pp.29-52
• /
• 2012

Consumers differ in the way they make a purchase. An audio mania would willingly make a bold, yet serious, decision to buy a top-of-the-line home theater system, while he is not interested in replacing his two-decade-old shabby car. On the contrary, an automobile enthusiast wouldn't mind spending forty thousand dollars to buy a new Jaguar convertible, yet cares little about his junky component system. It is product involvement that helps us explain such differences among individuals in the purchase style. Product involvement refers to the extent to which a product is perceived to be important to a consumer (Zaichkowsky, 2001). Product involvement is an important factor that strongly influences consumer's purchase decision-making process, and thus has been of prime interest to consumer behavior researchers. Furthermore, researchers found that involvement is closely related to perceived risk (Dholakia, 2001). While abundant research exists addressing how product involvement relates to overall perceived risk, little attention has been paid to the relationship between involvement and different types of perceived risk in an electronic commerce setting. Given that perceived risk can be a substantial barrier to the online purchase (Jarvenpaa, 2000), research addressing such an issue will offer useful implications on what specific types of perceived risk an online firm should focus on mitigating if it is to increase sales to a fullest potential. Meanwhile, past research has focused on such consumer responses as information search and dissemination as a consequence of involvement, neglecting other behavioral responses like online merchant selection. For one example, will a consumer seriously considering the purchase of a pricey Guzzi bag perceive a great degree of risk associated with online buying and therefore choose to buy it from a digital storefront rather than from an online marketplace to mitigate risk? Will a consumer require greater trust on the part of the online merchant when the perceived risk of online buying is rather high? We intend to find answers to these research questions through an empirical study. This paper explores the impact of enduring product involvement and perceived risks on required trust level, and further on online merchant choice. For the purpose of the research, five types or components of perceived risk are taken into consideration, including financial, performance, delivery, psychological, and social risks. A research model has been built around the constructs under consideration, and 12 hypotheses have been developed based on the research model to examine the relationships between enduring involvement and five components of perceived risk, between five components of perceived risk and required trust level, between enduring involvement and required trust level, and finally between required trust level and preference toward an e-tailer. To attain our research objectives, we conducted an empirical analysis consisting of two phases of data collection: a pilot test and main survey. The pilot test was conducted using 25 college students to ensure that the questionnaire items are clear and straightforward. Then the main survey was conducted using 295 college students at a major university for nine days between December 13, 2010 and December 21, 2010. The measures employed to test the model included eight constructs: (1) enduring involvement, (2) financial risk, (3) performance risk, (4) delivery risk, (5) psychological risk, (6) social risk, (7) required trust level, (8) preference toward an e-tailer. The statistical package, SPSS 17.0, was used to test the internal consistency among the items within the individual measures. Based on the Cronbach's ${\alpha}$ coefficients of the individual measure, the reliability of all the variables is supported. Meanwhile, the Amos 18.0 package was employed to perform a confirmatory factor analysis designed to assess the unidimensionality of the measures. The goodness of fit for the measurement model was satisfied. Unidimensionality was tested using convergent, discriminant, and nomological validity. The statistical evidences proved that the three types of validity were all satisfied. Now the structured equation modeling technique was used to analyze the individual paths along the relationships among the research constructs. The results indicated that enduring involvement has significant positive relationships with all the five components of perceived risk, while only performance risk is significantly related to trust level required by consumers for purchase. It can be inferred from the findings that product performance problems are mostly likely to occur when a merchant behaves in an opportunistic manner. Positive relationships were also found between involvement and required trust level and between required trust level and online merchant choice. Enduring involvement is concerned with the pleasure a consumer derives from a product class and/or with the desire for knowledge for the product class, and thus is likely to motivate the consumer to look for ways of mitigating perceived risk by requiring a higher level of trust on the part of the online merchant. Likewise, a consumer requiring a high level of trust on the merchant will choose a digital storefront rather than an e-marketplace, since a digital storefront is believed to be trustworthier than an e-marketplace, as it fulfills orders by itself rather than acting as an intermediary. The findings of the present research provide both academic and practical implications. The first academic implication is that enduring product involvement is a strong motivator of consumer responses, especially the selection of a merchant, in the context of electronic shopping. Secondly, academicians are advised to pay attention to the finding that an individual component or type of perceived risk can be used as an important research construct, since it would allow one to pinpoint the specific types of risk that are influenced by antecedents or that influence consequents. Meanwhile, our research provides implications useful for online merchants (both online storefronts and e-marketplaces). Merchants may develop strategies to attract consumers by managing perceived performance risk involved in purchase decisions, since it was found to have significant positive relationship with the level of trust required by a consumer on the part of the merchant. One way to manage performance risk would be to thoroughly examine the product before shipping to ensure that it has no deficiencies or flaws. Secondly, digital storefronts are advised to focus on symbolic goods (e.g., cars, cell phones, fashion outfits, and handbags) in which consumers are relatively more involved than others, whereas e- marketplaces should put their emphasis on non-symbolic goods (e.g., drinks, books, MP3 players, and bike accessories).

