• Journal of Institute of Convergence Technology
• /
• v.6 no.1
• /
• pp.27-30
• /
• 2016

In recent years, manufacturing industry takes a lot of significant change - such as Industry4.0, SMART factory, and IoT(Internet of things). To satisfy their requirements, many cutting-edge machineries are provided to enhance manufacturing industry's productivity. Also, IT technologies are applied to many machinery part and improve their functions. In Korea, Chung-buk plays an important role in machinery part industry. In this paper, we survey, analyze and summarize the current machinery part industry focused on Chunk-buk Area.

• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.41-46
• /
• 2016

Based on Regional Industry Development Plan in 2014, machinery part industry and medical instrument industry has been designated as core industries of Chung-buk area. Machinery part industry plays an important role in economic growth of chung-buk area and it has been faced with signigicant changes - such as SMART factory and IoT(Internet of things). Also, medical instrument industry with 3D printing technology grows rapidly in Chung-buk area. It is believed that medical instrument could be next cash-cow items for Chung-buk area. In this paper, we survey, analyze and summarize the current machinery part industry and medical instrument industry focused on Chunk-buk Area.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2018

Aloe gel layer is well known as raw materials of medicines and cosmetics due to their antioxidant and anti-inflammatory properties. In aloe gel extracting process, the outer part of the leaf was removed. It contains high quality of fiber and many nutrients. However, this part is thrown away and generally used as fertilizer. The purpose of this research was to examine the important nutrient of Aloe saponaria. Moreover, the feasibility of using aloe as a dietary supplement by feeding fermentation treatment of aloe was investigated. To do this, the aloe leaf was divided into several parts including leaf skin, bottom of the leaf, tip of the leaf, middle of the leaf, and leaf flesh. Then the saponin content were analyzed from each part. The extraction method was used to clarify the saponin content. The aloe then fermented to improve it benefit. The fermented Aloe then given as dietary food to group of pig. Finally, the appropriate feed level was determined and the pork meat quality was analyzed. The extraction of saponin shows that the highest concentration of saponin located on the skin of the leaf. The feeding experiment shows that there is no significant difference in pig growth without aloe dietary food and groups with aloe as dietary food. It was conclude that fermented aloe can replace the pigs normal feeder as an alternative feeding solution.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_1
• /
• pp.897-906
• /
• 2020

This research focuses on the physicochemical characteristic of fermentation of Aloe Saponaria. The fermentation process applied in this study had 2 variation, depends on the aloe part as the materials (bottom, middle, and tip) and the initial sugar content (24% and 0%) used. Tests are conducted using uinkin fermented powder, sugar, salt, and distilled water as fermenting agent. The results indicate that change in physicochemical properties of aloe's skin was larger than in aloe's gel as fermentation materials. In contrast, there was no significant change in aloe's leaf during the process. A lso, aloes with intial sugar condition of 24% show better results than which without sugar addition in fermentation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.59-62
• /
• 2003

The precision cold forging of helical gear for steering pinion has been studied. Because of the large helix angle, there are many difficult problems to control the material flow and part dimension. The die shape was proposed to improve the flow of workpiece. In order to improve the dimensional accuracy of forged part, a FE analysis was performed. The proposed die shape drives to flow amicably workpiece. The applied load was reduced up to 10 percent, compared to the conventional-shaped-die. The elastic deformation of die has been investigated quantitatively by the 3-dimensional FE analysis. The die-land has been expanded up to $10{\mu}m$ on loading stage, based on the FEM results. Therefore, the elastic deformation amounts should be taken into consideration to improve the dimensional accuracy of forged helical gear.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.3
• /
• pp.7-11
• /
• 1992

Accurate measurement of green density of compacted part in the powder metallurgy industry is rather fundamental but extremely important process that decide the quality of the sintered part. In case of green sheet P/M product, the green density as well as the distribution of the density must be examined for the same reasons. Currently in most cases, density measuring process is being performed applying conventional Archimedes principles. However this method is not only time-consuming but also often inaccurate because of the inherent nature of the process, such as part sectioning, closing of surface porosity with wax and weighing in air and in water. Therefore, it is necessary to develop a faster and more accurate method to measure the density of green sheet P/M product. In this work, a nondestructive density measurement device using gamma-ray absorption principles was constructed and the optimum condition for measuring green density of P/M sheet and its distribution was sought. The results showed that this method was very effective in terms of measuring time and accuracy.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.195-201
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, several kinds of combined wire screen meshes were used. The results are summarized as follows; The packed meshes with high mesh no. in the side of heater part of regenerator showed effective than the packed meshes with low mesh no. in the side of cooler part of regenerator. The temperature difference and pressure drop of the regenerator were not made by the specific surface area of wire screen meshes but by the minimum free-flow area to the total frontal area. Among the No. 150 single screen meshes, 200-60 combined meshes, the 200-150-100 combined meshes showed the highest in effectiveness.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.819-825
• /
• 2021

In the industry, the use of lightweight bearings is increasing to minimize motor power loss, and in particular, the application of next-generation systems such as robots and drones is increasing. Bearing manufacturers are producing lightweight bearings by changing the bearing material, but related researches is insufficient. In this paper, life test and structural analysis were performed for lightweight bearings, and shape parameters and scale parameters were derived based on the life test results. It was confirmed that the shape parameter was 2.52 and the scale parameter was 164 hours. As a result of calculating the dynamic load rating based on the B₁₀ life, it was confirmed that the dynamic load rating of the lightweight bearing was 7% compared to the formula suggested by ISO 281. The reason is that the material of the retainer, which is a major failure part, is a polyamide 66 series that reacts sensitively to heat, so It is judged to show a lot of difference from the ISO 281 calculation formula.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.24-29
• /
• 2020

In South Korea, agricultural mechanization has been carried out in paddy field, but not in the upland field during recent decades. Among crops such as root vegetables, leafy vegetables from upland field, corn is used as forage for livestock as well as food for men. The corn harvester needs to be developed to replace men's labor in rural area to follow the recent needs in the farm industry. The corn harvester is comprised of three parts such as cutting part, feeding part and pick-up part. The feeding part is so long for cut corns to be delivered from the cutting part to the pick-up part. Structurally, the load from the long moment arm is likely to be big. Thus, the setup to measure the stress on the duct of the feeding part was configured with the data acquisition system. The strain gages were attached on several points that seem to be loaded a lot comparatively. The stress was measured and the measured stresses were divided by the yield stress to get the safety factor. And then, we made sure the safety factors were above 1 on the all points. In conclusion, the feeding part of the corn harvester which convey the cut corn from the cutting part from the pick-up part can be regarded to be made safe structurally.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.117-128
• /
• 1996

Plant is production unit which consists of hardware for manufacturing like machinery, equipments and software for its installation like design, construction, supervision, engineering, know-how and trial operation. In the view of this, plant industry can be defined as an aggregation of manufacturers and sellers of plant. In this study, I would like to present the direction of cooperation for mutual benefit of Korea-Japan by understanding international competitive power of both countries' plant industry, which is not only growing as a national strategic industry, but also occupying the most important part in international economic cooperation.