• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1003-1006
• /
• 2005

Vertex shader of GPU in personal computer is advanced in functions as to be half of traditional fixed T&L functions. And, capacity of memory for saving resources to process instructions is unlimited. GPU that can be programmed by programmer is needed for mobile system as well as personal computer. In this paper, we implement software virtual machine for vertex shader using C++ Language. Our goal is designing hardware GPU that can apply to mobile system. The virtual machine consists of nVidia GPU instructions. Input Data to virtual machine is generated by Microsoft fxc compiler. That is to say, Input Data is compiled shader program written in HLSL, Cg, or ASM. The virtual machine will be a reference model for designing hardware GPU and can be used for Testbed to test added or modified instruction.

• Annual Conference on Human and Language Technology
• /
• 2017.10a
• /
• pp.184-189
• /
• 2017

With the advent of robust deep learning method, Neural machine translation has recently become a dominant paradigm and achieved adequate results in translation between popular languages such as English, German, and Spanish. However, its results in under-resourced languages Korean and Vietnamese are still limited. This paper reports an attempt at constructing a bidirectional Korean-Vietnamese Neural machine translation system with the supporting of Korean analysis tool - UTagger, which includes morphological analyzing, POS tagging, and WSD. Experiment results demonstrate that UTagger can significantly improve translation quality of Korean-Vietnamese NMT system in both translation direction. Particularly, it improves approximately 15 BLEU scores for the translation from Korean to Vietnamese direction and 3.12 BLEU scores for the reverse direction.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.45-48
• /
• 1990

This paper deals with the control strategy for constant voltage, constant frequency (CVCF) generation of doubly-fed Induction generator. As induction machine is a nonlinear and multivariable machine, so, the influential factors for CVCF generation of induction generator are the magnitude of output voltage, load current and its power factor, slip of the machine, etc. To get appropriate control scheme and to research the effect of its parameters, the control equation of induction machine is derived and tested. The derived condition is very useful for the CVCF control of the machine and for determing the characteristics of the system. The simulation results show that magnetizing reactance and rotor resistance is a very important parameter in this control system.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.129-133
• /
• 2017

The machine log files recorded by a scanning control unit in proton beam therapy system have been studied to be used as a quality assurance method of scanning beam deliveries. The accuracy of the data in the log files have been evaluated with a standard calibration beam scan pattern. The proton beam scan pattern has been delivered on a gafchromic film located at the isocenter plane of the proton beam treatment nozzle and found to agree within ${\pm}1.0mm$. The machine data accumulated for the scanning beam proton therapy of five different cases have been analyzed using a statistical method to estimate any systematic error in the data. The high-precision scanning beam log files in line scanning proton therapy system have been validated to be used for off-line scanning beam monitoring and thus as a patient-specific quality assurance method. The use of the machine log files for patient-specific quality assurance would simplify the quality assurance procedure with accurate scanning beam data.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.490-493
• /
• 2004

There is great difficulty in machine below 10 micrometers by conventional machining methods, such as micro-EDM. However, ultra micro machining using focused ion beam(FIB) is able to machine to 50 nanometers. Bie ＆ moulds techniques are better than one-to-one machining techniques in regards to production costs in the mass production of ultra size structures. Also, it is advantageous to machine die ＆ moulds to the 10 micrometers level by FIB technique rather than other techniques. It is difficult to machine the three dimensional machining, such as micro lens, using FIB system because of their machining characteristics. In this paper, three dimensional machining techniques were properly introduced, and also experiments showed effectiveness of their techniques.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.129-134
• /
• 2000

This paper presents the development of ultra-precision machining process of large aspheric aluminum mirrors with a maximum diameter of 620 mm. An ultra-precision machine, "Nanoturn60", developed by Daewoo Heavy Industries Ltd. is used for machining and motion errors of the machine are compensated by using the FTS developed by IAE(Institue for Advanced Engineering) during the machining process. To check the form accuracy of machined aspheric surfaces, on-machine form measurement system is developed. This measurement system consists of air bearing touch probe, straight edge, and laser sensor. With in-process error compensation by FTS(Fast Tool Servo), aspheric mirrors with the from accuracy of submicron order are obtained. obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.5
• /
• pp.510-515
• /
• 2012

Feed drive systems are used to position the machine tool components carrying the cutting tool and workpiece to the desired location. Hence, their positioning accuracy and speed determine the quality and productivity of machine tools. In this paper, technical trend of machine tools feed drive systems are analyzed by patent mapping. And this paper suggested future development direction of feed drive systems. The analysis is carried out by using problem solution map (PSM) for the applied patent during January 2000 and December 2009 in Korea, Japan, EU and U.S.A.

• 한국어정보학회:학술대회논문집
• /
• 2017.10a
• /
• pp.184-189
• /
• 2017

With the advent of robust deep learning method, Neural machine translation has recently become a dominant paradigm and achieved adequate results in translation between popular languages such as English, German, and Spanish. However, its results in under-resourced languages Korean and Vietnamese are still limited. This paper reports an attempt at constructing a bidirectional Korean-Vietnamese Neural machine translation system with the supporting of Korean analysis tool - UTagger, which includes morphological analyzing, POS tagging, and WSD. Experiment results demonstrate that UTagger can significantly improve translation quality of Korean-Vietnamese NMT system in both translation direction. Particularly, it improves approximately 15 BLEU scores for the translation from Korean to Vietnamese direction and 3.12 BLEU scores for the reverse direction.

• Journal of applied mathematics & informatics
• /
• v.26 no.5_6
• /
• pp.889-900
• /
• 2008

The problem of scheduling n jobs on a single machine is considered when the machine is subject to stochastic breakdowns. The objective is to minimize the weighted squared deviation of job completion times from a common due date. Two versions of the problem are addressed. In the first one the common due date is a given constant, whereas in the second one the common due date is a decision variable. In each case, a general form of deterministic equivalent of the stochastic scheduling problem is obtained when the counting process N(t) related to the machine uptimes is a Poisson process. It is proved that an optimal schedule must be V-shaped in terms of weighted processing time when the agreeable weight condition is satisfied. Based on the V-shape property, two dynamic programming algorithms are proposed to solve both versions of the problem.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.327-331
• /
• 2001

In the process of optical parts machining, polishing has been applied. Traditional polishing process is suitable for spherical optical parts. But it is very difficult to apply traditional process for aspheric optical parts. Nowadays, as growing needs for aspherical optic parts, many researches have been conducted. In this study, we developed computer controlled polishing system which consists of three major parts of active pressure control for correcting polishing process, mechanical on-machine measurement for rough polishing, and optical on-machine measurement for finish polishing, respectively. In this paper, a systematic stretegy for correcting polishing process, pressure control scheme for polishing tool, and on-machine measurement methods for automated and precise polishing are suggested. The information about developed machine is also included.