• 동력기계공학회지
• /
• 제9권1호
• /
• pp.5-13
• /
• 2005

Acoustic emission(AE) is defined as the transient elastic waves thar are generated by the rapid release of energy. The advantage of AE is that very early crack growth can be detected well before a highly stressed component may fail. At present, an exact diagnosis is the most reliable means for determining the soundness of structures during power plant operations. AE monitoring has been applied successfully in power plants to determine mechanical problems, pressure vessel integrity and external valves leaks, vacuum leaks, the onset of cavitation in pumps and valves, the presence of flow(or no flow) in piping and heat exchange equipment, etc. Acoustic emission(AE) technology has recently strengthened its application base, and practitioners' understanding of the technique's fundamentals. This paper introduces the methods of a survey and assessment on AE monitoring applications in nuclear, fossil and hydraulic power plant. The main objective of this paper was to obtain information on various applications of AE technology in power plant.

• Communications for Statistical Applications and Methods
• /
• 제18권6호
• /
• pp.761-770
• /
• 2011

회귀모형에 연관성이 높은 설명변수들이 포함되면 다중공선성의 문제가 야기되며, 동시에 자료에 회귀 이상점들이 포함되면 최소자승추정량에 바탕을 둔 제반 통계적 추론은 심각한 결함을 갖게 된다. 이러한 현상들은 데이터마이닝 분야에서 많이 볼 수 있는데, 본 논문에서는 두 가지 문제를 동시에 해결하기 위한 방안으로서 로버스트주성분회귀를 제안하였다. 특히 최적의 주성분을 선정하기 위한 새로운 기준을 개발하였는데, 설명변수들의 표본공분산 대신에 MVE-추정량을 기반으로 하였으며, 고유치가 아니라 상태지수의 크기에 바탕을 둔 선정기준을 제안하였다. 그리고 주성분모형에서의 추정을 위하여 회귀이상점에 대해 로버스트한 LTS-추정을 도입하였다. 제안된 선정기준이 기존의 기준들보다 다중공선성과 이상점이 유발하는 문제들을 잘 해결할 수 있음을 모의실험을 통하여 확인하였다.

• 한국소음진동공학회논문집
• /
• 제26권4호
• /
• pp.458-468
• /
• 2016

Electromechanical model for analyzing a multimodal piezoelectric energy harvester comprising three connected beams is presented in this paper. This system consists of three beams which are connected alternately. The piezoelectric layer is only attached to the middle beam. With this special structural configuration, the first, second, and third natural frequencies are congregated so that the energy harvester can generate meaningful amount of power consistently when the main frequency component of the excitation varies around the lowest three natural frequencies of the harvester. To investigate the dynamic and electric response of the piezoelectric energy harvester, an electromechanical model is developed using the Kane's method and the accuracy of the model is validated by comparing the results obtained with the model with those obtained with the commercial software ANSYS. The results show that the piezoelectric energy harvester comprising three connected beams has much broader power generating frequency range than that of the conventional piezoelectric energy harvester.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.670-675
• /
• 1994

Yhis paper describes a fault diagnosis simulation of the Real-Time Multiple Fault Dignosis System (RTMFDS) for forcasting faults in a system and deciding current machine state from signal information. Comparing with other diagnosis system for single fault,the system developed deals with multiple fault diagnosis,comprising two main parts. One is a remotesignal generating and transimission terminal and the other is a host system for fault diagnosis. Signal generator generate the random fault signal and the image information, and send this information to host. Host consists of various modules and agents such as Signal Processing Module(SPM) for sinal preprocessing, Performence Monotoring Module(PMM) for subsystem performance monitoring, Trigger Module(TM) for multi-triggering subsystem fault diagnosis, Subsystem Fault Diagnosis Agent(SFDA) for receiving trigger signal, formulating subsystem fault D\ulcornerB and initiating diagnosis, Fault Diagnosis Module(FDM) for simulating component fault with Hierarchical Artificial Neural Network (HANN), numerical models and Hofield network,Result Agent(RA) for receiving simulation result and sending to Treatment solver and Graphic Agent(GA). Each agent represents a separate process in UNIX operating system, information exchange and cooperation between agents was doen by IPC(Inter Process Communication : message queue, semaphore, signal, pipe). Numerical models are used to deseribe structure, function and behavior of total system, subsystems and their components. Hierarchical data structure for diagnosing the fault system is implemented by HANN. Signal generation and transmittion was performed on PC. As a host, SUN workstation with X-Windows(Motif)is used for graphic representation.

• 생약학회지
• /
• 제4권4호
• /
• pp.173-179
• /
• 1973

Tobacco, which has nicotine for its main component, has been in medical use for a long time and in great demand for smoking throughout the world. The purpose of this study is to control nicotine amount and to increase yield more efficiently by the method of systematic variations. Nutrient solutions for tobacco culture were designed and prepared in 10 kinds with mineral ions: $NO_{3^-},\;SO_{4^{--},\;PO_4{^{-3},\;K,{^+}\;Ca,{^{++}\;Mg,{^{++}$, Mn, B, Cu, Zn, Mo, and Fe. Nicotiana tabacum L. Yellow Special A, grown for 50days from sowing, was replanted in plastic pot and cultured for 65 days supplying with prepared nutrient solutions. After harvest, their nicotine amount was determined by means of acid-base titrimetry and gas chromatography. The tobacco plants in KCa 4 and KMg 9 groups demonstrated the highest yield in total leaves weight and KMg 7 group in average nicotine amount. They have shown the increase of nicotine amount from lower leaf to 16th leaf, and thereafter decreased gradually. The author also pursued the optimum ionic proportions for the absolute nicotine amount in tobacco by means of systematic variations method.