• 생명과학회지
• /
• 제21권3호
• /
• pp.393-399
• /
• 2011

본 연구에서 장류 및 젓갈 유래 균체를 각각 sonication, $100^{\circ}C$에서 30 min, $125^{\circ}C$에서 15 min의 조건으로 추출하여 HMC-1에 처리하였을 때, 이 추출방법에 따른 HMC-1매개 염증반응 억제효과를 조사하였다. 추출방법을 달리하여 추출한 장류 및 젓갈 유래 균체 J80, G147이 HMC-1생존율에 미치는 영향은 대조구 B (Not treated)와 비교하였을 때 86~96%로 유의적 차이를 보이지 않아 장류 및 젓갈 유래 균체에 의한 세포 독성은 나타나지 않았다. 장류 및 젓갈 유래 균체의 모든 전처리구에서 histamine 유리 억제효과를 나타내었으며 특히, $100^{\circ}C$에서 30 min 동안 가열하였을 때 histamine 억제율이 J80에서 28.86%, G147에서 41.14%으로 가장 높게 나타냈다. IL-8 분비량은 J80, G147의 모든 전처리구에서 IL-8 분비억제효과가 나타났으며, J80의 경우 $100^{\circ}C$, 30 min에서 처리한 구에서 분비량이 0.78 ng/ml로 대조구 B (Not treated)에 비하여 약 28.45%의 분비억제효과로 가장 높게 나타내었다. G147의 경우 $125^{\circ}C$, 15 min에서 처리한 구에서 분비량이 0.73 ng/ml로 약 36.52%의 분비억제효과로 가장 높게 나타내었다. IL-6 분비량을 측정한 결과 J80, G147의 모든 실험구에서 IL-6 분비억제효과가 나타났으며, J80에서는 $100^{\circ}C$, 30 min한 D구의 분비량이 0.40 ng/ml으로 대조구 B (Not treated)에 비하여 약 38.46%의 분비억제효과로 가장 높았으며, G147 역시 $100^{\circ}C$, 30 min 동안 처리한 D구의 분비량이 0.27 ng/ml으로 대조구 B (Not treated)에 비하여 56.45%의 분비억제효과로 가장 높게 나타냈다. TNF-${\alpha}$ 분비량 역시 IL-6와 마찬가지로 J80, G147에서 대조구 B보다 낮은 분비량으로 TNF-${\alpha}$ 분비 억제효과가 나타났으며 J80의 경우 $100^{\circ}C$, 30 min 처리한 D의 TNF-${\alpha}$ 분비량이 0.052 ng/ml으로 66.67%의 분비억제효과로 가장 높았으며, G147의 경우 sonication을 처리한 C구의 TNF-${\alpha}$ 분비량이 0.086 ng/ml으로 41.1%의 분비억제효과로 다른 구에 비해 높은 억제효과를 나타내었다. 위의 결과를 통해서 장류 및 젓갈 유래 균체의 3가지 전처리 방법 중 $100^{\circ}C$, 30 min 처리 시 염증 반응 억제 효과가 가장 높을 것으로 예상된다. 결과를 미루어보아 장류를 섭취하는 대표적인 방법인 가열하여 찌개로 조리과정 중 장류 및 젓갈 속의 균체가 열에 가열되면서 염증억제효과 높일 수 있는 가장 좋은 조리 방법으로 사료되며, 이는 대중들이 가장 가깝게 염증반응 억제효과를 볼 수 있는 식품일 것이다. 또한 염장처리과정만을 거친 젓갈을 섭취하는 것보다 열처리과정을 거친 젓갈을 섭취할 경우 염증억제효과를 더 높일 수 있을 것으로 예상된다.

