• Tuberculosis and Respiratory Diseases
• /
• v.48 no.4
• /
• pp.420-427
• /
• 2000

Background : Isolated leukopenia is rare, but it has important clinical implications during antituberculosis treatment. Inadvertent discontinuation of short-course regimen drugs for fear of leukopenia inevitably will extend the duration of treatment, and the completion of treatment will be delayed. However no guidelines concerning proper management for leukopenia during antituberculosis treatment have been presented. Therefore, this study was performed to evaluate the possibility of continuing the same short-course regimen if a mild-to-moderate degree of isolated leukopenia was to develop during antituberculosis treatment. Method : Thirty-six patients who had been prescribed a short-course antituberculosis regimen between January 1997 and August 1999, had newly developed, mild-to-moderate degree, isolated leukopenia during medication, and had continued the same drug regimen despite leukopenia were enrolled. One patient was not available for the follow-up, so the remaining thirty-five (twenty-five prospectively and ten retrospectively) patients were analyzed. Patients who had other known causes of leukopenia were excluded. A mild-to-moderate degree of isolated leukopenia was arbitrarily defined as having a peripheral blood leukocyte count between 2,000 and $3,499/mm^3$ and no evidence of coexisting hematologic abnormalities. Results : 1) All thirty-five patients were able to complete short-course anti-tuberculosis treatment without complication or further decrease of leukocytes count to less than $2,000/mm^3$ despite continuous treatment with the same regimen. 2) The mean duration from start of antitituberculosis medication to detection of leukopenia was $64{\pm}65$ days. 3) The mean leukocyte count was $5,035{\pm}1,583/mm^3$ before treatment, and the its lowest count was $2,908{\pm}390/mm^3$ during treatment. Leukopenia recovered after completion of treatment ($4,283{\pm}1,269/mm^3$). 4) The main component of leukopenia was the decrease in neutrophil count ($3,361{\pm}1,732$ vs. $1,512{\pm}423/mm^3$, p<0.05). Conclusion : For mild-to-moderate degree of isolated leukopenia ($2,000/mm^3{\leq}$ WBC < $3,500/mm^3$), developing during short-course antituberculosis treatment, the short-course antituberculosis regimen may be continued without complications.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.449-460
• /
• 2013

This study analyzes the processes of change in oral health behaviors induced by oral health education for 23 university students. To this end, we analyzed the changing patterns of the stages of change and motivational components for each oral health behavior. Additionally, we performed an in-depth interview-based investigation of the factors influencing such motivational components. Oral health education was performed twice with a concrete purpose of changing the participants' behaviors in complying with the practice of proper brushing and flossing as the main oral health management, and checking the nutrient facts as a good dietary habit. Upon completion of these two sessions of oral health education, the level of change in oral health behavior was assessed by measuring the stages of change and motivational components for each oral health behavior. In order to gain an in-depth understanding of the reasons for the changes that were demonstrated more markedly during the second education session than during the first session, collective interview surveys were carried out after the second session. The contents of the recorded interviews were categorized into subscales of distinctive concepts on the basis of the items of a health behavior model. The study had the findings as below. First, after the first and second education sessions, some behaviors showed positive changes from lower to higher levels of practice. Second, self-efficacy about oral health behavior was high or perceived barriers were low when its necessity and benefits were clearly perceived. Third, educational features such as the practice and participation-centered education, and examining their own oral conditions influenced the participants' oral health awareness and behavioral changes. There is a need for oral health education capable of leading to practical behavioral changes by establishing concrete strategies of deriving various motivational components at each stage of the processes of change.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.365-371
• /
• 2013

