• Journal of Chest Surgery
• /
• v.18 no.1
• /
• pp.1-6
• /
• 1985

Isolated sinus node cells of the rabbit were used to assess the effects of extracellular Na, K, Ca and Mg concentrations on cardiac pacemaker activity. With intracellular glass micro-electrodes spontaneous action potentials of SA node were recorded and the effects of various ions and their blockers were analyzed in terms of the cycle length, the amplitude and the duration of action potentials, the results obtained were as follows. 1. Sodium reduction [up to 30%] decreased the amplitude of action potential and lengthened the cycle length. TTX, specific blocker of Na channel slightly lengthened the cycle length. 2. Increasing potassium ion concentration, the duration of action potential decreased and the frequency increased in 6mM, however, spontaneous action potential was stopped in 24 mM. Barium ion known to be decreasing K conductance increased the duration of action potential but no significant change in the cycle length was noticed. 3. Calcium ion has shortening effect on the duration and the cycle length of action potential but not with dose-dependent manner. Cadmium ion .[0.02mM] lengthened cycle length and the duration of action potential. 4. Increasing the concentration of magnesium ion the cycle length was lengthened, significantly.

• Korean Journal of Environmental Biology
• /
• v.22 no.4
• /
• pp.559-564
• /
• 2004

The effects of intra-peritoneal injection of inorganic mercury on haemato-logical parameters and hepatic oxidative stress enzyme activities were studied in common carp, Cyprinus carpio. The fish were injected thrice intra-peritoneally with mercuric chloride TEX>$(5,\;10mg\;Hg\;kg\;b.W.^{-1})$. After exposure of three different mercury concentrations a physiological stress response was exerted on C. carpio by causing changes in the blood status such as erythropenia in blood and oxidative stress in liver. Red blood cell counts, hemoglobin concentration and hematocrit level were reduced in most cases by inorganic mercury. Remarkable low level of serum chloride, calcium and osmolality were also observed in the mercury- exposed fish. However, serum magnesium and phosphate were not altered by exposure to mercury. An increased activity of hepatic glutathione peroxidase was observed in the lowest treatment group of carp $(1mg\;Hg\;mg\;b.w.^{-1})$, hence, hepatic catalase and glutathione peroxidase of carp exposed to higher concentration of mercury $(5,\;10mg\;Hg\;kg\;b.W.^{-1})$ showed significant reduction in such activities.

• Fisheries and Aquatic Sciences
• /
• v.20 no.3
• /
• pp.4.1-4.6
• /
• 2017

Juvenile Anoplopoma fimbria (mean length $16.8{\pm}2.2cm$, and mean weight $72.8{\pm}5.4g$) were exposed for 2 months with different levels of ammonia (0, 0.25, 0.50, 0.75, 1.00, and 1.25 mg/L). Growth performances such as daily length gain, daily weight gain, condition factor, and hepatosomatic index were significantly decreased by ammonia exposure. Hematological parameters such as red blood cell (RBC) count, hematocrit, and hemoglobin were also significantly decreased. In plasma inorganic components, calcium and magnesium were significantly decreased by ammonia exposure. In plasma organic components, there was no alteration in cholesterol and total protein. In enzyme plasma components, glutamic oxalate transaminase (GOT) and glutamic pyruvate transaminase (GPT) were significantly increased. The results of this study indicated that ammonia exposure can induce significant growth reduction and blood biochemistry alterations of A. fimbria.

• Journal of the Korea Furniture Society
• /
• v.27 no.2
• /
• pp.137-144
• /
• 2016

Wood plastic composite (WPC) is a green composite made of wood flour and thermoplastics to provide better performance by removing the defects of both wood and plastics. However, relatively low thermal stability and poor fire resistance of wood and plastics included in WPC have been still issues in using WPC as a building material for interior applications. This study investigated the effect of environmentally-friendly flame retardants (EFFRs) on the mechanical, thermal, morphological, and water absorption properties of wood flour (WF)/talc/polypropylene (PP) composites in comparison with neat PP. The whole EFFRs-filled WF/talc/PP composites showed higher values in flexural strength, flexural modulus, and impact strength compared to neat PP. In thermal properties, aluminum hydroxide (AH)-filled composite showed a $36^{\circ}C$ reduction in maximum thermal decomposition temperature ($T_{max}$) compared to neat PP, but magnesium hydroxide (MH) played an important role in improving thermal stability of filled composite by showing the highest $T_{max}$. From this research, it can be said that MH has potentials in reinforcing PP-based WPCs with improvement of thermal stability.