• 항공우주정책ㆍ법학회지
• /
• 제30권2호
• /
• pp.427-468
• /
• 2015

지금까지 우주시대의 개막과 더불어 설립된 UN COPUOS의 첫 번째 과제중 하나로 부각된 우주공간의 경계획정 문제에 대한 학설상의 견해 및 국가의 입장 그리고 UN COPUOS을 중심으로한 국제사회의 논의 과정에 대해 살펴보고 나름의 평가도 해보았다. 앞서 본 바와 같이 영공과 우주공간을 구분하는데 있어서는 크게 두 가지 입장이 논의되어 왔는데 이는 말하자면 영역구분론자(공간론자, spatialist)와 기능주의자(functionalist)로 구분하여 설명되어질 수 있다. 영역구분론자들은 1967년 우주조약 제2조에서 우주공간의 법적 지위가 국가주권이 배제된 일종의 국제공역(res commercium)인데 반하여, 1944년 시카고 협약 제1조와 국제관습법에 따르면 영공주권을 인정하고 있는 것이 명백하므로 이 두 영역간의 경계는 반드시 획정되어야 한다는 점을 강조하고 있다. 실제로 COPUOS의 과학기술소위원회나 법률소위원회에서 우주의 경계획정 문제를 지난 반세기에 걸쳐 줄곧 논의해 오긴 했으나 우주조약, 손해배상 책임, 우주물체의 등록 등의 이슈외에도 위성직접방송이나 원격탐사, 달 자원 이용 문제 등 다른 의제에 비해 비교적 소홀히 다루어진 감이 없지 않았다. 그러다가 적도국가들에 의해 주창된 보고 타 선언 이후 법적결과를 수반하는 많은 실제적 문제점들이 우주공간의 경계획정과 관련한 논란을 야기 하였고, 이 때문에 우주에 대한 구체적 정의가 더욱 필요하게 되었던 것이다. 그러나 이 과정에서 우주의 개발과 이용이 커다란 진전을 보여왔음에도 불구하고 상당수의 국가들이 뚜렷한 과학적 기준 없이 경계를 결정하는 것은 시기상조라거나 부적절하다는 등 경계획정에 소극적 입장을 보여온 논거들에 있어서 별다른 변화를 보이지 않은 채 50년 이상의 기간동안 논란만 거듭해 왔다. 21세기에 와서도 우주의 정의와 경계획정에 관하여 국가들간의 논의가 계속 되었는데 앞서 본바와 같이 러시아를 위시한 다수의 국가들은 100~110km를 넘지 않는 선에서 협상을 통한 경계협정이 체결되어야 한다는 입장인 반면에 미국이나 영국, 프랑스 등 상당수의 국가들은 아직 분명한 기준없이 결론을 내리는 것은 문제가 있다고 반대하였다. 반대견해의 대표적 국가인 미국은 상기한 구소련의 제안에 대해 한마디로 시기상조이며 적절한 법적, 과학적 분석의 토대위에서 경계선이 결정되어야 한다고 주장하고 있다. 따라서 이 문제의 해결에는 무엇보다도 국제공동체라는 인식을 통해 각 국가의 적극적이면서 평화적인 협력의지가 요구된다고 본다. 이런 관점에서 일찍이 미국의 케네디 대통령이 우주활동에 대한 비전을 제시하였던 '달 연설(Moon Speech)'에서 모든 인류가 우주에서의 평화로운 협력과 공존을 위해 모든 노력을 경주할 것을 촉구하면서 현 상태의 우주활동에서는 분쟁이나 국제갈등이 미미하지만 그것의 위험한 환경은 결코 우리에게 우호적이지 않다는 사실을 강조하였다. 또한 그는 이를 극복하려면 인류는 최선을 다해야 하고 자칫하면 그 평화적인 협력을 위한 소중한 기회가 다시는 오지 않을지도 모른다고 하였던 바 이는 오늘날에도 유효한 시사점을 던져주고 있다. 요컨대 이상의 제 상황 및 지구궤도공간에서 우주활동을 해온 우주물체들에 대해 인정해온 다수의 국가관행을 고려하고 여러 이론과 학설을 통해 자연과학적, 천체물리학적 구획이 매우 어렵다는 사실을 감안한다면 사견으로는 전술한 바와 같이 인공위성의 최저근지점을 기준으로 한 100km 정도의 영공과 우주공간의 경계구분안으로 국제적 합의를 도출해 내도록 전향적 노력을 해나가는 것이 바람직할 것으로 생각된다.

