• The Plant Pathology Journal
• /
• 제24권3호
• /
• pp.337-351
• /
• 2008

Host-pathogen interaction in rice bacterial blight pathosystem was analyzed for a better understanding of their relationship and recognition of stable pathogenicity among the populations of Xanthomonas oryzae pv. oryzae. A total number of 52 bacterial strains isolated from diseased leaf samples collected from 12 rice growing states and one Union Territory of India, were inoculated on 16 rice varieties, each possessing known genes for resistance. Analysis of variance revealed that the host genotypes(G) accounted for largest(78.4%) proportion of the total sum of squares(SS), followed by 16.5% due to the pathogen isolates(I) and 5.1% due to the $I{\times}G$ interactions. Application of the Additive Main effects and Multiplicative Interaction(AMMI) model revealed that the first two interaction principal component axes(IPCA) accounted for 66.8% and 21.5% of the interaction SS, respectively. The biplot generated using the isolate and genotypic scores of the first two IPCAs revealed groups of host genotypes and pathogen isolates falling into four sectors. A group of five isolates with high virulence, high absolute IPCA-1 scores, moderate IPCA-2 scores, low AMMI stability index '$D_i$' values and minimal deviations from additive main effects displayed in AMMI biplot as well as response plot, were identified as possessing stable pathogenicity across 16 host genotypes. The largest group of 27 isolates with low virulence, small IPCA-1 as well as IPCA-2 scores, low $D_i$ values and minimal deviations from additive main effect predictions, possessed stable pathogenicity for low virulence. The AMMI analysis and biplot display facilitated in a better understanding of the host-pathogen interaction, adaptability of pathogen isolates to specific host genotypes, identification of isolates showing stable pathogenicity and most discriminating host genotypes, which could be useful in location specific breeding programs aiming at deployment of resistant host genotypes in bacterial blight disease control strategies.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.513-520
• /
• 2004

A steady-state/transient performance simulation model was newly developed for the propulsion system of the CRW (Canard Rotor Wing) type UAV (Unmanned Aerial Vehicle) during flight mode transition. The CRW type UAV has a new concept RPV (Remotely Piloted Vehicle) which can fly at two flight modes such as the take-off/landing and low speed forward flight mode using the rotary wing driven by engine bypass exhaust gas and the high speed forward flight mode using the stopped wing and main engine thrust. The propulsion system of the CRW type UAV consists of the main engine system and the duct system. The flight vehicle may generally select a proper type and specific engine with acceptable thrust level to meet the flight mission in the propulsion system design phase. In this study, a turbojet engine with one spool was selected by decision of the vehicle system designer, and the duct system is composed of main duct, rotor duct, master valve, rotor tip-jet nozzles, and variable area main nozzle. In order to establish the safe flight mode transition region of the propulsion system, steady-state and transient performance simulation should be needed. Using this simulation model, the optimal fuel flow schedules were obtained to keep the proper surge margin and the turbine inlet temperature limitation through steady-state and transient performance estimation. Furthermore, these analysis results will be used to the control optimization of the propulsion system, later. In the transient performance model, ICV (Inter-Component Volume) model was used. The performance analysis using the developed models was performed at various flight conditions and fuel flow schedules, and these results could set the safe flight mode transition region to satisfy the turbine inlet temperature overshoot limitation as well as the compressor surge margin. Because the engine performance simulation results without the duct system were well agreed with the engine manufacturer's data and the analysis results using a commercial program, it was confirmed that the validity of the proposed performance model was verified. However, the propulsion system performance model including the duct system will be compared with experimental measuring data, later.

