• Korean Journal of Weed Science
• /
• v.17 no.4
• /
• pp.439-444
• /
• 1997

The causes of late establishment of barnyardgrass and their density effect on rice yield loss were examined in 1996 and 1977. Herbicide application on 5 to 15DAT(Days after transplanting) increased from 6% to 52.5%, 1988 to 1992, and their ingredient amount for barnyardgrass control decreased to 41.7-87.5% in Korea. Most late establishment of barnyardgrass in machine transplanted rice field were not late germinated but revived ones. The number of late established barnyardgrass were 0.5, 2.0 and 13.3/$m^2$, on direct seeded at May 10, and machine transplanted May 23 and June 9, individually. Relation on rice yield and the number of barnyardgrass at machine transplanted field showed highly significant equation, as y=543.3 4.7x, r=0.9039 in 1996 and y=515.8 10.4x+0.066$x^2$, $R^2$=0.9532 in 1997. Theoritical yield loss by regress equation showed 2% per one plant of barnyardgrass per $m^2$ and 5, 10, 20, 50, and 80 plants of barnyardgrass decreased rice to 10, 19, 35, 69 and 79%, individually.

• Journal of the Korean Vacuum Society
• /
• v.14 no.1
• /
• pp.35-39
• /
• 2005

In the UV-NIL process using an elementwise patterned stamp (EPS), which includes channels formed to separate each element with patterns, low-viscosity resin droplets with a nano-liter volume are dispensed on all elements of the EPS. Following pressing of the EPS, the EPS is illuminated with UV-light to cure the resin; and then the EPS is separated from several thin patterned elements on a wafer. Experiments on UV-NIL were performed on an EVG620-NIL. 50 - 100nm features of the EPS with 3m channels were successfully transferred to 4 in. wafers. Especially, the wafer deformation during imprint was analyzed using the finite element method (FEM) in order to study the effect of the wafer deformation on the UV-NIL using EPS.

• Journal of Technologic Dentistry
• /
• v.38 no.2
• /
• pp.63-68
• /
• 2016

Purpose: The purpose of this study was to assess the internal fitness of the PMMA 3-unit bridge that was fabricated with 5-axis milling machine and to verify the clinically allowable values. Methods: For fabrication of the crown bridge in this study, 25-27 abutment teeth were used. The prepare abutment teeth were scanned with a scanner and 3-unit bridge was designed by using design software. Upon the completion of the design, the 3-unit bridge was fabricated by using a PMMA block with 5-axis milling machine. The internal surface of the fabricated 3-unit bridge was scanned by using a scanner and the difference between the 3-unit bridge and the abutment teeth was assessed by merging them together. Results: $RMS{\pm}SD$ values for PRE group, MOL group, and BRI group were $51.2{\pm}18.2$, $44.8{\pm}10.0$, and $52.1{\pm}8.3{\mu}m$, respectively. The mean of the PRE group was bigger than that of the MOL and BRI group; however, statistically significant difference was not found (p>0.05). Conclusion: The PMMA 3-unit bridge that was fabricated with 5-axis milling machine presented stable internal values for each crown and overall internal values were within the range of clinically allowable values.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.29-41
• /
• 1998

Despite orthodontic treatment(tooth moving) is dynamic act many orthodontists have used mainly static evaluation method for evaluating effectiveness of the orthodontic appliances. They want to find which is better appliance, especially in the treatment results and treatment period when they chose one appliance from sugessted appliances for obtaining same treatment goal. The author and colleagues invented and manufactured new machine for getting information about the relative effectiveness from many suggested orthodontic appliances and we named it Calorific machine. We used this Calorinc machine to find the relative differences about tooth moving mechanism and tooth moving time between the Burstone's PLA(single force mechanism) and Molar-up's PLA(couple mechanism) for correcting the posterior cross bite. We measured the distance of tooth moving on the occlusal X-ray film and recorded the moving time of the anchored(control elctro-thermal tooth) and lingually tipped lower second molars(experimental electro-thermal tooth) and then processed paired t-est by SAS program. The results were as follows. 1. Molar-up's PLA showed more extrusive and horizontal movement than Burstone's PLA at the lingually tipped molar(p=0.0000). 2. There is no finding of tooth movement by Molar-up's PLA at the uprighted molar(p=o.3475) but Burstone's PLA showed a little change(0.2 m) at the same molar(p=0.0001). 3. Burstone's PLA took 17.8 minutes for tooth moving but Molar-up's PLA took only 3.8 minutes(p=0.0001)

