• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1371-1376
• /
• 2003

In the thermal power plant, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, Strictly maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature, the change of the dynamic characteristics in the reheater. Up to the present time, PID Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on tuning of the 2-DOF PID Controller on the DCS for steam temperature control using immune based multiobjective approach. The stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Therefore tuning technique of multiobjective based on immune network algorithms in this paper can be used effectively in tuning 2-DOF PID controllers.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.275-283
• /
• 2007

This study aims at the calculation of a variation of flow characteristics of main channel for tributary inflow in river junction. So this study was analyzed the variation of flow depth and velocity in main channel for a change of inflow degree. For this purpose, FLDWAV model are carried out for variations of $30^{\circ}$, $60^{\circ}$ and $90^{\circ}$ tributary inflow at junction. Results show that velocity ratio(V1/V3) increases and flow depth ratio(H1/H3) decreases for discharge ratio(Q1/Q3) of upstream and downstream when degree increases in junction. And FLDWAV model was applied at a real river junctions. Selected area is a junction of Gumho river and Sin stream. Results show that pattern is similar to a virtual channel.

• Water for future
• /
• v.16 no.4
• /
• pp.237-243
• /
• 1983

This study examines the dilution-dispersion phenomen in the main stream when a polluted branch stream flows into it. A hydraulic model was used for it. As the discharge of the main stream and the branch one were changing, the qualitative dispersion, the stream regimen, the velocity of the flow and the hydraulic properties were observed. It was found that the faster the velocity was and the greater the flow discharge ratio was, the more dilution-dispersion phenomenon occurred. And as the velocity of the flow was increasing, so was the longitudinal dispersion velocity. But the transverse dispersion velocity was relatively reduced. Therefore, it is concluded that the dispersion by the distribution of velocity is increased.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.59
• /
• pp.181-205
• /
• 2013

This study has analyzed the international trade flow of medical devices in Korea, China, and U.S. more theoretically and systematically through a mutual connection of the medical device export structure of Korea and the import structure of China and U.S. organically, with an intensity approach on the bilateral international trade flow. Also, it is meaningful to find a solution to boost exports of Korea to China and U.S.. Therefore in this study, we recognize the importance of the medical device market in China and U.S., which is the main competition for Korea and its market, and look into the trade situation of these three countries. We also look into the relative market stream and the trade intensity of the main medical devices in Korea, China and U.S., and seek measures for the steady growth of the medical device market in these three countries.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.1-7
• /
• 2005

This paper deals with the design and aerodynamic analysis of a special-type impulse turbine, with an end plate for wave energy conversion. Numerical analysis was performed using a CFD code, FLUENT. The main idea of the proposed end plate was to minimize the adverse effect of tip clearance of turbine blade, and was borrowed from ducted propeller, with so-called penetrating end plate for special purpose marine vehicles. Results show that efficiency increases up to $5\%$, depending on the flow coefficient; a higher flow coefficient yields increased efficiency. Decrease of input coefficient CAwith an end plate is the main reason for higher efficiency. Performance of end plate at various design parameters, as well as flow conditions, was investigated; the advantages and disadvantages of the presentimpulse turbine were also discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.25-28
• /
• 2008

An aerodynamic calculation in hover of KUH main rotor blade is performed using a three-dimensional unstructured hybrid mesh viscous flow solver. The flow solver utilizes a vertex-centered finite-volume scheme that is based on the Roe's flux-difference splitting with an implicit Jacobi/Gauss-Seidel time integration. The eddy viscosity are estimated by the Spalart-Allmaras one-equation turbulence model. A solution-adaptive mesh refinement technique is used for efficient capturing of the tip vortex. Calculations are performed at several operating conditions with varying collective pitch setting for KUH main rotor blade in hover. Good agreements are obtained between the present and other results using HOST and CAMRAD II in overall rotor performance. It is demonstrated that the present vertex-centered flow solver is an efficient and accurate tool for the assessment of rotor performance in hover.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.113-121
• /
• 2012

The study was carried out to investigate the dimension of irrigation canal, and measure the water flow of those diverted from Kimje main canal in Dongjin irrigation area. The rating curves indicating the relationships between water level and discharge of the lateral canals were induced using the measured data with high regression coefficients of 0.957~0.999 at inlet points and 0.932~0.998 at end points, respectively. And Manning's roughness coefficients were estimated as the ranged from 0.015 to 0.074 at inlet points and 0.056 to 0.089 at end points with rectangular type of concrete open irrigation canals, the Manning's roughness coefficients of the end points were less than those values of the end points, which may be considered as the deposition of the bottom sediments.

• International Journal of Computer Science & Network Security
• /
• v.22 no.2
• /
• pp.413-423
• /
• 2022

The NHIS provides free or highly subsidized healthcare to all people by providing financial fortification. However, the financial sustainability of the scheme is threatened by numerous factors. Therefore, this work sought to provide a solution to process claims intelligently. The provided Petri net model demonstrated successful data flow among the various participant. For efficiency, scalability, and performance two main subsystems were modelled and integrated - data input and claims processing subsystems. We provided smart claims processing algorithm that has a simple and efficient error detection method. The complexity of the main algorithm is good but that of the error detection is excellent when compared to literature. Performance indicates that the model output is reachable from input and the token delivery rate is promising.

• Journal of TMJ Balancing Medicine
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2011

Objectives: TMJ is the joint that connects the mandible to the skull, and it balances the body by holding the skull in the right position. The Meridian flows through the whole body. The objective of this study is to examine and clarify the relationship between the Temporomandibular Joint (TMJ) and the Meridian flow, especially around the TMJ. Methods: We reviewed the literature on the 8 Extra Meridians and the 12 Main Meridians around the TMJ. Results & Conclusion: Eight Extra Meridians keep the balance and harmony of the TMJ, and also play an important role in maintaining equilibrium of Yin and Yang of the whole body. The 12 Main Meridians, twelve Meridian Divergence (12經別) and Meridian Sinew also play an important role in the balance and harmony of the whole body based on the function of the Vicera and Bowels (臟腑). So it is conceivable that the role of TMJ is important in terms of health care.

• Journal of ILASS-Korea
• /
• v.8 no.2
• /
• pp.16-23
• /
• 2003

The Air-jet loom represents a major step in the development of shutterless weaving due to its ability to weave a wide range of yarns at high speeds. The Air-jet weaving involvers, inserting a pre-measured length of yam through the wrap, is sheds by meads of compressed air. The analysis of air flow characteristic of the main nozzle and acceleration tube is required for the loom performance. h this paper We examined the effect of the main nozzle with different acceleration tubes as well as diameters. And also, we compared the performance of straight type tube with laval type tube and of according to be suction hole on the acceleration tube, respectively.