• 무역학회지
• /
• 제42권1호
• /
• pp.1-25
• /
• 2017

본 논문에서는 계층화 분석법(AHP)을 활용하여 중국진출 중소·벤처기업의 경영위험요인의 중요도와 우선순위에 대하여 분석하였다. 분석 결과를 보면 제조기업의 경영위험요인의 중요도는 인건비 상승, 치열한 시장경쟁, 인사관리 문제, 재료비 상승 순으로 나타났다. 제조품목별 분석결과를 보면, 전자제품의 경우는 인건비 상승과 더불어 조세정책 변화가 주요요인으로, 화학제품은 환경보호법 강화가 중요한 요인으로, 자동차부품의 경우에는 인건비 상승외에 재료비 상승 또한 주요 위험관리요인으로 분석되었다. 중국 진출시기별로는 1990년대 진출한 기업은 치열한 시장경쟁 및 조세정책 변화가 주요 위험요인으로, 2000년대 진출한 기업의 경우 재료비 상승 등이 인건비 상승 외에 중요한 관리요인으로 분석되었다.

• 정보처리학회논문지D
• /
• 제12D권5호
• /
• pp.689-698
• /
• 2005

현재 위치기반 서비스를 제공하기 위하여 다양한 시스템들이 사용되고 있다. 그러나 기존의 시스템들은 상당히 많은 사용자들에게 빠른 서비스를 제공하기에는 적합하지가 않다. 이러한 문제점을 해결하기 위하여 빠른 데이터 처리와 대용량의 데이터 관리를 동시에 지원하는 다중레벨 DBMS를 사용하여야 한다. 스냅샷을 갖는 다중레벨 DBMS는 디스크에 모든 데이터를 가지고 있으며, 빠른 처리를 요구하는 데이터는 스냅샷의 형태로 메인메모리 데이터베이스에서 관리한다. 이 시스템의 성능을 최적화하여 위치기반 서비스를 제공하기 위해서는 스냅샷에 존재하는 데이터를 효율적으로 사용할 수 있도록 질의를 분류하는 컴포넌트가 필요하다. 본 논문에서는 위치기반 서비스를 위한 다중레벨 DBMS에서 질의 분류 컴포넌트를 설계하고 구현한다. 제안된 컴포넌트는 입력된 질의를 메모리 질의, 디스크 질의, 하이브리드 질의로 분류하여 스냅샷 사용율을 높이고, 스냅샷의 일부분을 사용할 수 있도록 질의의 비공간과 공간 필터 조건을 분할하는 메커니즘을 사용하였다. 따라서, 제안된 컴포넌트는 효율적인 질의 분류를 통하여 스냅샷을 최대한 이용함으로써 시스템의 성능을 향상시킨다.

• Ecology and Resilient Infrastructure
• /
• 제2권1호
• /
• pp.22-32
• /
• 2015

본 연구는 하천에서 격리된 구하도와 본류에서 어류 군집 구조의 차이를 비교하기 위하여, 만경강에서 2곳의 본류와 단절된 구하도를 선정하여 환경 요인과 어류 군집 구조를 조사하였다. 측정된 환경 자료를 이용하여 주요인분석을 실시한 결과, 구하도는 하상이 주로 진흙과 모래로 이루어졌고 식생 피도가 높은 반면 본류는 수로 폭이 넓고 하상이 왕자갈, 잔돌, 호박돌 등 다양한 하상구조를 보였고 용존산소 및 전기전도도가 높게 나타났다. 어류 자료를 사용하여 군집분석 결과, 구하도 군집과 본류 군집으로 뚜렷이 구분되었다. 구하도는 호소 및 소하천에 서식하는 어류 군집 구조가 나타났고, 본류는 강과 같은 대형하천에 서식하는 어류군집 구조를 나타냈다. 비모수다차원척도법 결과에 의하면 구하도에 분포하는 어류는 식생 피도와 높은 양의 상관관계를 가진 반면 본류에 분포한 어류는 용존산소, 전기전도도와 높은 상관관계를 보였다. 본 연구 결과, 구하도는 본류와의 연결성이 단절되면서 본류와 비교할 때 어류 서식 환경이 완전히 달라짐으로써 어류 군집 구조가 큰 차이를 보이고 어류의 산란처 및 은신처 기능도 상실한 것으로 판단되었다. 따라서 하천의 어류 생물다양성 증진을 위하여 구하도의 횡적 연결성을 복원하기 위한 노력이 필요하다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• 간호행정학회지
• /
• 제14권1호
• /
• pp.51-62
• /
• 2008

