• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.120-126
• /
• 2004

This study proposed the analysis of mass position detection due to the change of the mass and strifeless of structure by using the original and modified dynamic characteristics. The method is applied to examples of the cantilevers beam and the 3 degrees of freedom system by modifying the mass. The predicted detection of the mass positions and magnitudes are in good agrement with the present study from the structural reanalysis using the modified mass.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.72-77
• /
• 2016

Airplane reservoirs made of Al7075 are coated with an anodizing layer to maintain precision, air tightness and corrosion resistance. It is commonly required that the inner surface roughness of the reservoir be less than an average $0.2{\mu}m$ to maintain stable oil pressure. Even though precision polishing is necessary to achieve this quality it is not easy. Inner surface roughness is not uniform and the quality of the product is irregular because most of the work is done by hand. The purpose of this study is to design an exclusive polishing machine and to determine the standard cutting condition and polishing condition necessary for good inner surface roughness and to improve workefficiency.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.23-26
• /
• 1997

In exposuring x-rays, we can adjust three variables of kVp, mA and sec. The kVp is one of main factors affecting x-ray quality -peneterability. And miliampere-seconds is directly proportional to x-ray quantity. In this paper, we detected voltage variation of CdS, II-VI group semiconductor compounds, by kVp as the fundamental experiments of designing x-ray dosimeter. We exposured x-ray on the material from 40 to 100 kVp by increasing 2kVp using Shimadazu TH-500-125 Radio-Tex cx-s x-ray machine. We fixed miliampere -seconds to 100mA and 0.2 sec. After acquiring the raw data, we plotted the graph of kVp and voltage variation and figured slope value of 0.093 by regression. The standard deviation of voltage to kVp was 0.22. For the future study, the mAs variation study will be needed to investigate the connections between kVp and mAs in order to design x-ray dosimeter.

• Journal of Technologic Dentistry
• /
• v.37 no.2
• /
• pp.57-62
• /
• 2015

Purpose: This study was performed to investigate mechanical properties of the porous Ti implants according to porosity. Porous Ti implant will be had properties similar to human bone such as microstructure and mechanical properties. Methods: Porous Ti implant samples were fabricated by sintering of spherical Ti powders(below $25{\mu}m$, $25{\sim}32{\mu}m$, $32{\sim}38{\mu}m$, and $38{\sim}45{\mu}m$) in a high vacuum furnace. Specimen's diameter and height were 4mm and 40 mm. Surface and sectional images of porous Ti implants were evaluated by scanning electron microscope(SEM). Porosity and average pore size were evaluated by mercury porosimeter. Young's modulus and tensile strength were evaluated by universal testing machine(UTM). Results: Porosity of Implant was increased according to larger particle size of the powder. Boundary portions of particles are sintered fully and others portions were formed pore. Young's modulus was decreased by formed porous structure. Tensile strength was decreased according to larger the particle size of the powder, but higher than human bone. Conclusion: If prepared by adjust the porosity of the porous Ti implant will be able to resolve the stress shielding phenomenon.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.445-450
• /
• 2017

It is necessary to set a route to reflect the traffic flow for the safety of the traffic vessels. This ongoing analysis is needed to ensure that the vessels comply with a route. The purpose of this study is to discover the problems of the recommended route vicinity for Wando Harbor and suggest an improvement plan. We used a support vector machine based on the ship's trajectory to establish an efficient route center line. Since the vessels should navigate to the starboard side, with reference to the center line of the recommended route, the trajectories of the vessels were divided into two clusters. The support vector machine is being used in many fields such as pattern recognition, and it is effective for this binary classification. As a result of this study, about 79.5 % of the merchant eastbound ships in a 2.4 NM distance to Jangjuk Sudo did not observe the recommended route, so the risk of collision always existed. The contraflow traffic rate of the route of the eastbound ships decreased from 79.5 % to 30.9 % when the recommended route was reset about 300 meters to the north, from its present position. The support vector machine applied in this study is expected to be applicable, to effectively set the route center line because the ship trajectories can be classified into two clusters.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.185-190
• /
• 2015