• Journal of Genetic Medicine
• /
• 제8권2호
• /
• pp.89-99
• /
• 2011

유전상담이 왜 국내 의료 현장에서는 필요한 의료서비스로 제공되고 잇지 않은 지에 대한 문제점과 해결책을 모색하고자 미국과 일본에서 유전상담이 필요한 유전 의료 서비스의 일환으로 정착되는 배경과 과정을 비교 고찰하였다. 동시에 국내 유전의료서비스의 현황과 유전상담 서비스 제공에 있어서 장애가 되는 요인들을 고찰하였다. 미국의 경우에는 1970년대 초에 산전 진단이 보편화되면서 유전상담의 수요가 늘게 되어 새로운 직종의 전문 유전상담사를 양성하게 되는 계기가 되었으며, 현재 29개의 양성과정의 교육을 통해서 3,000명에 가까운 전문유전상담사가 배출되어 임상유전 의료팀의 일원으로 임상유전학 전문의의 감독 하에 유전상담을 제공하고 있으며, 21세기 유전의료시대에 요구되는 생명유전정보관리를 위해서 유전상담의 필요성과 그 역할이 확대되고 있다. 일본에서는 정부주도하에 HGP 유전체 연구사업 이후 21세기 유전의료시대의 도래를 준비하는 밀레니엄 프로젝트 차원에서 <유전의료시스템의 구축과 운영> 및 <유전 카운슬링 체제의 구축>을 위한 대규모의 연구단을 구성하여 임상유전 전문의의 제도화와 본격적인 임상유전 전문 분야의 서비스가 의료기관에 개설되는 동시에 비의사를 위한 인정 유전카운슬러의 양성과 자격에 대한 연구를 거쳐서 2003년 7개의 대학원에서 유전상담사 양성 과정이 인정되어 2012년까지 110명의 유전카운슬러 배출을 목표로 현재 100명이 넘는 유전상담사가 인증되었다. 사회적 의료 수요에 부응하는 의학유전 유관학회와 교육기관의 전문가 그룹이 선도한 미국의 유전상담사 양성 프로그램과 정부 주도 하의 시대적 의료 변화에 부응하는 연구에 전문가들의 참여로 체계적인 유전상담 프로그램개발을 정착시킨 일본의 경우, 모두 비의사 유전상담사에 의한 유전상담 서비스에 대한 보험급여 등의 제도적인 보완 없이 선행되었다는 점은 우리에게 시사하는 점이 크다고 본다. 한국의료 현장에서 유전상담 서비스가 시도되지 않는 주 장애요소로는 유전상담에 대한 이해 부족과 무관심, 국내 의료 제도 하에서 의사의 진료 수가가 너무 낮아서 그 결과 외래에서 한 환자의 진료에 할애할 수 있는 시간은 10분을 초가 할 수 없는데, 유전상담 서비스는 장시간이 소요되기 때문이다(최소30분이상). 또한, 건강보험 급여제도에서 '유전상담'을 필요한 의료 행위로 인정하지 않고 있어서 아직 code 조차 생성되어 있지 않기 때문이다. 또한, 무엇보다도 근본적인 요인으로 유전상담 서비스를 제공할 수 있는 임상유전 전문의가 절대 부족하고, 최근까지도 국내 의과대학 교육 curriculum에 유전상담을 실제적으로 이해하고 습득할 기회가 없었기 때문에 일반 의료인에게는 유전상담에 대한 이해 부족과 무관심 등이 유전상담 서비스의 걸림돌로 파악되었다. 