• Environmental Analysis Health and Toxicology
• /
• v.13 no.1_2
• /
• pp.19-26
• /
• 1998

In Korea, fluoride was first introduced into the drinking water of residents of Jinhae, KyungNam in 1981 for the prevention of dental caries. Ever since, growing numbers of communities favor fluoridation. The mechanism of F prevention of tooth decay is well known: fluoride ions substitute for hydroxyl ions in hydroxyapatite of hard tissues, which result in crystal perfection, with consequent reduction in dental caries. Soluble fluorides such as sodium fluoride are almost completely absorbed from the gastrointestinal tract. However, the presence of divalent or trivalent cations such as aluminum, magnesium, and calcium that can complex with F can reduce the degree of absorption. In U.S.A., over 7000 communities are now adding F to their drinking water. However, some portion of population oppose fluoridation, voicing both concern about the safety of fluoridation as well as for personal choice. Thus, This paper reviews the interaction of fluoride and cations as well as fluoride and suggests possible problems associated with fluoridation, a controversial issue.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.129-134
• /
• 2005

There is a strong industrial demand for the development of light-weight vehicle to improve fuel efficiency and dynamic performance. The effective method of achieving the weight reduction is to use low-density materials such as aluminum and magnesium. In applying these materials to the vehicle, it is often required to join dissimilar materials such as aluminum and steel. However, conventional joining method, namely resistance spot welding cannot be used in joining dissimilar materials. Self·piercing rivet(SPR) and adhesive bonding is a good alternative to resistance spot welding. In this study, the impact test of double hat-shaped member made by resistance spot welding, SPR and adhesive bonding was performed. As a result, various parameters of crashworthiness were analyzed and evaluated. Also, the applicability of SPR and adhesive bonding as an alternative to resistance spot welding was suggested.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.378-384
• /
• 2010

Regenerated cellulose was prepared from Buckeye wood pulp V60 via dissolution in N-methylmorpholin N-oxide (NMMO) solvent system. The effect of antioxidants such as, n-propylgallate (PG), tris(nonylphenyl) phosphite (TRIS), ethylenediamine tetraacetic acid disodium salt (EDTA), and magnesium sulfate on the properties of regenerated cellulose was studied using X-ray diffraction, copper index calculation, and viscometry. Only addition of more than 0.01% of PG into NMMO solvent was effective to avoid the reduction of the degree of polymerization(DP) of regenerated cellulose during dissolution at $110^{\circ}C$. However, the early stage(within 0.5h of dissolution process) degradation of cellulose was not prevented eventhough up to 0.5% PG was appled to hot NMMO system. In addition, to recover the expensive NMMO after cellulose regenerating process, the washing filtrate was studied using simple techniques, such as refractive index, pH, and conductivity measurements. Through conductivity measurement result, 4-time of washing was enough to remove the NMMO completely from regenerated cellulose.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.3-14
• /
• 2020

Titanium sponge is industrially produced by the Kroll process. In order to understand the importance of the emerging smelting and recycling process, it is necessary to review the conventional production process of titanium. Therefore this paper provides a general overview of the conventional titanium manufacturing system mainly by the Kroll process. The Kroll process can be divided into four sub-processes as follows: (1) Chlorination of raw TiO₂ with coke, by the fluidized bed chlorination or molten salt chlorination (2) Magnesium reduction of TiCl₄ and vacuum distillation of MgCl₂ and Mg by reverse U-type or I-type with reduction-distillation integrated retorts (3) Electrolysis process of MgCl₂ by monopolar cells or multipolar cells to electrolyze into chlorine gas and Mg. (4) Crushing and melting process in which sponge titanium is crushed and then melted in a vacuum arc furnace or an electron beam furnace Although the apparatus and procedures have improved over the past 80 years, the Kroll process is the costly and time-consuming batch operation for the reduction of TiCl₄ and the separation of MgCl₂.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.1
• /
• pp.54-60
• /
• 2008

Deactivation of SCR catalyst applied in Orimusion fuel power plant was investigated to develope the technique for the regeneration of deactivated SCR catalyst and optimize the operation of SCR facility. The characterization study of the catalysts was carried out using XRD, ICP-AES, SEM and EDS. The NO$_X$ removal activity and SO$_2$ oxidation activity of the catalysts were measured. The NO$_X$ conversion of the deactivated catalyst was 5$\sim$10% lower than that of the fresh catalyst and the value of SO$_2$conversion to SO$_3$ over the deactivated catalyst was about 0.59% higher than that of the fresh catalyst. Vanadium(V), Magnesium(Mg) and Sulfur(S) were largely accumulated in the deactivated catalyst. The accumulation of Vanadium(V) and Sulfur(S) is due to the components of the Orimulsion fuel and the accumulation of Magnesium(Mg) is due to MgO that is injected in the boiler to prevent the oxidation of SO$_2$ to SO$_3$. The diffraction line of the TiO$_2$ of the deactivated catalyst was identified as the crystalline peaks of anatase as the fresh catalyst.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.4
• /
• pp.311-317
• /
• 1983

These studies were carried out to investigate the effects of rice straw on the leaching of chemical constituents in paddy soil. Rice plants were cultured in paddy soil to which rice straw was applied and then chemical properties of percolated water were analysed. The results were as follows. The leaching of calcium and magnesium was affected by rice straw application in the early stages of plant growth and by rice root activity in the late stages. The application of the straw promoted the reduction of the soil followed by increasing the leaching of iron and manganese. The leaching of potassium, ammonium-nitrogen and chloride was not due to the application of rice straw and the leaching of carbon dioxide increased with the application of rice straw, at the same time chemical properties seemed to be affected by rice root activity. Generally, cation and anion leached in the percolated water were equivalent. Calcium, magnesium, Fe as cation and $HCO_3$, $SO_4{^{-2}}$ as anion were important constituents in the percolated water from paddy soil.