The organic acids, fuel oil contents and antioxidant activities of Yakju with the addition of rice varieties were investigated. The rice cultivars that were used in this study were Ilmi rice, Hopyung rice, Hopum rice, Hanarum rice, Anda rice and Indica rice. The study results are as follows: the pH values of Ilmi Yakju and Hanarum Yakju were 4.14 and 4.07, respectively, and those of the other Yakjus, 3.92~3.98. The total titratable acid content of the Yakju for which Indica rice was imported from Thailand was highest among the samples. The reducing sugars content of the Yakju for which Indica rice was used was higher than that of the other samples. The ethanol content of the Hanarum Yakju was higher than that of the other Yakjus, and the lowest ethanol content was found for the Indica Yakju. The major organic acid component of the Yakju was lactic acid. The total organic acid content was highest in the Indica rice Yakju. The amounts of the following main fusel oils were highest, in the following order: 2-butyl alcohol, 2-pentanol, N-propyl alcohol, acetaldehyde, ethyl acetate, methyl alcohol and 2-methyl-1-propyl alcohol. The DPPH free radical scavenging activity of the Indica rice Yakju was much higher than that of the Ilmi rice Yakju and the Hanarum rice Yakju. Also, the SOD activity of the Indica rice Yakju was strongest among all the samples. The total polyphenol content of the Indica rice Yakju was the highest among all the samples.

• 보존과학연구
• /
• s.17
• /
• pp.161-182
• /
• 1996

In natural atmosphere, copper and copper alloy have been used to make buddha statues and ornaments of historic buildings since the abovementioned metals have corrosion resistance in some extent, and the patinaformed on the surface of the metals has provided the people aesthetic satisfaction with its beauty. But in atmosphere polluted by $SO_x$and $NO_x$, the patina layer does not work as a protective film, and it allows damages of the metal. Since 1992, Tokyo National Research Institute of Cultural Properties(TNRICP)has conducted studies on the influence of atmospheric pollution on metal cultural property held under open air. The Great Buddha Image which is located in Kamakura about 50km west from Tokyo, has been selected as one of the objects to study because it is made by copper alloy and it has stood exposed in the air for about a few hundreds years. Furthermore it is also the reason to study on it that there are many cultural properties in the surroundings of it. We have analysed the components and the structure of the corrosion products formed on the surface of the Buddha, have carried out exposure tests using the alloy samples which have simulated the components of the Great Image, and have observed climated and polluted air in order to discuss the relation between corrosion of metals in open air and conditions of the atmosphere. In this paper, the authors have described the components and the structure of the corrosion product formed on the surface of the Great Image by means of X-ray fluorescence spectroscopy and X-ray diffraction. The conclusions are as follows. (1) Sulfate patina composed mainly with brochantite were detected on the all sides of the Image and the amount of the patina is found more on the back of the Image facing to north. (2) Antlerite were detected on the back and a park of the left side facing to west, and formation of it was considered to have close relation with malignant atmosphere. (3) A big amount of chloride patina which mainly composed of atacamite were observed on the front facing to south. (4) Carbonate patina mainly composed of malachite were detected on the area where brochantite was often detected as well. It suggested that malachite had been transformed into brochantite by deteriorated atmosphere. (5) On the all sides of the Image, patina were observed together with copper oxides mainly composed of cuprous oxide. It showed that the surface layer of the Image consists of two layers : inner layer of oxide and outer layer of patina. (6) Corrosion products of lead which was a component of copperalloy were detected on the all sides : the main lead product found on the front was chlorophosphate whereas the one on the back was sulfate.

• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.709-716
• /
• 1998

Three kinds of anti-complementary system and macrophage activating polysaccharides, AB-20-Ia, AB-20-IIa-2a and AB-20-IVa-2 were isolated from the fruit body of Agaricus bisporus and their structures were characterized. The proteoglycan, AB-20-IVa-2 showing the most potent anti-complementary and macrophage activity was composed of glucose, galactose, mannose, xylose, fucose and arabinose in a molar ratio of 3.48:1.83:1.00:0.79:0.74:0.11 and its main component amino acids were phenylalanine (34.72%) and valine (27.84%). The neutral polysaccharides, AB-20-Ia and AB-20-IIa-2a showing lower activity than AB-20-IVa-2, consisted of xylose, glucose, mannose, fucose and arabinose in molar ratios of <0.05:<0.05:2.07:1.00:2.72 and 2.16:1.58:1.00:0.20:0.14, respectively. The molecular weights of AB-20-Ia, AB-20-IIa-2a and AB-20-IVa-2 were 840,000, 750,000 and 650,000 respectively. In the $^1H-\;and\;^{13}C-NMR$ spectra of AB-20-Ia and AB-20-IIa-2a, AB-20-Ia showed only ${\beta}-configuration\;(^1H:\;4.8\;ppm,\;^{13}C:\;107.0\;ppm)$ in the anomerization of the glycosidic linkages, while AB-20-IIa-2a had both ${\alpha}-anomer\;(^1H:\;5.4\;ppm,\;^{13}C:\;102.0\;ppm)\;and\;{\beta}-anomer$. Especially, AB-20-Ia and AB-20-IIa-2a showed acetyl signals $(^1H:\;2.5\;ppm,\;^{13}C:\;21.0\;ppm)$. In the methylation analysis of the three polysaccharides, high proportion of 1,6-linked glucofuranosyl residues were detected in AB-20-Ia, whereas 1,6-linked glucopyranosyl residues and branches linked at position 4 of those mainly contained in AB-20-IIa-2a. AB-20-IVa-2 consisted mainly of 1,2-linked xylofuranosyl residues and 1,6-linked glucopyranosyl residues and branches linked at position 3 of those.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1186-1192
• /
• 2003

The food components and quality characteristics of two kinds of boiled-dried anchovies (Engraulis japonica) in the Korean market such as the Jukbang-Myoel (JM) and Kwonhyunmang-Myeol (KM) were investigated. KM was higher in moisture content, and lower in crude protein and lipid contents than JM. Volatile basic nitrogen was higher in KM than in JM, whereas TBA value showed higher levels in JM. Total combined amino acid contents of KM and JM were 41.9∼46.6 g/100 g and 42.0∼49.2 g/100 g, respectively, and large sized boiled-dried anchovies revealed higher contents than small sized ones in both samples. Their major amino acids were Glu, Asp, His, Leu, Ala and Arg. Total lipids of KM and JM were consisted of 55.4 ∼ 68.4%, 53.0 ∼ 68.0% neutral lipid and 31.6∼44.6%,32.0∼47.0% polar lipid, respectively, and their major fatty acids were 14:0, 16:0, 16:1n-7, 18:1n-9, 20:5n-3 and 22:6n-3. In taste compounds of boiled-dried anchovies, free amino acid contents of Km and JM were 953.7 ∼ 1,044.8 mg/100 g and 968.8 ∼ 1,306.4 mg/100 g, respectively, and main free amino acids were Tau, His, Ala, 1-methyl his, Lys, Glu and Gly. The contents of other taste-active components such as IMP, total creatinine, TMAO and inorganic ions were not significantly different between KM and JM. The results of sensory evaluations for organoleptic characteristics, small sized JM showed no difference in sensory qualities, whereas large sized JM showed good qualities for appearance, taste and odor compared with KM.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1015-1021
• /
• 2007

To expand the use of rainbow trout, the preparation of canned rainbow trout was conducted and the characteristics were also examined. Canned boiled rainbow trout was low in moisture, while high in lipid and ash compared to commercial canned salmon. There was no difference in the protein content between two kinds of canned fish. The contents of free amino acid and total amino acid of canned boiled rainbow trout were 330.9 mg/100 g and 18.2 g/100 g, respectively, and the major amino acids were glutamic acid (68.6 mg/100 g) and anserine (124.1 mg/100 g) in free amino acid and glutamic acid (18.0%), aspartic acid (8.6%), lysine (8.4%) and leucine (8.9%) in total amino acid. The mineral contents of canned boiled rainbow trout were 123.3 mg/100 g for potassium, 271.3 mg/100 g for calcium, 40.3 mg/100 g for magnesium, 2.4 mg/100 g for ferrous and 244.3 mg/100 g for phosphorus. The fatty acid composition of canned boiled rainbow trout was the highest (43.7%) in polyenoic acid, followed by monoenoic acid (28.8%) and saturated acid (27.5%) and their main fatty acids were 16:0 (18.4%), l8:1n-9 (20.6%), l8:2n-6 (17.3%) and 22:6n-3 (12.7%), respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.842-851
• /
• 1996

