• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.18 no.1
• /
• pp.42-48
• /
• 2014

• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2014

• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.20 no.4
• /
• pp.15-20
• /
• 2016

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.10-11
• /
• 2014

Energy load of building affected by insulation performance of building's exterior. and insulation system can be classify interior insulation, exterior insulation, sandwich insulation according to install place of insulation. but within interior insulation system, corner wall and the cross outer wall-slab insulation part may occur thermal bridges. And then, within exterior insulation system is more superior insulation performance than interior insulation, but it has difficult to apply, easily broken at high building because of strong wind load. And also difficult to maintenance exterior insulation system. So, in this study, to found requirement performance of cast-in-place sandwich insulation system that is superior insulation performance and easy construction and maintenance. requirement performance of cast-in-place sandwich insulation system is 1) To avoid thermal bridges in the insulation performance, 2) Both sides concrete wall can be composite action in the structural performance. Because of this study, can develops cast-in-place sandwich insulation system and this insulation system contribute to improve insulation performance of apartment-house and high building.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.80-89
• /
• 2016

Recently, the paradigm shift of new construction into efficient operation and maintenance of infrastructure is seen. Also, concerns about infrastructure safety, especially the aged infrastructure, are on the increase. This study evaluates the current status of infrastructure safety and maintenance using data from 1994 to 2014 in Facility Management System operated by Korea Infrastructure Safety Corporation. Also, a quantitative analysis of safety performance of infrastructure is conducted to find out the enhancement of infrastructure safety in Korea. It was found that safety of facilities in Korea have been enhanced for the past decades. Improvement of safety performance of facilities is attributed to periodic safety inspection and repair and reinforcement. The result of the study can be used as a basic material for efficient and effective facility maintenance policies and strategies.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.67-74
• /
• 2016

The primary aim for using a Korean Condition Based Maintenance (CBM) system is to maintain military operational readiness using Interactive Collection Analysis Systems (ICAS) installed on naval vessels. Other aims are to preemptively provision maintenance and supply functions, to guarantee economical management of logistical assets, and to implement data driven equipment life cycle management. In order to accomplish these aims, it is necessary to establish standard system conditions. However, because manufacturers do not provide the technology necessary for maintenance management, it is required to retain component performance maps for each piece of equipment, and to accumulate data about frequently occurring fault patterns. This study confirms the validity of component performance maps using micro gas turbines and provides accumulated data on machine break downs. This would allow real time equipment performance checks and present performance trends. Then analysis would provide solutions for maintaining the best machine operating conditions with detailed maintenance manuals for operators. This study is a basis for further research to investigate additional ways to develop CBM using data obtained from naval vessels used in actual military operations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.632-637
• /
• 2014

In this paper the concept of the performance-based logistics (PBL) support for weapon systems is discussed and an enhancement is studied such that prior to the Operational phase, the development of the PBL can begin from the Engineering & Manufacturing Development (EMD) phase together with multiple performance indices considered. The genetic algorithm should be considered for the complex system to solve the maintenance policy optimization. In particular, the requirement of repair level analysis model is developed based on reflecting the PBL concept. To decide the maintenance policy prior to Operational phase in accordance with customer requirements, the PIDO(Process Integration and Design Optimization) technique useful in choosing the performance indices and changing the constraints was used. The genetic algorithm of PIDO tool, like PIAnO and ModelCenter, was verified that it could be applied to optimize the maintenance policy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.1-11
• /
• 2021

As the aging of large domestic SOC facilities accelerates, facility maintenance is also changing from safety evaluation based on the current condition to performance-oriented preventive and preemptive maintenance based on the prediction of the level of future obsolescence. In particular, in the case of bridges, class 1 and 2 bridges are systematically managed along with many studies, but for small and medium-sized class 3 bridges there is no collection and utilization of historical data presenting performance degradation during their service life. Therefore, in this study, 3D model-based demonstration DB system was designed and developed to intuitively check the damage change rate at the damage location by registering the maintenance history by life cycle for each member's exterior damage in the 3D bridge object and to enable API-based comprehensive performance evaluation.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.31-39
• /
• 2014

PURPOSES : Surface treatment material for pavement preventive maintenance should be inspected field applicability. This study(Part II) aimed to checkup coating characteristics and performance analysis using lab and field tests. The hydrophobic - low viscosity filling material for pavement preventive maintenance is presented in Part I, which is a series of companion study. METHODS : Relative comparison between general asphalt mixtures and surface treatment asphalt mixtures are analyzed and measured for the field application such as indirect tensile strength ratio(TSR), abrasion resistance, crack propagation resistance, temperature resistance, coating thickness, permeability resistance and skid resistance in terms of british pendulum number(BPN). RESULTS : It is found that TSR, crack propagation resistance and permeability resistance is increased as against uncoated asphalt specimen. Abrasion resistance and temperature resistance is secured from the initial coating thickness point of view, which is about 0.2~0.3mm. Skid resistance on the surface treatment pavement is satisfied with the BPN criteria of national highway because of exposed aggregate and crack sill induced pavement deterioration and damage cracks. CONCLUSIONS : The hydrophobic - low viscosity surface treatment material for pavement preventive maintenance is validated on field applicability evaluation based on quantitative analysis of coating thickness and performance analysis using lab and field tests.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2020

In this paper, a predictive maintenance of the robot trouble using the machine learning method, so called MT(Mahalanobis Taguchi), was studied. Especially, 'MD(Mahalanobis Distance)' was used to compare the robot arm motion difference between before the maintenance(bearing change) and after the maintenance. 6-axies vibration sensor was used to detect the vibration sensing during the motion of the robot arm. The results of the comparison, MD value of the arm motions of the after the maintenance(bearing change) was much lower and stable compared to MD value of the arm motions of the before the maintenance. MD value well distinguished the fine difference of the arm vibration of the robot. The superior performance of the MT method applied to the prediction of the robot trouble was verified by this experiments.