• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.440-445
• /
• 2003

Maglev is the vehicle which can run in levitated condition by the electro-magnets, and propelled by linear induction motors. The Maglev is divided in two parts such as carbody and bogies, and the bogies are the driving device of the vehicle. The frame of the bogie must endure many loads occurred in the operation of the vehicle. So the bogie frame is designed and manufactured in the view of good safety and maintainability. The methods of design of frames are developed in regards of stresses and weights of structures. In this research, the extrusion of bogie frame is re-designed by the process of topology optimization with the ANSYS. By this process, the optimal shape of extrusion is acquired and additional optimization researches would be required in the view of size and shape of the members in the extrusion.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.364-371
• /
• 2008

In general Maglev (magnetically levitated vehicle) has about 4 or 5 bogies per one vehicle to improve stability of electromagnetic suspension and 4 air-spring per one bogie are to be equipped to prevent form excessive yawing and pitching motion of bogie. 3 leveling valve per one vehcile will be applied to control the height of carbody. This kind of vehicle is on the design stage, and design review will be carried out before manufacture. The suspension system of Maglev consists of 16 of air-spring, auxiliray reservoir and orifice, 3 leveling valve, which are different composition comparative to conventional rolling stock. To improve operational reliability of vehicle, additional ventilation valve will be equipped with airspring. This kind of new design concept requires fundamental design review. In this study, suspension systems of Maglev will be built as mathematical model. Then designed suspension system will be reviewed in view of various points through proposed suspension simulation.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.278-282
• /
• 2010

Since a power supply substation of the magnetic levitation train system includes a inverter which is necessary to change the frequency of power, it has a different characteristic comparing to any other railway system. Nowaday a study for determining rating of facilities constituting a power supply system and modeling that system is undergoing. In this paper, a analysis model for the power supply system of the magnetic levitation train using the 3-level inverter is proposed. And the analysis for output characteristic is performed using the PSCAD/EMTDC program. The control method about the output of 3-level inverter for supplying power to loads in magnetic levitation train system is also described.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2342-2347
• /
• 2011

This paper introduces the performance test of the prototype vehicle, which will be in operation for Urban Maglev Program. While common trains with steel wheels use rotary induction motors for propulsion, maglev trains gain thrust force from linear induction motors maintaining the constant airgap with levitation electromagnets. Therefore, not only the behavior of the linear induction motor should be well understood, but also the way of propulsion that minimizes its effect on the levitation system should be took into account. Performance test procedures of maglev trains are proposed and carried out, and the characteristics of acceleration and deceleration are verified to agree with the design criteria. Tests are mainly performed on the linear section of the test line, and the driving characteristics on the section with a 6‰ incline are examined additionally. As a result, the performance of the prototype vehicle in the reverse operation can satisfy the requirement about the acceleration and deceleration, 4.0$m/s^2$. And, the design modifications of the commercial vehicle and the performance specifications required on the demonstration line are investigated.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1454-1460
• /
• 2009

Ultra-speed tube train, which runs in vacuum atmosphere to overcome aero-dynamic dragging force, is considered as a high-speed ground transportation system to back up long-distance air travel. To realize the ultra-speed tube train, feasibility study of currently available Maglev technologies especially for propulsion and levitation system is needed. Propulsion by linear synchronous motor(LSM) and levitation by electro-dynamic suspension(EDS) which are utilized in the Japan's MLX system could be one of candidated technologies for ultra-speed tube train. In the LSM-EDS system, the key component is superconducting magnet, and its reliability and performance is very important to guarantee the safe-operation of Maglev. As the initiative of the feasibility study, this paper deals with the basic structure of superconducting magnet and core technologies to design and operate it. And by surveying the current R&D achievement in Korea, the nation's capability to develop advanced superconducting magnet for Maglev is presented.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.24-30
• /
• 2008

One of the characteristics of the Maglev Train is the prominent capability of upgoing. Maglev train with the aim of longitudinal slope 7/100 is under development by the Center for Urban Maglev Program in Korea. To realize these slope, vertical curves must be inserted before and after the slope. The inserted curve has the radius of 3,000m generally. The insertion of these vertical curve results in the additional differences between the girder upper face and the guide rail, and the alignments are controlled by cast in place concrete at present. In this study, for longitudinal curved route with longitudinal slope 6/100, the applicability of PSC-U type girder and precast deck was evaluated for the span length 25m, 30m and vertical curve radii with 3,000m and 1,500m with respect to longitudinal slope 6/100.

• Journal of the Korean Society for Railway
• /
• v.2 no.3
• /
• pp.5-7
• /
• 1999

Ten years have passed since my last visit to Korea on the occasion of the International Symposium on High Speed Rail Systems organized by the Korean Transport Institute in October 1989. At that time, it was the objective to introduce the maglev and VHSR (very high speed rail) systems with their different areas of application and to discuss them with local partners against the background of the Seoul-Pusan HSR project. Congratulations on the success of the Centennial seminar. I am much pleased to be invited to the memorable seminar and I would like to express my sincere gratitude to Korean members' hospitality. (omitted)

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1191-1198
• /
• 2011

The railway business was began at England in 1767. Since then, it has been changed for configuration of rail over the years and made in the form of I. The train propulsion has been developed in a engine of steam, diesel, motor, electromagnetic force and a pneumatic engine, continuously. also, the friction has been improved in a steel-wheel, rubber tire, frictionless maglev system and railless system. In consequence, the efficiency and improvement speed for train have been accomplished. In this paper, it is investigated for the structure with lightweight using the change for supporting the form of lateral pressure by centrifugal force in the substructure supporting load for railway vehicles.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1118-1125
• /
• 2010

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC standard62279 which is commonly applied to railway system for Automatic Train Control(ATC) system in accordance with Urban Maglev project. This also shows approach methods and relative activities for project life-cycle to accomplish and ensure the system requirements of ATC system, RAMS and S/W quality activities. Furthermore, the key tasks conducted with ISA are noted in detail. These kind of activities for software quality of ATC system to obtain Safety Certificate could be a CASE model to improve the quality of domestic railway system and products, and also contribute to the growth of railway business and toward the achievement of overseas' railway signaling markets.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1676-1682
• /
• 2008

The vertical curve of railway is installed in changing point where the gradient is more than a certain degree to ensure safe operation of train and comfort of passengers. As a result of CAD work with 3D coordination by using the existing equation, it was found that the simple equation about vertical curve installation suggested in the surveying engineering or railway regulations did not reflect theoretical curvature of circular curve in a case of steep grade and large vertical radius. In this study, for derive precision equation and transition curve about vertical curve, gradient parameters, equation of circles and transition curve equation were used, and it was verified by CAD that the derived equation is exactly satisfied with parameters of geometrical circular and transition curve. This equation could be used to provide more smoothing operation of train and comfort of passengers on vertical curves, especially in case that railway requires precision vertical alignment of track such as super high-speed railway, LRT or Maglev system.