• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1178-1180
• /
• 2003

The continuing need for more compact and reliable switching power supplies have aroused a renewed interest in a well founded control technique the Magnetic Amplifier(Magamp). Magamp have some advantages of higher power density, simple control circuit, good regulation, high frequency and high performance. The control method with magamp become attractive solutions for high current post regulated output applications. In this study, it is proposed that the magamp technique in flyback converters with multiple output windings. Operation principle of the proposed approach is described and design guidelines are provided. Experimental verifications on 50W multiple output flyback converter are conducted. Simulations and experimental results show that the proposed approach is high efficiency and voltage regulation of the auxiliary output is excellent.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.948-951
• /
• 2003

The design and analysis of electrical machines often require analytical models for performance assessment and system simulation. Inductances are important parameters of these models. In this paper, the methods of calculating apparent and incremental inductances are introduced for a transverse flux linear motor, which has a peculiar coil shape. The computation is accomplished by nonlinear three dimensional finite element method(FEM) and equivalent magnetic circuit network(EMCN). The improved method has been verified by a test result.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.623-626
• /
• 2001

The neon transformer consists of magnetic circuit and leakage transformer. Since the silicon steel plate is used build a core, the system is big and heavy. Thus it is difficult to install Neon Sign it is even very dangerous if the system experiences a damage when it is installed inside. To overcome these problems, power electronic circuits are applied. The Inverter type Neon transformer using MOSFET is designed and implemented. The experimental results are described.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.911-912
• /
• 2007

영구자석형 조작기(PMA)의 단점을 보완한 고전압 차단기용 전자석 조작기인 EMFA는 긴 스트로크를 가지는 차단기에도 사용이 가능하며, 특히 진공 차단기(VCB)용 조작기를 비롯하여, 가스 차단기(GCB)에 적용한 모델도 이미 개발되었다. 다양한 모델에 대한 설계 및 연구가 추가적으로 진행되고 있으나, 아직 설계 방법이 정형화되어 있지 않아 모델에 따라 그 형상이 달라지는 경우가 많다. 이러한 점을 개선하기 위해, 본 논문에서 EMFA의 설계 변수를 변화시켜 가며 나타나는 특성을 홀딩력과 자속밀도를 통해 분석하였다. 나아가 이를 바탕으로 설계 방법의 정형화에 대한 실마리를 제공하고자 한다. 해석에는 2차원 유한요소법을 이용하였고, 설계 변수는 조작기의 초기상태를 기준으로 설정하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1398-1400
• /
• 2005

In this paper, a modular dc-to-dc converter, in order to apply to the control board of train vehicles, is presented. Forward converter with active-clamp reset circuit and synchronous rectifier(SR) is employed to achieve high efficiency. To reduce the size and height of the converter, low profile magnetic components are used. The design and performance of the modular dc-to-dc converter with experiments on a 50W(5V/10A) prototype for the 60V$\sim$140V input voltage range are presented.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.94-96
• /
• 1998

The paper is described about the calculation method of the basic design dimensions, magnetic field distribution and equivalent circuit parameters for superconducting generator. To analyze the flux density, the induced voltage and the electromotive force, the airgap flux density government equation is derived from generator's analysis model.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.848-851
• /
• 2003

Display devices are becoming increasingly important as an interface between humans and machines in the growing information society In display device, PDP(Plasma Display Panel) has many advantages in that wide screen, light weight, thin, wide viewing angle and unaffected by magnetic field. In this paper, modified ramp waveform is suggested by Vt Close Curve, and PDP driving circuit is designed by modified ramp waveform, this modified ramp waveform have more addressing wall voltage better then the old ramp waveform.

• Journal of Magnetics
• /
• v.17 no.3
• /
• pp.196-199
• /
• 2012

This paper presents the analytical calculation of winding inductance for a single-phase brushless DC machine based on the magnetic circuit concept. The machine is used in the low power range of applications, such as ventilation fans, due to its simplicity and low cost. Since flux linkage is proportional to inductance, the calculation of winding inductance is of central importance. By comparison with experimental and analytical values, it is shown that proposed analytical expression is able to effectively predict the winding inductance of single-phase brushless DC machines at the design stage.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.25-30
• /
• 2017

Arago's disk system consists of a speed controller of the DC motor (inner loop controller) and a position controller of the magnetic bar angle (main controller), which are implemented by the design of the PI and PID controller, respectively. First, we analyzed the nonlinear characteristics of the Arago disk system and found the operating point range of three locations as a result. In this paper, a gain scheduler method was applied to guarantee a constant control performance in the range of $0{\sim}130^{\circ}C$, and a structure to change the controller according to the control reference value based on the previously obtained operating points was experimentally implemented. The Distributed Control Systems (DCS) configuration using the Controller Area Network (CAN) was used to verify the proposed method by improving the operational efficiency of the entire experimental system. So, simplicity of the circuit and easy diagnosis were achieved through a single CAN bus communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.10-19
• /
• 2018

In this paper, a new high-frequency equivalent circuit model of printed spiral coils (PSCs) for radio-frequency interference (RFI) measurement has been proposed. To achieve high-frequency modeling, the proposed model consists of distributed components designed based on the design parameters of the PSCs. In addition, an analytic model for PSCs based on T-pi conversion has been proposed. To investigate the feasibility of the proposed model for RFI measurement, the transfer function between a microstrip line and a PSC has been extracted by combining the proposed model and mutual inductance. The self-impedances of the proposed model and the transfer function have been successfully validated using three-dimensional field simulation and measurements, revealing noticeable correlations up to a frequency of 6 GHz. The proposed model can be employed for high-frequency probe design and RFI noise estimation in the gigahertz range wireless communication bands.