• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.89-93
• /
• 2015

Purpose: Machine vision-based image processing methods can be useful for estimating the fresh weight of plants. This study analyzes the ability of two different image processing methods, i.e., morphological and pixel-value analysis methods, to measure the fresh weight of lettuce grown in a closed hydroponic system. Methods: Polynomial calibration models are developed to relate the number of pixels in images of leaf areas determined by the image processing methods to actual fresh weights of lettuce measured with a digital scale. The study analyzes the ability of the machine vision- based calibration models to predict the fresh weights of lettuce. Results: The coefficients of determination (> 0.93) and standard error of prediction (SEP) values (< 5 g) generated by the two developed models imply that the image processing methods could accurately estimate the fresh weight of each lettuce plant during its growing stage. Conclusions: The results demonstrate that the growing status of a lettuce plant can be estimated using leaf images and regression equations. This shows that a machine vision system installed on a plant growing bed can potentially be used to determine optimal harvest timings for efficient plant growth management.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.431-438
• /
• 2022

In functional materials, in situ experimental techniques as a function of external stimulus (e.g., electric field, magnetic field, light, etc.) or changes in ambient environments (e.g., temperature, humidity, pressure, etc.) are highly essential for analyzing how the physical properties of target materials are activated/evolved by the given stimulation. In particular, in situ electric-field-dependent X-ray diffraction (XRD) measurements have been extensively utilized for understanding the underlying mechanisms of the emerging electromechanical responses to external electric field in various ferroelectric, piezoelectric, and electrostrictive materials. This tutorial article briefly introduces basic principles/key concepts of in situ electric-field-dependent XRD analysis using a lab-scale XRD machine. We anticipate that the in situ XRD method provides a practical tool to systematically identify/monitor a structural modification of various electromechanical materials driven by applying an external electric field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.223-229
• /
• 1996

To investigate the effect of seeding date, seeding rate, and sprouted seeds on seedling establishment, yield and its components of rice in barley /rice reley cropping as a minimum tillage, Gancheokbyeo rice seeds sowed by hand broadcast in various overlapped days befer barley harvest. The highest rice seedling stand was at sowed on the day just before barley harvest and l00kg per hectare of seeding rate with sprouted seeds. Also number of tiller and panicle showed the similar tendency. Delayed rice heading dates were found 2 days at l0-day overlap, 2 days at 5-day overlap, and 4 days at 0-day overlap before barley harvest compared with machine transplanting rice at just after barley harvest using l0-days old seedling. The culm length of broadcast rice shortened 2∼4cm compared with the transplanting rice. The rice plants lodged slightly at seeding rate l00kg per hectare and at sowed on the day of barley harvest. The rice panicle number increased with later date sowing and higher seeding rate. Number of spikelets per panicle and ripened grains decreased at higher seeding rates. Sprouted seeds and higher seeding rates showed higher rice yield at later sowing dates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.70-74
• /
• 2008

To determine an optimum harvest time for chinese milk vetch (CMV) seed production, the seeds were harvested at 4 times, according to 25, 30, 35, and 40 day after flowering (DAF), in Miryang, southern part of Korea. CMV plants were manually harvested at each time and seed threshing was done by rice threshing machine. Seed yield, 1,000-seed weight, germinability, and hard coat ratio were investigated. Seed yield was the highest, 53.9 kg/300 kg by dry weight (DW) of CMV plant, at 35 DAF. 1,000-seed weight increased according to seed harvest time from 25 DAF to 40 DAF when it was 3.10 g. The germination ratios of seeds harvested at 4 times were not significantly different when the seeds stored until August 1. In case of long period of CMV seeds stored, the seeds harvested later showed higher germination rate. On the other hand, because the hard coat ratio causing germination inhibition was declined with an increase of storage period, it was higher in the seeds harvested later. There was no difference among the seeds harvested at 4 times at October 1. In conclusion, it was presumed that an optimum harvest time for CMV seed production should be at 35 DAF considering seed yield, weight and germinability.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.243-249
• /
• 1996

To formalize the mechanization technique so as to build up competitiveness on the international market, a detail survey of a 104ha size rice farm, was made. And calculated to find out how many machine of each calibre are needed. It was found that he needed : 3 farm tractors, 3 combines, 4 grain dryers, 1 speed sprayer, 100 man days of labor for sowing, application of fertilizer and herbicide, respectively. And also needed 150 man days for combine harvesting and 60 man days for disease and pest control. It was found also that well timed harvesting is critically needed to keep rice quality. Because, in case when harvesting machine was beakdown to make harvesting time extended, then the quality drops down very much and also the farm income fall very much. Therefore, it is recommended that the amount of machine needed should be prepared and they should be well maintained so that harvest be completed in time.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.177-188
• /
• 1997