Background : Rifampicin(RFP) is a key component of the antituberculous shon-course chemotherapy and the RFP-resistance is a marker of multi-drug resistant(MDR) M. tuberculosis. rpoB gene encodes the ${\beta}$-subunit of RNA polymerase of M. tuberculosis which is the target of RFP. Recent reports show that rpoB gene mutations are the cause of RFP resistance of M. tuberculosis and the main mechanism of rpoB gene mutation is point mutation. And PCR-SSCP is a rapid and easy method for detecting point mutations. So we performed PCR-SSCP of rpoB gene of M. tuberculosis and compared the result with traditional RFP sensitivity test. Method : The 27 RFP sensitive M. tuberculosis culture isolates and 25 RFP resistant isolates were evaluated. The RFP sensitivity test was done at the Korean Tuberculosis istitute. The DNA was extracted by bead beater method and was amplified with primers TR-8 and TR-9 in a 20ul PCR reaction containing 0.1ul(luCi) [${\alpha}-^{32}P$] - dCTP. After amplification, SSCP was done using non-denaturaring polyacrylamide gel electrophoresis. Then direct sequencing was done in cases of different eletrophoretic mobility compared with that of H37Rv. In 19 cases, we compared PCR-SSCP results with patient's clinical course and the results of traditional RFP sensitivity test. Results : 1) All 27 RFP sensitive M. tuberculosis isolates showed the same electrophoretic mobility compared with that of H37Rv. And all 25 RFP resistant M. tuberculosis isolates showed different electrophoretic mobility. 2) The mechanism of rpoB gene mutation of M. tuberculosis is mainly point mutation. 3) The PCR-SSCP results correlate well with traditional RFP sensitivity and patient's clinical response to antituberculous treatment. Conclusion: The PCR-SSCP of rpoB gene is a very sensitive and rapid mehod in detecting RFP- resistant M. tuberculosis.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.35-51
• /
• 2012

Cloud computing is internet-based computing where computing resources are offered over the Internet as scalable and on-demand services. In particular, in case a number of various cloud services emerge in accordance with development of internet and mobile technology, to select and provide services with which service users satisfy is one of the important issues. Most of previous works show the limitation in the degree of user satisfaction because they are based on so called concept similarity in relation to user requirements or are lack of versatility of user preferences. This paper presents cloud service selection reasoning which can be applied to the general cloud service environments including a variety of computing resource services, not limited to web services. In relation to the service environments, there are two kinds of services: atomic service and composite service. An atomic service consists of service attributes which represent the characteristics of service such as functionality, performance, or specification. A composite service can be created by composition of atomic services and other composite services. Therefore, a composite service inherits attributes of component services. On the other hand, the main participants in providing with cloud services are service users, service suppliers, and service operators. Service suppliers can register services autonomously or in accordance with the strategic collaboration with service operators. Service users submit request queries including service name and requirements to the service management system. The service management system consists of a query processor for processing user queries, a registration manager for service registration, and a selection engine for service selection reasoning. In order to enhance the degree of user satisfaction, our reasoning stands on basis of the degree of conformance to user requirements of service attributes in terms of functionality, performance, and specification of service attributes, instead of concept similarity as in ontology-based reasoning. For this we introduce so called a service attribute graph (SAG) which is generated by considering the inclusion relationship among instances of a service attribute from several perspectives like functionality, performance, and specification. Hence, SAG is a directed graph which shows the inclusion relationships among attribute instances. Since the degree of conformance is very close to the inclusion relationship, we can say the acceptability of services depends on the closeness of inclusion relationship among corresponding attribute instances. That is, the high closeness implies the high acceptability because the degree of closeness reflects the degree of conformance among attributes instances. The degree of closeness is proportional to the path length between two vertex in SAG. The shorter path length means more close inclusion relationship than longer path length, which implies the higher degree of conformance. In addition to acceptability, in this paper, other user preferences such as priority for attributes and mandatary options are reflected for the variety of user requirements. Furthermore, to consider various types of attribute like character, number, and boolean also helps to support the variety of user requirements. Finally, according to service value to price cloud services are rated and recommended to users. One of the significances of this paper is the first try to present a graph-based selection reasoning unlike other works, while considering various user preferences in relation with service attributes.