• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6453-6457
• /
• 2015

본 논문에서는 솔레노이드의 자기 이론과 시뮬레이션을 통해 해석의 정확성을 검증하였다. 솔레노이드는 간단한 구조와 빠른 응답성을 바탕으로 기계 산업, 의료 등의 분야에 활발히 사용되어지고 있다. 솔레노이드 엑츄에이터는 전자기력을 활용하며 전류를 인가시키면 자기장이 형성되어 자기력을 발생시키고 플런저를 직선운동 또는 회전운동으로 구동을 시키는 장치이다. 이론 해석은 Biot-Savart's law를 통해 축방향 및 반경방향 자기장 (Magnetic flux density, B)의 값을 구했으며, 임의의 점 P에서의 자기장 값도 계산하였다. Ansys의 Magnetostatic Analysis를 이용하여 해석 시뮬레이션을 진행하였고, 그 결과를 비교하여 이론과 해석의 유사성을 살펴보았다. 비교 결과를 통해 오차 범위 안에서 error값이 존재함을 알 수 있었고, 따라서 정확성을 검증할 수 있었다.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.13-19
• /
• 2011

The magnetic polishing is the useful method to finish using magnetic power of magnet. That method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe. The magnetic abrasive polishing method is not so common for machine that it is not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in this paper deals with development of the magnetic abrasive using Sr-Ferrite. In this development, abrasive grain GC used to resin bond fabricated low temperature. And Sr-Ferrite of magnetic abrasive powder fabricated that Sr-Ferrite was crused into 200 mesh. The XRD analysis result show that only GC abrasive and Sr-Ferrite crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it is found that GC abrasive and Sr-Ferrite were strong bonding with each other by bond. The magnetic polishing is performed by polishing the surface of pipe by attracting magnetic abrasives with magnetic fields. This can be widely applied for finishing machinery fabrications such as various pipes and for other safety processes. In this paper, we could have investigated in to the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.312-314
• /
• 2002

Magnetic circuit design of HTS (High Temperature Superconducting) motor is important to achieve the power at a given load condition, and it is essential to the thermal design for HTS motor rotors. To determine the result of thermal design, the magnetic field distribution has to be known exactly. On the basis of the 2 dimensional magnetic field analysis, the magnetic field distributions due to several cases are calculated by using Biot-Savart equation and magnetic image method. And the I$_{c}$ of HTS field coil was calculated by using I$_{c}$-B(equation omitted) curve and 3D FEA(Finite Element Analysis).is).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.134-136
• /
• 2003

This paper proposes moving mechanism theory & magnetic core analysis regarding mini magnetic contactor and differential mechanism & bimetal analysis regarding mini thermal overload relay. In shortage of technique, we have experienced many difficulties in magnetic switch development. By this research, we developed core parts about mini magnetic switch and applied the results to optimum mini magnetic switch development

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.97-101
• /
• 2003

When HTS tapes are used in power application, they are used by winding form, such as, a pancake and a solenoid. When AC current is applied to the coil, Ac magnetic field is generated in winding. This AC magnetic field acts as an external magnetic field and makes loss. In this paper the radial magnetic field component ($B_r$) and the axial magnetic field component ($B_z$) in a pancake and a solenoid were calculated by numerical analysis method and compare with measured value. AC losses of a short sample were calculated by Norris equation and n numerical analysis based on Brandt equation. AC losses of the pancake coil and the solenoid coil were also calculated.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.107-113
• /
• 1995

Using the mathematical model of the torsional vibration in spindle system with magnetic coupling, which was proposed in the paper of dynamic analysis of spindle system with magnetic coupling(l), we derive the equations of the motion and the form of the derived equations represents Duffing equation. Numerical analyses are executed in many conditions, namely the various types in magnetic coupling, changes of the gap between driver and follower. To verify the results of the therorectical analyses, a precision dynamic drive system is manufactured and methods of the test to measure the torsional vibration of the spindle system with magnetic coupling are presented ad thests in various conditions are carried out.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.829-835
• /
• 2006

Rotatory two-phase transverse flux machine(TFM) is a relatively new type of motor with high power density, high torque, and low speed in comparison to conventional electrical motors. However, it has some shortcomings,.i.e. complex construction and high possibility of the magnetically induced vibration due to its inherent structure. This paper investigates the characteristics of the magnetic force and the torque in the rotatory two-phase TFM by using the 3-D finite element method and the spectral analysis. This research shows that the average torque decreases and that the torque ripple increases as the phase delay increases. It also shows that the unbalanced magnetic force is one of the dominant excitation forces in this machine. And it proposes a new topology of rotatory two-phase TFM to eliminate the unbalanced magnetic force.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.401-404
• /
• 2004

The electron beam machining provides very high resolution up to nanometer scale, hence the E-beam writing technology is rapidly growing in MEMS and nano-engineering areas. In the optical column of the e-beam writer, there are several lenses condensing and focusing electron beams from electron gun with fringing magnetic fields. To achieve small spot size as 1-2 nm for higher power of electron beam, magnetic lenses should be designed considering their magnetic field distribution. In this paper, the magnetic field at two condenser lenses and object lens are calculated with finite element method and discussed its performances.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.35-42
• /
• 1990

The area where age dating of the seafloor and interpretation of geomagnetic basic structure are conducted is also important in the aspect of geophysics. Near the sea mount (water depth to the top is 3900m and 6500m to the bottom), there are Mesozoic magnetic lineations at the sea-side flank along the trench axis. A two dimensional model analysis of Talwani and Heirtzler(1964) and a three dimensional model analysis of Talwani are performed by using data obtained from the marine proton magnetometer. Distribution, direction of the lineation, amplitude and period of magnetic anomaly are correlated and analysed with speed of the plate movement and lineation of the sea mount. In the west and north-west Pacific there are lots of huge sea mounts retaining the history of oceanic crust. This indicates that geomagnetic basis subsided into the oceanic crust and has interest in the aspects of the isostasy theory of the gravity.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.71-77
• /
• 2010

A discontinuity of magnetic circuits according to the end effect is generated in PMLSM. And magnetic state of the 3 phase coils becomes unbalanced. Due to the unbalanced magnetic state, the unbalanced flux linkage, back electro-magnetic force and inductance of the 3 phase coils appear. In result, the circulating current is generated by unbalanced inductance even if the input voltages are in balanced state. Then the thrust and efficiency are decreased because of the circulating current. Therefore, in this paper, the unbalanced inductance and the thrust reduction according to discontinuity of magnetic circuits are analyzed by FEA(2D). To demonstrate the validity of the analysis results, the experiment results are compared with analysis results.