• Journal of Biosystems Engineering
• /
• 제12권3호
• /
• pp.7-16
• /
• 1987

This study was carried out to develop a microcomputer-based data acquisition and control system which was able to collect the data of engine performance test automatically and control the speed and load of the engine. The results of the study are summarized as follows: 1. The signal processing devices, which were able to measure cylinder pressure, coolant temperature, compositions of exhaust gas, fuel consumption, engine rpm and torque etc., were developed. The results of calibration showed that all of devices had high accuracy ranging from 0.3% to 0.69% respectively. 2. The PIA (peripheral interface adapter) for interfacing digital signal and PTM (programmable timer module) for displaying real time every 0.0408 sec were designed and developed. 3. An engine-speed control system using a stepping motor and driver was developed. The control system had the stability, and faster settling time than the manual control system. 4. The automatic control system of electrical dynamometer, which was able to control the speed and load of dynamometer, was developed with a SSD (shackleton system driver) and D/A converter. 5. The computer programs, which were able to collect and process the data of engine tests, were developed using both the machine language and BASIC.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.620-623
• /
• 2002

Spinning has been used widely for the manufacture of hollow parts with rotational symmetry. With developing CNC machine, CNC machine center can be applied to the spinning processes. In this paper, a study on the development of CNC spinning technology without mandrel is carried out. The deforming process of the spinning process was simulated by DEFORM 3D to give basic design data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.744-747
• /
• 1997

High performance digital computer technology enables the digital computer-based controllers to replace traditional analog controllers used for factory automations. This replacement, however, brings up the side effects caused by discrete quantization and non-real-time execution of control softwares. This paper describes the structure of real-time simulator and controller that can be used for design and verification of real-time digital controllers. The virtual machine concept adopted by real-time simulator make the proposed simulator be independent from the specific hardware platforms. The proposed system can also be used in the loosely coupled distributed environments connected through local area network using real-time message passing algorithm and virtual data table based on the shared memory mechanism.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.288-290
• /
• 2006

This paper presents the real-time water tank wireless control in a ship using duplex RF modules and PLC(Programmable logic Controller). The purpose of this paper is developing HMI(Human Machine Interface) for automation equipments. The system can low a cost because long wires are no more used. Analog signals of the water gauge and flow meter are changed to discrete signals by the micro-processor. The PLC checks the volume of water and runs On or Off of the valve and pump. Duplex RF modules send and receive data between the water tank and control room. Everywhere the Internet is used, operators are able to check the status of the system by the web-server.

• 한국도서관정보학회지
• /
• 제18권
• /
• pp.217-243
• /
• 1991

Authority control enables us to retrieve information accurately by coordination and cross reference of headings. It is considered that authority control is needed in machine readable catalogs as well as in conventional catalogs. Taylor, Maxwell and Frost divided automated authority control systems into major vendor and network systems then available into two groups. The first group was defined as a system that processes a library's machine readable catalogs on the tape against an automated authority file. The second group offers an online access to catalogs and authority records. This group was further subdivided into linked or integrated systems and unlinked systems. If authority work is shared with many libraries the costs can be considerably reduced and the quality of catalog data base can be controled by standardization of headings used in participating libraries. The NACO is a project for sharing of authority records started in 1977 by L.C. And LSP furthers the ability to share authority records. A project as the NACO is necessary not only in America but also in the other countries The responsible organizations for national bibliographies of the countries must take much interest in these matters.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.193-199
• /
• 2000

Control system for cutting piston used in vehicle that is one of the 3D shape cutting using CNC lathe is presented. In order to cut the hybrid piston shape using CNC lathe, defined piston shape and change into machine code. The control software was developed for the high speed piston shape cutting. In this paper, the performance of this software was evaluated practically. As a result, the evaluated cutting precision was quantitatively compared with theoretical precision. Also the productivity and the quality by using CNC lathe with control software were evaluated those by using profiling.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.527-529
• /
• 1986

Measurement and control system of weld pool is comprised of optical devices, image processor, personal computer and welding machine. Combinations of ND and Infrared filters were used to block the intense arc light and to get the clearer image of weld pool. Smoothing operation and conversion to binary data were performed to eliminate the noises and to decrease the processing time. A simple algorithm for feedback control was developed and weld pool size is controlled by welding current which is adjusted automatically with personal computer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1145-1148
• /
• 1999

In this paper we developed the communication protocol in which can transmitter receive a data and instruction in pressure and control computer. This system can dramatically increase production by maximize by control the error in central unit and monitoring. When developed these pressure automatic control system, it can be automation product in factory and decrease man-power.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.97-103
• /
• 2001

Accuracy of a machined part is determined by the relative motion between the cutting tool and the workpiece. One of the important factors which affects the relative motion is the geometric errors of a machine tool. In this study, firstly, geometric errors are measured by laser interferometer, and the positioning error of each control point selected uniformly on the control surface CAD model can be estimated from th oirm shaping model and geometric error data base. Where a form shaping function is derived from the link of homogeneous transformation matrix. Secondly, control points are shifted to the estimated amount of positioning errors. A new control surface is modeled with NURBS(Non Uniform Rational B-Spline) surface approximation to the shifted control points. By generating tool paths to the redesigned control surface, we reduce the machining error quite.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제9권5호
• /
• pp.153-160
• /
• 2020

산업용 에너지 소비 예측은 에너지 수요와 공급에 동적이고 계절적인 변화가 있기 때문에 에너지 관리 및 제어 시스템에서 중요한 위치를 차지한다. 본 논문은 철강 산업의 에너지 소비 예측 모델을 제시하고 논의한다. 사용되는 데이터에는 후행 및 선도적인 전류 반응 전력, 후행 및 선도적인 전류 동력 계수, 이산화탄소(TCO2) 배출 및 부하 유형이 포함된다. 테스트 세트에서는 (a) 선형 회귀(LR), (b) 방사형 커널(SVM RBF), (c) Gradient Boosting Machine (GBM), (d) 무작위 포리스트(RF). 평균 제곱 오차(RMSE), 평균 절대 오차(MAE) 및 평균 절대 백분율 오차(ME)의 네 가지 통계 모델을 사용하여 예측하고 평가한다. 회귀 설계의 효율성 모든 예측 변수를 사용할 때 최상의 모델 RF는 테스트 세트에서 RMSE 값 7.33을 제공할 수 있다.