1990년대 이후 한국경제의 성장: 수요 및 공급 측 요인의 문제 (The Economic Growth of Korea Since 1990 : Contributing Factors from Demand and Supply Sides)
-
- KDI Journal of Economic Policy
- /
- 제31권1호
- /
- pp.169-206
- /
- 2009
본 연구는 1990년대 이후의 한국경제의 성장패턴을 이해하기 위한 노력의 일환이다. 이를 위해, 본 연구에서는 Blanchard and Quah(1989)가 제시한 바와 같이 장기제약식하의 구조적 벡터자기회귀추정법(Structural Vector Auto Regression: SVAR)에 의거하여 우리나라의 경제를 오늘에 이르게 한 다양한 충격들을 식별하고 각각의 상대적 기여도를 구분하고자 하였다. 보다 구체적으로는 Blanchard and Quah의 2-변수 모형과 이를 확장한 3-변수 모형, 그리고 New Keynesian류의 선형모형을 변형시킨 두 개의 모형을 분석하였다. 특히, 후자의 두 모형은 1997년 외환위기 이후 있었던 외환시장체제(고정환율제도에서 변동환율제도)와 통화정책기조(통화총량제에서 물가목표제)의 변화를 반영하도록 구성되었다는 점에서 의의를 갖는다. 이러한 각 모형으로부터의 추정 결과를 충격반응 및 예측오차분해 분석의 형식으로 정리 비교한 결과 다음과 같은 두 가지 공통점을 발견할 수 있었다. 첫째, 경제성장률의 변동은 생산성의 충격에 주로 기인하며, 이와 같은 경향은 2000년대 이후 더 강해진 것으로 보인다. 이는 2000년대 이후 우리 경제의 성장이 잠재성장률과 밀접한 관계를 갖고 있음을 시사한다. 둘째, 2000년대 이후 충격반응의 크기나 지속성이 전반적으로 줄어드는 경향이 있다. 무역의존도가 높은 우리 경제상황에 비추어 2000년대의 전 세계적인 저(低)금리, 저(低)인플레이션 및 견실한 성장세, 그리고 중국경제의 부상이 자본 및 수출 수입 수요의 안정적인 확보를 도모하여 특히 각 부문 충격이 경제에 미치는 영향을 반감시켰을 개연성이 있다. 분석에 사용된 모형과 식별에 사용된 충격의 다양한 조합에도 불구하고 위의 두 가지 패턴은 일관되게 관측되고 있음에 비추어 볼 때, 2000년 이후 우려되고 있는 우리나라의 경제성장률 저하 현상은 잠재성장률 하락에 주로 기인하는 것으로 판단된다.
지진재해대책법이 2009년 3월에 발효됨에 따라 가속도 지진관측을 수행하여야 할 기관이 대폭 확대되었다. 소방방재청의 추정에 의하면 최소 400개소의 자유장 가속도 관측소가 설치될 예정이다. 지진계측기의 성능 향상과 통신 기술의 발달로 지진관측소 설치가 보편화되면서 지진관측의 주 기능이 신속 피해 예측과 경보 발령 등 지진방재에 적극적으로 활용할 수 있도록 전환되고 있다. 신속 지진피해 예측의 기반기술인 실시간 지진동 영상화기법을 소개하였다. 이 기술은 신속한 지진피해 평가를 위한 실시간 자료 취합뿐 아니라 시각적으로 정보를 파악할 수 있도록 개발되어 활용되고 있다. 한편 지진피해는 주로 S 파와 연속되는 표면파에 의해 발생한다. 최초로 도달하는 P 파로부터 최대 지반운동 크기와 지진 피해를 예측하여 경보를 발령하는 것이 지진조기경보체계이다. 지진조기경보의 기술개발 현황과 함께 2007년 오대산지진에 적용한 예를 소개하였다. 조기경보 기술은 기상청의 지진통보 체계를 획기적으로 개선시킬 수 있다. 또한 지역별로 분산된 주요 국가 시설물의 지진방재를 위해 활용할 수 있는 분산형 조기경보 시스템의 구성과 활용방안을 제안하였다.