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.47-52
• /
• 2017

This study is BIT(: Bus Information Terminal) features that take advantage of KEPCO eIoT(: energy Internet of Thing) platform, and it's Network configuration is composed of display terminal device, gateway, platform, and the service server. The key features are parts for processing protocol data between the gateway and the device using LoRa(: Long Range) technology, Intelligent applications and SIP(: Session Initiation Protocol) data handling connected to the Taxi reservation system. And the resource tree provided BIT for the service, which commonly used in the application server and the device.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1107-1112
• /
• 2016

This study is the Smart Office features that take advantage of KEPCO eIoT(: energy Internet of Thing) platform, and it's Network configuration is composed of sensing device, gateway, platform, and the service server. The key features are parts for processing protocol data between the gateway and the device using LoRa(: Long Range) technology, Intelligent applications and public safety data connected to the PS-LTE(: Public Safety-Long-Term Evolution) system. And the resource tree provided Smart Office for the service, which commonly used in the application server and the device.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.823-832
• /
• 1987

This pper presents a method for constructing multiple-valued logic sequential machines based on Galois field. First, we assign all elements in GF(2**m) to bit codes using mathematical properties of GF(2**m). Then, we realized the sequencial machine circuits with and withoutm feed-back. 1) Sequential machines with feed-back are constructed by using only MUX from state-transition diagram expressing the information of sequential machines. 2) Sequential machines without feed-back are constructed by following steps. First, we assigned states in state-transition disgram to state bit codes, then obtained state function and predecessor table explaining the relationship between present states and previous states. Next, we obtained next-state function from state function and predecessor table. Finally we realized the circuit using MUX and decoder.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.2
• /
• pp.33-36
• /
• 2009

A 1 MW class HTS (High-Temperature Superconducting) synchronous motor has been developed. This motor is aimed to be utilized for industrial application such as large motors operating in large plants. The HTS field coil of the developed motor is cooled by way of neon thermo siphonmechanism and the stator (armature) coil is cooled by water through hollow copper conductor. This paper also describes evaluation of some electrical parameters from performance test results of our motor, which was conducted at steady state in generator mode and motor mode. Open and short circuit tests were conducted in generator mode while a 1.1 MW rated induction machine was rotating the HTS machine. Electrical parameters such as mutual inductance and synchronous inductance are deduced from these tests. Load test was done upto rating torque during motor mode and efficiency was measured at each load torque.

• Journal of Technologic Dentistry
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2018

Purpose: The purpose of this study is to evaluate the trueness and fitness of machined prostheses according to drill radius setting in CAD software. Methods: For this study, standard abutment were replicated in Type IV stone. The stone abutment were scanned using a dental scanner. The CAD design software was designed using scanned abutment data. When designing, the drill radius was set to 0.3 mm and 0 mm, respectively, and saved. The saved design data was milled using a milling machine (n=13). The inner surface of the milled crown was scanned. The trueness and fitness were measured using the inner scan data of prostheses. Independent t-tests were performed to identify significant differences in each data. Results: Trueness values of the data saved with 0.3 mm and 0 mm drill radius were $18.9{\pm}2.3{\mu}m$ and $19.1{\pm}0.9{\mu}m$, respectively. There was no statistically significant difference between the groups. Fitness values of the data saved with 0.3 mm and 0 mm drill radius were $65.5{\pm}0.8{\mu}m$ and $33.8{\pm}1.0{\mu}m$, respectively. There was a statistically significant difference between the groups (p<.05). Conclusion : Setting the drill radius is important to produce clinically good fit prostheses.

• The Journal of Society for e-Business Studies
• /
• v.25 no.2
• /
• pp.15-27
• /
• 2020

This study starts with the idea that the process of creating a Gantt Chart for schedule planning is similar to Tetris game with only a straight line. In Tetris games, the X axis is M machines and the Y axis is time. It is assumed that all types of orders can be worked without separation in all machines, but if the types of orders are different, setup cost will be incurred without delay. In this study, the game described above was named Gantris and the game environment was implemented. The AI-scheduling table through in-depth reinforcement learning compares the real-time scheduling table with the human-made game schedule. In the comparative study, the learning environment was studied in single order list learning environment and random order list learning environment. The two systems to be compared in this study are four machines (Machine)-two types of system (4M2T) and ten machines-six types of system (10M6T). As a performance indicator of the generated schedule, a weighted sum of setup cost, makespan and idle time in processing 100 orders were scheduled. As a result of the comparative study, in 4M2T system, regardless of the learning environment, the learned system generated schedule plan with better performance index than the experimenter. In the case of 10M6T system, the AI system generated a schedule of better performance indicators than the experimenter in a single learning environment, but showed a bad performance index than the experimenter in random learning environment. However, in comparing the number of job changes, the learning system showed better results than those of the 4M2T and 10M6T, showing excellent scheduling performance.