그러나, 대한의학유전학회에서 2007년 전문가들을 대상으로 실시한 유전상담과 전문 유전상담사 수요에 대한 전국 조사 연구에서 유전의료 현장과 연구 부분에서 유전상담과 전문 유전상담사가 매우 필요하다는 것이 확인되었다. 또한, 정부는 희귀난치성질환센터 Help Line의 유전질환 정보 제공을 통해서 유전상담을 받을 것을 권고하고 있지만, 실제로 의료 현장에서는 유전상담이 제공되고 있지 않기 때문에, 한국근육장애인협회, 저신장장애인협회, 코헴회등, 유전성환자들로 구성된 국내 자조회 등에서는 유전상담의 필요성을 제기하며, 서비스를 요구해오고 있다. 최근 한국희귀질환재단에서 유전성 희귀질환 환자와 가족들에게 유전상담 교육 강좌를 제공한 후 설문조사에 응한 283명의 81%가 이전에 유전상담에 대해서 접해 본 적이 없었고, 96%에서 유전상담이 희귀난치성질환 환자에게 도움이 될 것이라고 응답했다. 한편, 2009년 실시한 국내 실정에 맞는 유전상담사 양성을 위한 교육 프로그램과 교육기관의 인정 및 전문 자격 인증제도 수립에 대한 연구에서 관련 업무 전문 종사자 총 117명(의사52명, 전문 연구원30명, 간호대학 교수 26명 포함) 중 설문조사에 응한 88%가 대한의학유전학회에서 주관하고 유전상담위원회를 구성하여 교육 프로그램 개발과 인증제도를 구체화 할 것을 촉구하였다. 전문 인력의 양성을 위한 교육 수련 및 인증 프로그램을 개발하고 수행하는 것은 전문학회의 역할인 동시에 "사회적책임"이라고 생각한다. 새로운 분야(신기술)의 전문 임상 인력을 양성하는 데는 시간이 걸리기 때문에(유전상담사의경우, 2년의 대학원 과정과1년의clerkship, 임상수련과정 등으로 적어도 3년) 대한의학유전학회에서는 전문 유전상담사 양성을 위한 선 교육, 후 제도적 보완을 추진하는 것이 바람직한 방향이다. UNESCO에서는 이미 1995년 Report에서 유전상담은 유전자 검사의 보급이 증가하고 있는(21세기 유전의료시대) 의료현장에서 가장 빠르게 성장하고 있는 전문 분야로서 유전정보와 기법을 환자 진료에 연결하는 것을 돕는다고 하였다. 유전상담은 21세기 post-genome의 맞춤의료시대에서 그 역할과 적응범위가 확대되어가는 유전의료서비스의 일환이라는 것을 국내 의료계와 정부 의료 정책 부서에서 인지할 필요가 있다. 특히, 국내 저진료 수가의 의료정책 제도 하에서는 의사가 환자를 위해 충분한 진료시간을 확보하기 힘든데, 비의사전문유전상담사를유전의료팀의일원으로 유전상담에 참여하게 함으로써 환자와 가족들에게 정확한 유전정보에 대한 충분한 이해를 통해서 맞춤 유전 의료 서비스를 원활하고 효율적으로 제공하는데 도움이 될 것이다. 이를 위해서는 국내에서도 종합적인 유전의료 서비스의 구축 사업의 일환으로 유전상담 서비스 공급을 위한 전문 인력(유전상담사포함) 수급에 대한 지원 사업과 유전상담에 대한 건강보험 급여 인정 등 제도적인 뒷받침이 필요하다.

