• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.S1
• /
• pp.89-109
• /
• 1996

The main information for a marine navigation is ship's bearing obtained from Gyro, Gyrocompass, Magneticcompass and electronic navigation systems such as LORAN, OMEGA and GPS. However, some of these systems have a disadvantage or restricted conditon involved critical problems in a war-ship and weapon system. In the work, we have done the basic resrarch, analysis of error pattern for GPS, for the development of the ship's seondary bearing sensor (GPS-Compass) to provide the back-up system of Gyro/Gyrocompass and a substitution way of Magneticcompass.

• Tribology and Lubricants
• /
• v.9 no.1
• /
• pp.55-61
• /
• 1993

Recently, due to the erosion damage that were generated increasingly at alloy metals of slide bearing by cavity of lubricating oil with tendency of high speed and high output of reciprocating engine, there is a need to study the process on the formation of cavitation erosion, and the characteristic of cavitation erosion at lubricating oil environments under various condition for marine ship. Therefore, the apparatus of cavitation erosion experiment used 20 KHz, $24 \mu m$ piezoelectric vibrator. The main results obtained through this test method are as follows: 1. The max. erosion rate at lubricating oil environments was related to the change of space, oil film thickness, and shown to tendency of gear oil>system oil>turbine oil>mixed oil environments with different viscosity. 2. The pitted hole by cavitation erosion at high viscosity oil environments became small and deep, and in addition to, they appeared to be wide and shallow at low viscosity.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.5-6
• /
• 2006

대형 저속 2행정기관을 탑재한 선박에서 축계배치와 관련된 선미측 후부 메인엔진 베어링의 손상이 증가하는 경향이 있다. 메인엔진을 포함한 선체는 최적화로 인하여 변형하기 쉬운 경향에 있고, 고출력을 요구하는 추진 축계는 이것과 반대의 경향을 가지므로 축계 배치 변화에 대한 감도가 높아져서 메인엔진 베어링의 손상이 발생하게 된다. 이러한 문제에 대한 대책으로 메인엔진 베어링을 포함한 보다 정확한 배치계산을 할 필요가 있다. 이 논문에서는 축계배치계산 고정도화의 일환으로 메인엔진 베어링 수가 베어링 반력에 미치는 영향에 대하여 검토한다.

• Tribology and Lubricants
• /
• v.22 no.1
• /
• pp.14-19
• /
• 2006

VCT(Variable Cam Timing) system is one of very useful engine components to improve fuel economy and overcome emission regulation etc. In order to adapt the VCT to a base engine, many design mod ifications in the mechanical and lubrication fields are required. Especially, because the VCT performance itself depends on supplied oil flow rate and pressure, it is very important to evaluate the engine lubrication system in a viewpoint of supplied oil flow rate and pressure. In this paper, unsteady transient flow network analysis on the engine oil circuit system was carried out to do this.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2036-2037
• /
• 2008

An Emergency Diesel Generator (EDG) manufactured by a French company Wartsila SACM, is a tandem type engine, consisted of two 10 cylindered diesel engines on each side. Manual provided by the manufacturer states that engine bearing requires inspection every 15 years. However, it is difficult for an inspector to access through a manhole located in the lower compartment of engine. Furthermore, during a routine or scheduled maintenance, it is not possible to disassemble main engine bearing and crank shaft, and perform inspection. Two methodologies are suggested here to resolve the problem. One method is to lift the engine and partially perform the maintenance service, and the other method is to disassemble the engine completely and to perform maintenance service by the manufacturer. Pros and cons of two methodologies were thoroughly compared.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.428-432
• /
• 2004

The important problem in the high speed spindles is to reduce and minimize the thermal effect by the motor and ball bearings. Thermal characteristics according to the bearing preload and hollow shaft cooling are studied for the test spindle with the oil mist lubrication and high frequency motor. Bearings and motor e main heat generation, and heat generation by ball bearings as a function of load, viscosity and gyroscopic moment effect are considered. Temperature distribution and thermal displacement according to the speed of spindle are measured by thermocouple and gap sensor. The results show that the fitting preload and hollow haft cooling are very effective to minimize the thermal effect by the motor and ball bearings.

• Journal of Family Resource Management and Policy Review
• /
• v.20 no.3
• /
• pp.67-93
• /
• 2016

This study investigated the attitudes toward childbearing and the need for policies supporting childcare according to the mothers' employment status. Data from 6 employed and 6 unemployed housewives with 1 child were collected using in-depth interviews. The main results from the data analysis comprised 4 themes: 1. the ideal and the real about childbearing; 2. changed experiences after bearing the first child; 3. the meaning of parenting; and 4. husband's division of household/caring labor. A difference between employed and unemployed housewives was founded in their attitude toward childbearing. Furthermore, it was verified that the respondents were not satisfied with present policies and services for childbearing and childcare and they required existing policies to be more effective. The implications for related polices are suggested on the basis of these findings.

• Structural Engineering and Mechanics
• /
• v.26 no.3
• /
• pp.277-295
• /
• 2007

3-D wall panels are used in construction of exterior and interior bearing and non-load bearing walls and floors of building of all types of construction. Fast construction, thermal insulation, reduced labor expense and weight saving are the most well pronounced advantage of such precast system. When the structural performance is concerned, the main disadvantage of 3D panel, when used as floor slab, is their brittleness in flexure. The current study focuses on upgrading ductility and load carrying capacity of 3D slabs in two different ways; using additional tension reinforcement, and inserting a longitudinal concentrated beam. The research is carried on both experimentally and numerically. The structural performance in terms of load carrying capacity and flexural ductility are discussed in details. The obtained results could give better understanding and design consideration of such prefabricated system.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.295-299
• /
• 2013

This paper presents the new structure of a spindle motor for hard disk drive (HDD). It can produce axial force as well as torque without a pulling plate or a pulling magnet required for the normal operation of a hydrodynamic bearing in rotating-shaft structure. The proposed models have different air gap length along the axial direction by changing the thickness of permanent magnet (PM). One has a single slope and the other has double slopes on the surface of PM. For the design of the proposed models, variables are defined and its effects on the motor performances are investigated by 3-demensional finite element analysis (FEA). The equi-performance curves are investigated for the main characteristics of the spindle motor such as generated torque, axial force and torque ripple ratio. The validity of the proposed models is verified by the feasibility study and performance evaluation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.113-116
• /
• 2004

No specific guidelines are for computing the shear strength of steel coupling beam connections embedded in the reinforced concrete shear wall. In this paper, a theoretical study of the strength of hybrid coupled shear wall connections is achieved. The bearing stress at failure in the concrete below the steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the steel coupling beam section to the thickness of the hybrid coupled shear wall. To revise factor affecting shear transfer strength across connections between coupled shear walls and steel coupling beam, experimental studies are achieved. The main test variables were auxiliary details of stud bolts. In this studies, these proposed equations are shown to be in good agreement with the test results reported in the paper and with other test data in the literature.