• 한국소음진동공학회논문집
• /
• 제12권5호
• /
• pp.374-379
• /
• 2002

A new active muffler system has been developed and its superior performance on both noise reduction and engine torque increase is demonstrated with experiment. Main characteristic of the proposed muffler system is the use of destructive interference by transmission path difference of divided exhaust pipes to reduce major exhaust noise components thereby overcoming problems of other active exhaust noise control methods. The exhaust pipe is divided into two sections and joined again downstream. One divided pipe has a sliding mechanism to vary its length, which is controlled to make half wavelength transmission path difference for the major engine rpm frequency. In this system one divided pipe is used to control major rpm frequency and its Harmonics and another pipe is used to control noise component double the frequency of rpm. An after-market tuning muffler, which has very simple internal structure and minimal back pressure, is also installed to remove remaining wideband noise. To make the system to be small enough to be practical, conventional muffler is also installed and used in low rpm range and active muffler is only employed in high rpm range. Noise reduction of the proposed system is comparable to conventional passive muffler. The engine dynamo test has proved the proposed system can recover almost all the torque lost by conventional muffler.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제29권2호
• /
• pp.197-214
• /
• 2015

본 연구는 예비수학교사교육에 적용하기 위한 학습자 중심의 플립드 러닝(Flipped Learning) 수업을 설계하여 플립드 러닝 교수 학습 방법의 활용 가능성을 탐색하는 것을 목적으로 한다. 연구의 목적 달성을 위하여 플립드 러닝 교수 학습 모형을 탐구하여 수업 설계를 하였다. 수업 설계는 전형적인 교수설계 과정의 주요단계를 포함하고 있는 ADDIE 모형을 기반으로 설계하였다. 교사 양성을 위한 예비교사 교육의 주된 목적을 달성하기 위하여 예비수학교사 교육의 필수 교과목인 수학교재연구지도법 교과목에 대한 플립드 러닝 교수 학습 설계모형의 단계와 단계별 구성요소를 고려하여 수업을 설계하고 그 단계를 수업 전, 수업 중, 수업 후 3단계로 나누어 제시하였다.

• 한국식생활문화학회지
• /
• 제33권1호
• /
• pp.86-94
• /
• 2018

This study was designed to evaluate the antioxidant activities and protective effects on PC12 cells of the extract of Epimedium koreanum and its main constituents icariin and icariside I. After screening the seven identified flavonoid glycosides from E. koreanum through DPPH (2,2-diphenyl-1-picryl-hydrazyl-hydrate) assay, E. koreanum, Icariin and Icariside I exhibited significant effect on radical scavenging activity. E. koreanum, icariin and icariside I were examined using DPPH, ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)) and FRAP (ferric reducing ability power) assay. In all antioxidant assays, E. koreanum, icariin and icariside I showed high radical scavenging activities in a dose-dependent manner. Protective effects against $H_2O_2-induced$ PC12 cells were assessed with MTT assay. The results indicated that cell viability and protection on PC12 cells of icariside I and icariin increased dose dependently. These study results suggest that E. koreanum, icariin and icariside showed high antioxidant capacities and cell protective effects. Icariside I, one of the metabolites of icariin, may be a new and effective flavonoid compound as a functional component.

• 한국식품위생안전성학회지
• /
• 제12권3호
• /
• pp.234-239
• /
• 1997

Guh Sung Y.L.S.-95 is one of the polyacidic solution of which main component is acetic acid. We investigated the subchronic toxicity of the Guh Sung Y.L.S.-95 using SPF ICR mouse for 4 weeks. The Guh Sung Y.L.S.-95 was administered by gastric intubation, 1.0, 2.5, 5.0 g/kg body weight. The results are as follows: 1. There are no adverse effects on the clinical obserbation and body weight changes. Also, there are some significant changes in organ weight, but it was meaningless because of the absence of dose-response relationships. 2. In the hematological patterns of administered mouse, there are no significant changes between the treated groups. Also, there are no serological enzymatic changes in the treated mouse. In the 1.0 g/kg treated group, ASP activity was increased significnatly compared with control group. But, this level of activity was fall under the normal physiological range of control mouse. 3. Histopathological findings of the brain, liver, heart, spleen, kidneys, stomach, lung, testis, ovary, uterus and thymus were not observed in the treated mouse. From the above results, the Guh Sung Y.L.S.-95 has no toxicity upto the 5.0 g/kg/day of oral dose for 4 weeks.

• 생약학회지
• /
• 제23권3호
• /
• pp.126-131
• /
• 1992

Four flavonoids were isolated from the aerial parts of Euphorbia ebracteolata. On the basis of chemical and spectroscopic evidence, the structures of these compounds were established as $quercetin-3-O-{\beta}-D-glucoside$(isoquercitrin)(I), quercetin-3-O-rutinoside(rutin)(II), kaempferol-3-O-rutinoside(III) and $quercetin-3-O-(2'-O-galloyl)-{\beta}-D-glucoside$(IV) which was the main flavonoidal component in this plant. The isolation of flavonoids from E. ebracteolata is the first example.