• 한국식품위생안전성학회지
• /
• 제27권4호
• /
• pp.375-387
• /
• 2012

시중에서 유통 중인 환제 31종 93건을 수집하여 유해 중금속 (납, 카드뮴, 비소 및 수은)의 함량을 조사하고 유해성을 평가하였다. 중금속 중 납, 카드뮴, 비소는 Microwave dirgestion system를 이용하여 질산 분해 후 ICP-MS를 사용하였고, 수은은 시료를 수은분석기에 직접 주입하여 측정하였다. 중금속의 위해성 평가는 국제식품첨가물위원회(JECFA)의 잠정주간섭취허용량(PTWI)과 비교하여 %PTWI를 산출하였고 또한 참고섭취량(RfD)과 발암잠재력(SF)을 이용하여 비발암위해도와 발암위해도를 평가하였다. 전체 시료의 중금속의 평균 함량(mg/kg)은 납 0.87, 카드뮴 0.08, 비소 2.87 및 수은 0.16이었고, 재료별 평균 함량(mg/kg)은 표피 0.63, 열매 3.94, 잎 1.42, 뿌리 1.05, 종자 0.16, 해조류 22.31 및 기타 10.17이었다. 납은 전체 시료인 31개 중 28개 시료에서 0.01 mg/kg이상 검출되었으며 카드뮴은 31개 중 24개 시료에서 0.01 mg/kg이상 검출되었고, 비소는 31개 중 29개 시료에서 0.01 mg/kg 이상 검출되었다. 또한 수은은 31개 중 29개 시료에서 0.01 mg/kg 이상 검출되었다. 시료 중 석류환과 칡환은 납의 함량이 높았고, 톳환은 수은의 함량이 높았으며 다시마와 톳환은 비소의 함량이 높았다. 중금속의 위해지수 (비발암위해도)는 표피 0.09, 열매 0.51, 잎 0.33, 뿌리 0.21, 종자 0.02, 해조류 4.84, 기타 0.05이었다. 납의 평균 주간섭취량(${\mu}g$/kg/week)은 0.77로, 국제식품 첨가물위원회(JECFA)의 잠정주간섭취허용량(PTWI) 25의 3.1% 수준이었으며, 납의 초과발암위해도는 표피 $1.95{\times}10^{-7}$, 열매 $1.45{\times}10^{-6}$, 잎 $2.14{\times}10^{-7}$, 뿌리 $6.27{\times}10^{-7}$, 종자 $1.99{\times}10^{-8}$, 해조 $3.61{\times}10^{-7}$, 기타 $9.64{\times}10^{-8}$이었으며, 전체 시료에서는 $4.24{\times}10^{-7}$로 산출되어 평생 동안 섭취할 경우 천만명당 4명의 비율로 암이 발생하는 수준이었다. 카드뮴의 평균 주간섭취량(${\mu}g$/kg/week)은 0.06로 국제식품첨가물위원회(JECFA)의 잠정주간섭취허용량(PTWI) 7과 미국 환경보호청(U.S.EPA)의 참고섭취량(RfD) 0.001 mg/kg/day의 0.9%이었다. 비소의 평균 주간섭취량(${\mu}g$/kg/week)은 2.14이었으나, 비소의 %PTWI는 2010년 비소 독성에 대한 기존의 잠정주간섭취허용량(PTWI)값의 유지가 적절하지 못하다는 국제식품첨가물위원회(JECFA)(140)의 판단 하에 폐지되어 비교할 수 없었고, 미국 환경보호청(U.S.EPA)의 참고섭취량(RfD) 0.3 ${\mu}g$/kg/day을 기준으로 평가하면 참고섭취량(RfD)의 98.3%이었다. 또한 미국 환경보호청(U.S.EPA)의 발암 잠재력(SF)값을 적용하여 시료 중의 비소종이 모두 무기비소일 경우 초과발암위해도를 산출한 결과 표피 $1.54{\times}10^{-5}$, 열매 $7.24{\times}10^{-5}$, 잎 $1.23{\times}10^{-4}$, 뿌리 $2.02{\times}10^{-5}$, 종자 $3.25{\times}10^{-6}$, 해조 $2.18{\times}10^{-3}$, 기타 $5.67{\times}10^{-6}$이었고, 전체 시료에서는 $3.38{\times}10^{-4}$이었으나, 농산물 중의 무기비소 비율 약 23%를 감안하면 $7.78{\times}10^{-5}$이었으며, 비소 함량이 높게 나타난 해조류를 제외한 다른 시료들의 초과발암위해도는 $9.20{\times}10^{-6}$이었다. 수은의 주간 평균섭취량(${\mu}g$/kg/week)은 0.026로 국제식품첨가물위원회(JECFA)의 잠정주간 섭취허용량(PTWI) 5의 0.5%의 수준이었다. 유통 환제에서 중금속의 함량을 분석하고 위해성을 평가한 결과 중금속이 비교적 높게 검출된 일부 시료를 제외하고 대부분의 시료에서 자연 함량의 수준으로 측정되어, 안전한 수준으로 평가되었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.