• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.231-237
• /
• 2012

오미자 씨 오일의 화장품 소재로서 가능성을 평가하기 위해 GC와 GC/MSD를 사용하여 안정성 평가 및 성분 분석을 실시하였다. 그 결과 주요성분은 팔미틱산과 올레익산으로 나타났다. 오미자 씨 오일은 열에 의한 성분변화가 없고, 소재 자체의 안정성이 뛰어난 것으로 나타났다. 또한, DPPH(1,1-Diphenyl-2-picrylhydrazyl) 라디칼 소거능 실험을 통하여 항산화 효능을 측정한 결과 오미자 씨 오일이 마카다미아 오일과 올리브 오일에 비하여 높은 항산화 효능을 나타내었다. 콜라겐 합성능 또한 뛰어난 것으로 평가되었다. 따라서, 오미자 씨 오일은 화장품 소재용으로 유용하게 활용될 수 있는 가능성을 가진 것으로 평가되었다.

• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1127-1133
• /
• 2007

Antihyperlipidemic and antihyperglycemic effects of Red Ginseng (RG, steamed and dried root of Panax ginseng C.A.Meyer, family Araliaceae), major component of which is ginsenoside Rg3, and Bifidodoterium-fermented RG (FRG), major component of which is ginsenoside Rh2, were investigated. Orally administered RG and FRG potently reduced the serum triglyceride levels in com-oil-induced hypertriglycemidemic mice as well as total cholesterol and triglyceride levels in Triton WR-1339-induced hyperlipidemic mice. Of the saponin and polysaccharide fractions of RG and FRG, the polysaccharide fraction inhibited postprandial blood glucose elevation of maltose- or starch-loaded mice and reduced the blood triglyceride levels in com-oil-induced hypertriglycemidemic mice. The saponin fraction and its ginsenosides Rg3 and Rh2 reduced blood triglyceride and total cholesterol levels in Triton WR1339-induced hyperlipidemic mice. The inhibitory effect of FRG and its main constituents against hyperlipidemia and hyperglycemia in mice were more potent than those of RG. These findings suggest that hypolipidemic and hypoglycemic effects of RG can be enforced by Bifidus fermentation and FRG may improve hyperlipidemia and hyperglycemia.

• 농약과학회지
• /
• 제13권3호
• /
• pp.177-184
• /
• 2009

동충하초 포자 현탁액을 누에에 경피 접종하고 발병경과를 관찰하여 누에의 형태적 변화와 균사체 형성 번데기의 형태 및 성분변화를 조사하였다. 누에 유충 때 발병 치사된 누에는 불완전세대를 거쳐 분생포자를 형성하고 번데기 때 병사한 번데기는 균사체를 형성하고 자낭포자를 생산하는 완전 세대의 동충하초가 되었다. 발병하지 않은 건강한 번데기와 균사체 형성 번데기의 성분변화는 유리아미노산, 구성아미노산, 지방산, 핵산물질, 모두 차이가 있었다.

• 물과 미래
• /
• 제14권1호
• /
• pp.51-58
• /
• 1981

본 연구는 하천일류량을 추계학적으로 분석하여 그 특성을 구명하고 이에 적합한 모의발생 모델을 설정하여 검토하는데 목적을 두고 있다. 한강, 낙동강 및 금강유역의 주요관측지점의 일류량으로부터 통계학적 특성인 Correlogram 및 Spectrum 분석에 의한 시계별 특성을 구하였으며 모의발생모델의 결정에 위해 Markov 모델의 Correlogram을 원자료의 그것과 비교한 결과에 따라 모의 발생 모델의 적합도를 예측할 수 있었으며, 또한 다차수모델의 결정계수 R$$에 대한 해석으로부터 다차수 모델의 차수를 결정했으며, 모의발생에 있어서는 수정 Markov 모델과 다차수 모델을 적용한 결과 대체적으로 2차 수정 Markov 모델과 2차 다차수모델이 최적의 결과를 보여주었다.

• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.41-49
• /
• 2006

Precast concrete apartments were main stream of domestic industrialized housing around 90's, and Steel Houses applying Steel Stud technique with light weighted steel have been dominant portion since 1995. On the other hand, various building techniques including Steel Stud method and highly prefabricated and industrialized Unit method are prevailing in developed countries like Japan. Steel stud and unit box have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the open system basis. In this study, the design standard for unit house will be established coping with the established preparing standard for design specifications defined by architectural law and promotion law of housing construction. That is for design standard of industrialized private housing on the open system basis. This study attempts to propose the design automation, with the method of unit construction of which the rate of pre-fabrication is the biggest, that can cope with the demand of user on the basis of open-system. Ticky-tacky is the biggest technical problem in suppling industrialization housing. Therefore, we will suggest a basic plan for design automation of unit modular housing which can raise the productivity of industrialization housing by applying open system, utilized by DB of component and unit, and solve the problem concerned about ticky-tacky.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.64-69
• /
• 2012