This paper presents a new method to determine sensitivity coefficients of temperature and humidity of torque transducers by using a natural and seasonal variation of ambient conditions at the laboratory. We had measured the sensitivities of the torque transducers over almost one year using the KRISS 2 kN m torque standard machine. The sensitivity data acquired at various ambient conditions were processed using our measurement model to extract the sensitivity coefficients of temperature and humidity simultaneously with high precision. A comparison with a previous method using an environmental control chamber was carried out to test the feasibility of using our new method. Two results agreed within the uncertainty. We revealed that the torque measuring errors could be 8 times higher than the measurement and calibration capability of KRISS torque standard machine if the sensitivity changes due to the temperature and humidity are not properly corrected during a calibration.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.287-294
• /
• 2001

The geometrical and physical properties of red peppers were studied for proper design of a red pepper processor. Mass, volume, roundness and compactness of red peppers were calculated from digital images. They were compared with real data and the relations of them were suggested. Roundness of red peppers was ranged from 0.2 to 0.5 and the average value was 0.349. Compactness of red peppers was ranged from 25 to 50 and the average value was 37.1. The regression equations to calculate the volume and mass of red pepper were obtained as y$\_$v/$\_$=/0.553$\varkappa$$_1$+1.441$\varkappa$$_2$-1.013$\varkappa$$_3$(R=0.95) and y$\_$m/=0.252$\varkappa$$_1$+0.938$\varkappa$$_2$-0.499$\varkappa$$_3$-1.5112 (R=0.93), y$\_$v/:volume(㎤), y$\_$m/:mass(g), $\varkappa$$_1$: perimeter(cm), $\varkappa$$_2$: area(㎠), $\varkappa$$_3$: length of major axis(cm), respectively. The direction for aligning the red pepper in a machine processing was easily and perfectly recognized. The response time for digital image processing has to be reduced for more efficient operation. HSI and YIQ values could be useful for recognizing the red pepper from background.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.181-187
• /
• 2003

This paper presents an 125MHz, 128-phase phase-locked loop using interpolation technique for digital timing recovery. To reduce the power consumption and chip area, phase interpolation was performed over only selected windows, instead of overall period. Four clocks were used for phase interpolation to avoid the output jitter increase due to the interpolation clock (clock used for phase interpolation) switching. Also, the output clock was fed back to finite-state machine (FSM) where the multiplexer selection signals are generated to eliminate the possible output glitches. The PLL implemented in a $0.25\mu\textrm{m}$ CMOS process and dissipates 80mW at 2.5V supply and occupies $0.84\textrm{mm}^2.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.159-167
• /
• 2020

In actual battlefield environment, IFF radar plays an important role in distinguishing friend or foe targets and assigning unique identification code to management. Performance of IFF radar is greatly affected by radio environment including atmosphere and terrain, target maneuvering and operation mode. In this paper, M&S tool is consisted of interrogator(IFF radar) and answering machine(target) for radar performance analysis. The wave propagation model using APM(Advanced Propagation Model) and radar actuator system were modeled by considering beam waveform of individual operation beam mode. Using this tool, IFF radar performance was analyzed through two experimental results. As a result, it is expected that performance of IFF radar can be predicted in the operational environment by considering target maneuvering and operation beam mode.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.201-209
• /
• 2003

For the purpose of research study, a vertical shaft of 98m in length and 3.05m in diameter was constructed in the layer of conglomerate by using the Raise Boring Machine (RBM). In order to estimate the net penetration rate of the RBM, which can be used in the stage of design, the in-situ test results were analysed and correlated to data from the boring log in situ and laboratory testing. Its average net penetration rate is 2.233mm/rev while its average advance rate is 0.382m/hr, which is lower than that of TBM(Tunnel Boving Machine). It turns out that the net penetration rate increases with the increase of strength characteristics in rock mass (e.g., uniaxial compression strength, tensile strength, etc.). Similarly, the net penetration rate increases linearly with the hardness of rock mass. These results are contrary to the results of the previous construction sites where the TBM was generally used in the layer of hard rock. However, the trend obtained in this study is in accordance with the findings of Barton suggesting the relationship between Q$_TBM$ and penetration rate in the layer of soft rock. Thus, the trend is valid in soft and/or weathered rocks.