Purpose: Integrated curriculum has been considered as a desirable method in health related school course. The present study was conducted to develop practice curriculum which integrates nursing management and community health nursing and measure the education effect. Method: Literature review and scores of professional meeting were carried out to generate main educational goals, contents, operating principle, and evaluation item. Student evaluation was done by survey and in-dept interview in right after practicum and three months respectively. Results: Six concepts were derived as main component of the integrated curriculum. From 2 to 3 sub-categories were matched to each main component as well. Subsequently, practice contents were suggested on the basis of sub-categories. Attainment of practicum goal scores ranged from 2.82 to 3.54 in four points index. Students expressed that they found nursing manager's role in the community setting. Conclusion: This new approach encouraged students to ascertain relationship between hospital oriented and community based practice. Additionally, they can be prepared to comprehend diverse health care environment.

• 정보보호학회논문지
• /
• 제26권6호
• /
• pp.1461-1470
• /
• 2016

부채널 분석에서 신호처리 기법은 차원 압축이나 잡음 제거를 통해 분석의 효율성과 성능을 높일 수 있는 전처리 기법이다. 특이값 분해를 이용한 신호처리 방법은 신호의 분산 정보나 경향성 등을 이용하여 주 신호 정보를 높이고 잡음신호를 낮출 수 있어, 분석 성능 향상에 큰 도움이 된다. 대표적인 기법은 주성분분석과 선형판별분석 그리고 Singular Spectrum Analysis(SSA)가 있다. 주성분분석과 선형판별분석은 주 신호의 정보를 집약하여 차원 압축을 할 수 있으며, SSA는 본 신호를 주 신호와 잡음 신호로 분해하여 잡음 제거가 가능하다. 세 가지 기법 각각을 사용하거나 조합하여 사용할 경우 성능적인 측면을 비교할 필요가 있으며, 그에 대한 방법론이 필요하다. 본 논문에서는 세 기법을 개별적으로 사용할 경우와 조합하여 사용할 경우의 성능을 비교 분석하였으며, 신호 대 잡음비를 이용한 비교분석 방법론을 제시하였다. 제시한 방법론과 다양한 비교분석 실험을 통해 각 기법의 성능과 효율성을 확인하였다. 이로 인해 부채널 분석 분야의 많은 연구자들에게 유용한 정보를 제공할 것이다.

• 혜화의학회지
• /
• 제23권1호
• /
• pp.21-55
• /
• 2014

Objectives : This report describes the original references of 154 formulas related to the use of Rhei Rhizoma main blended from Dongeuibogam. Methods : This study analyzes the original references of 154 formulas including Rhei Rhizoma as a key component in Dongeuibogam. Results : There were five types as follows: 1.There is no exact match between 154 formulas in Dongeuibogam and the original formulas in references. 2. Case that could not found the original formula in reference: 22%. 3. Case that the citation is the similar to the original reference: 4%. 4. Case that the citation is not same to expression but contents basically: 73%. 5. Case of addition of content: 1% Conclusions : Most formulas related to the use of Rhei Rhizoma main blended from Dongeuibogam are similar to the contents in the original references. But we can find that Heo Jun, who writes Dongeuibogam, modifies the contents for his intention of editing, idea and situation in Korea.

• International Journal of Aerospace System Engineering
• /
• 제4권1호
• /
• pp.13-21
• /
• 2017

In this paper, we present some results on performance analysis for flap actuation system of aircraft. For this, by utilizing MATLAB/Simulink solution, which is widely used physical model-based design tool, we particularly construct the architecture of the analysis model consisting of the main three phases: 1)commanding and outer-controlling the flap angle through flight control computer; 2)generating hydraulic/mechanical power through control module and power drive unit; 3)transmitting torque and actuating the flap through torque tube and rotary geared actuators. For mimicking the motion of the actual flap, we apply each mechanical component, which is already being used in actual aircraft, to our performance analysis model so that it guarantees the congruency of the simulation results. That is, we reflect the actual specifications of flap hardware and software as parameters of the model. Finally, simulation results are presented to illustrate the model.