본 연구에서는 마이크로파 산란계 시스템을 이용하여 벼, 콩 작물을 대상으로 후방산란계수와 작물생육변화를 관측하고 pauli decomposition을 통해 얻어진 인자값과 작물생육과의 비교를 통해 작물 생육단계를 추정하였다. Pauli decomposition 방법을 이용 생육시기에 따른 벼 산란특성을 분석한 결과 L-밴드는 벼 출수기 (DOY 222, 8월 10일) 이후 이중 산란 (
하천의 탈질은 수질 개선과 정확한 아산화질소(
동중국해 북부와 경계를 이루는 황해 남동부 해역에 대해 무기탄소의 월별 재고와 변동을 초래하는 플럭스들을 상자 모형으로 모의하였다. 월별 용존무기탄소의 자료는 네 차례 계절을 대표하는 관측 결과에 최근 발표된 논문의 자료를 발췌하여 구성하였다. 연간 용존무기탄소(CT)의 재고가 정상상태에 있으며 표층에서 이류에 의한 변동이 무시할 정도로 작다고 가정하고 표층과 심층의 2-상자 모형을 사용했다. 모의 결과 월별 표층과 심층 사이의 재고는 혼합층 두께의 변동에 따른 혼합 플럭스가 -40~35 mol C m-2 month-1의 규모로 주도했다. 대기로부터 유입되는 CO2 플럭스는 약 2 mol C m-2 yr-1 이고, 혼합 플럭스의 1/100 미만으로 작았다. 생물 펌프 플럭스는 4~5 mol C m-2 yr-1 범위로 추정되었는데 이는 현장 실측 자료에 비해서 절반가량 수준이다. 물기둥의 CT 재고는 동계 혼합이 끝나는 4월에 최대를 보이며 성층기에 조금씩 줄어든다. 따라서 CT 총량은 성층기에 혼합기보다 높게 나타나는데 정상상태가 유지되려면 최대와 최소의 차분인 18 mol C m-2 yr-1 (= 216 g C m-2 yr-1)이 동중국해로 송출되어야 한다. 이를 황해 남부 경계 전체에 대해 외삽하면 4 × 109 g C yr-1 규모이다. 이 플럭스는 개념상 대륙붕 펌프에 해당한다. 실제로 태평양 외양역에 도달하려면 동중국해를 거쳐야 하므로 실제로 대륙붕 펌프로 기여하는 플럭스의 크기는 이보다 현저하게 낮을 것으로 전망된다. 자료 부족과 계산에 필수적인 가정에 수반되는 오류 때문에 추정값은 상당한 크기의 오차를 포함하지만 모의를 통해 CT의 변동을 초래하는 플럭스 사이의 상대적인 기여도와 범위를 제약할 수 있었고 향후 연구에서 주목해야 할 사항을 도출할 수 있었다.
The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.
학계와 금융파생상품 가격결정이나 변동성매매와 같은 실무영역 모두에서 주식시장의 변동성은 중요한 역할을 한다. 본 연구는 GARCH 모형에 기초하여 한국주식시장의 변동성을 정확히 예측함으로써 변동성매매시스템의 성과를 높일 수 있는 새로운 방법을 제시하였다. 특히, 여러 연구 자료에서 밝혀지고 있는 변동성 비대칭성개념을 도입하였다. 최근 새로 개발된 한국주식시장 변동성 지수인 VKOSPI를 변동성 대용값으로 사용한다. VKOSPI는 KOSPI 200 지수옵션의 가격을 이용하여 계산된 값으로서 옵션딜러들의 변동성 예측치를 반영하고 있다. KOSPI 200 옵션시장은 1997년 시작되었으며, 발전을 거듭하여 현재 하루 거래량이 1,000만 계약을 넘어서면서 세계 최고의 지수옵션시장으로 발전하였다. 이러한 옵션시장에 반영된 변동성을 분석하는 것은 투자자들에게 좋은 투자정보를 제공하게 될 것이다. 특히, 변동성 대용값으로 VKOSPI를 사용하면 다른 변동성 대용치를 사용할 때 발생하는 통계적 추정의 문제를 피해 갈 수 있다. 본 연구는 2003년부터 2006년의 KOSPI 200 지수 일별자료를 대상으로 최우도추정방법(MLE)을 이용하여 GARCH 모형을 추정한다. 비대칭 GARCH 모형으로는 Glosten, Jagannathan, Runke의 GJR-GARCH 모형, Nelson의 EGARCH 모형, 그리고 Ding, Granger, Engle의 PARCH모형을 포함하며 대칭 GARCH 모형은 (1, 1) GARCH 모형을 이용한다. 2007년부터 2009년까지의 KOSPI 200 지수 일별자료를 대상으로 반복적 계산과정을 통해 내일의 변동성 예측값과 오르고 내리는 변화방향을 예측하였다. 분석 결과 시장변동성과 예기치 않은 주가변동 사이에는 음의 상관관계가 존재하며, 음의 주가변동은 동일한 크기의 양의 주가변동보다 훨씬 더 큰 변동성의 증가를 가져옴을 알 수 있다. 즉, 한국 주식시장에도 변동성 비대칭성이 존재함을 보여주었다. GARCH 모형을 이용하여 내일의 VKOSPI의 등락방향을 예측하고 이를 이용하여 변동성 매매시스템을 개발하였다. 내일의 변동성이 상승할 것으로 예측되면 스트래들매수전략을 이용하고 반대로 변동성이 하락할 것으로 예측되면 스트래들 매도전략을 이용한다. 변동성의 변화방향성을 맞춘 경우에는 VKOSPI 변동분을 더하고 틀린 경우에는 변동분을 뺀 누적합을 이용하여 변동성매매전략의 총수익을 계산한다. 모형추정용 자료구간의 경우 통계적 기준인 MSPE 기준으로는 PARCH 모형의 적합도가 가장 높고, 예측방향의 적중도를 재는 MCP 기준으로는 EGARCH 모형이 가장 높은 값을 보여주었다. 테스트용 자료구간의 경우에는 PARCH 모형이 모형적합도와 내일의 변동성 등락방향 예측에서 가장 좋은 결과를 보여주었다. 모형추정용 자료구간의 경우 GARCH 모형 전체에서 매매이익을 기록하고 있고 테스트용 자료구간의 경우에는 EGARCH 모형을 제외한 GARCH 모형들이 매매이익을 보여주었다. 본 연구에서 나타난 변동성의 군집과 비대칭성 현상으로부터 변동성에 비선형성이 존재함을 알 수 있었으며, 비선형성에서 좋은 결과를 보이고 있는 인공지능시스템과 비대칭 GARCH 모형을 결합한다면 제안된 변동성매매시스템의 성과를 많이 개선할 수 있을 것으로 판단된다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70