A pepper harvester using a pair of counter rotating helically wound cylinders as a pepper removal mechanism has been developed. Pepper harvesting by machines under the customary cultivation practice was expected to lower land productivity, that most farmers were concerned about. As one way to compensate for loss in land productivity by machine harvest, experts on pepper cultivation suggested change of both varieties and plant density per area. From the view of machine design, their suggestion implied that distance between rows should be narrower and height of the pepper removal mechanism could be shorter. Experiments to improve perfect pepper recovery ratio and to reduce size of the pepper removal mechanism was accomplished. In order to be a economically feasible harvester, minimum pepper recovery ratio was required to be greater or equal to 80%. The research goal was achieved by both reducing the diameter of the wire-helices from 30 cm to 18 cm and increasing rotational speed of the wire-helices up to 425 rpm. The best perfect pepper recovery ratio was 82.3%. Validity of experiment design and interpretation on statistical analysis were discussed. To understand the pepper removal mechanism properly, a pepper removal theory based physics was judged to be necessary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.229-240
• /
• 2012

Advances in MEMS and CMOS technologies have motivated the development of low cost/power sensors and wireless multimedia sensor networks (WMSN). The WMSNs were created to ubiquitously harvest multimedia content. Such networks have allowed researchers and engineers to glimpse at new Machine-to-Machine (M2M) Systems, such as remote monitoring of biosignals for telemedicine networks. These systems require the acquisition of a large number of data streams that are simultaneously generated by multiple distributed devices. This paradigm of data generation and transmission is known as event-streaming. In order to be useful to the application, the collected data requires a preprocessing called data fusion, which entails the temporal alignment task of multimedia data. A practical way to perform this task is in a centralized manner, assuming that the network nodes only function as collector entities. However, by following this scheme, a considerable amount of redundant information is transmitted to the central entity. To decrease such redundancy, data fusion must be performed in a collaborative way. In this paper, we propose a collaborative data alignment approach for event-streaming. Our approach identifies temporal relationships by translating temporal dependencies based on a timeline to causal dependencies of the media involved.

• Food Science and Preservation
• /
• v.8 no.2
• /
• pp.140-145
• /
• 2001

Although the drying times of paddies were significantly shortened by the application of higher drying temperatures, the 12, 10 and 8 hours were needed for the reduction of moisture contents from 23.55 to 15% at the temperatures of 45, 50 and 55$\^{C}$, respectively. Milling yields(MY) and rice rates(HRR) were decreased by increasing of the drying temperature. The MY ratios were 75.50, 75.42 and 75.31% and HRR were 93.28, 92.14 and 91.12% in drying temperature of 40, 50 and 55$\^{C}$, respectively. In the milling processes of tough rice with the used of a milling machine equipped with both of abrasive and friction types in a body, the reduction rates of bran and the occurrence of broken rice increased with the pressures at outlet or the recycled passing tines. In the process for humidified friction whitening of rice, it was found that the optimum addition rate of water for the best quality was the 11.2 liters per tone of white rice.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.320-330
• /
• 2018

Purpose: The aim of this study was to investigate the harvesting performance of a prototype small combine for buckwheat and adlay. Methods: The prototype small combine was designed and constructed. Its ratio of grain loss, ratio of output components in the grain outlet, and field capacity for harvesting buckwheat and adlay were analyzed through field tests. Results: The prototype small combine required a working width of about 0.6 to 0.7 m to harvest buckwheat. The maximum travel speed was about 0.36 m/. The total ratio of grain loss was about 21.6%, which consisted of 8.8% at the header and 12.8% at the dust outlet. The grain and the material other than grain (MOG) ratios at the grain outlet were 94.1% and 5.9% respectively. In the case of adlay harvest, the maximum working width was about 1.2 m, that is, two rows. The range of maximum travel speed was about 0.45 to 0.46 m/s. When adlay was harvested in one row, the total ratio of grain loss ranged from 36.3 to 42.8% according to the cutting height. The cutting height of 30 cm resulted in a higher total ratio of grain loss than 60 cm and 90 cm. When the cutting height was 60 cm, there was no significant change in the total ratio of grain loss according to the number of working rows and the stage of the primary transmission shift. The total ratio of grain loss ranged from 35.2 to 37.7%. The grain and the MOG ratios at the grain outlet ranged from 93.1 to 95.8% and from 4.2 to 6.9%, respectively. No significant difference was observed in relation to cutting height, number of working rows, and the stage of the primary transmission shift. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops showed good potential for the efficient harvesting of buckwheat and adlay. However, to improve the harvesting performance, there seems to be a need to develop new crop varieties suitable for machine-based harvesting and improve the transmissions, reels, separation/cleaning systems.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.