Dissimilar friction welds were produced using 15-mm diameter solid bars of chrome molybdenum steel (KS SCM440) and carbon steel (KS SM20C) to investigate their mechanical properties. The main friction welding parameters were selected to ensure good quality welds on the basis of visual examination, tensile tests, Vickers hardness surveys of the bond area and HAZ, and macro-structure investigations. The specimens were tested as-welded and post-weld heat treated (PWHT). The tensile strength of the friction welded steel bars was increased to 100% of the SM20C base metal under the condition of a heating time of more than four seconds. Optimal welding conditions were n = 2,000 (rpm), HP = 60 (MPa), UP = 100 (MPa), HT = 5 (s),and UT = 5 (s), when the total upset length was 7.8 (mm). The hardness distribution peak of the friction welded joints could be eliminated using PWHT. The two different kinds of materials were strongly mixed to show a well-combined structure of macro-particles, with no molten material, particle growth, or defects.

• 전기의세계
• /
• 제24권1호
• /
• pp.75-85
• /
• 1975

In order to develop the commercial frequency (60Hz) plasma torch of small capacity for material cutting, welding and other industrial heating, the A.C plasma jet generator of non-transfered type is made domestically and the electrode configurations of plasma torch are composed of two kinds of electrodes W-C and W-Cu, combined by thermal emission and field emission electrode materials. In this paper, the characteristics of input power, thermal efficiency, electrode consumption, the flame and forms of arc voltage and arc current for A.C plasma torch are investigated in relation to such variables as arc current, argon flow and magnetic field intensity to obtain the basic design data necessary to A.C plasma jet generator. The result are as follows; (1)The input power, thermal efficiency and electrode consumption are influenced greatly by argon flow, magnetic field intensity and nozzle materials. (2)A.C arc voltage and current are non-symmetrial, involving D.C Component. Due to this current of D.C Component, transformer core is saturated and a large abnormal current flows into the primary winding coil. In order to prevent this abnormal current flow, a condenser must be connected in series to the main discharge circuit. (3)The stability and sharpness of jet flame are improved more in the torch of W-C electrode configuration than in the torch of W-Cu electrode configuration.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1018-1026
• /
• 2005

The proton exchange membrane (PEM) fuel cell system consisting of stack and balance of plant (BOP) was modeled in a MATLAB/Simulink environment. High-pressure operating (compressor type) and low-pressure operating (air blower type) fuel cell systems were con­sidered. The effects of two main operating parameters (humidity and the pressure of the supplied gas) on the power distribution characteristics of BOP and the net system efficiency of the two systems mentioned above were compared and discussed. The simulation determines an optimum condition regarding parameters such as the cathode air pressure and the relative humidity for maximum net system efficiency for the operating fuel cell systems. This study contributes to get a basic insight into the fuel cell stack and BOP component sizing. Further research using muli­object variable optimization packages and the approach developed by this study can effectively contribute to an operating strategy for the practical use of fuel cell systems for vehicles.

• 한국전자거래학회지
• /
• 제7권1호
• /
• pp.129-140
• /
• 2002

To succeed in ERP construction, the purpose of ERP setup must be completed. To accomplish this end, it is required to analysis business process completely and make a plan in detail. For ERP providers', they must support a characterized ERP construction methodology and lower the construction cost by improving an ERP package by making it easy to customize. But, because imported EHP products that are supplied currently are designed for the standard and the rationality, they have a limit to support custom processes of domestic companies. On the contrary, ERP products by domestic companies are unable to support a consistent methodology of constructing ERP system. This is a main reason why much time and costs are consumed than that of an original plan. For solving the problems, ERP packages should provide a consistent process modeling methodology and a modeling tool which can support this methodology. Furthermore, customizing cost must be lowered by implementing reusable components from the process models. This Paper describes a component-based ERP Package system which has peculiar modeling tools and development tools. We describe the modeling methodology and the business component definition of the ERP system. Finally, we describe its customizing process based on these process designs and business components.

• 전자공학회논문지CI
• /
• 제39권2호
• /
• pp.10-20
• /
• 2002

여러 가지의 독립성분분석 및 암묵신호분리 알고리즘들이 개발되었지만, 아직 이러한 알고리즘들의 성능비교가 철저히 이루어지지는 못 하였다. 이 논문은 이 알고리즘들 중에서 뛰어난 알고리즘들을 센서 잡음에 대한 강인성, 계산 복잡도, 혼합 행렬의 조건, 센서 수, 학습패턴 수 등 여러 측면에서 비교한다. 또한, 알고리즘들의 성능 비교에 유용한 문제들도 제시한다. 이 비교결과는 이 알고리즘들의 EEG/MEG 분석, 음성신호분리 등과 같은 실질적 응용에 큰 도움이 될 것이다.