• 한국광학회지
• /
• 제5권4호
• /
• pp.445-452
• /
• 1994

레이저 출력 광속의 위상파면 분석에 관한 이론적인 연구와 측정 실험을 수행하였다. 출력 광속의 위상파면을 축정하기 위해 Mach-Zehnder 간섭계가 사용되었고 간섭무늬로부터 출력 광속의 위상파면을 얻기 위해 Fourier 분석법을 적용하였으며 컴퓨터에 의해 위상파면을 자동적으로 분석하기 위한 분석용 프로그램도 개발하였다. 위상파면 분석에 관한 전산시늉을 반복 수행하여 개발된 프로그램의 타당성을 입증할 수 있었으며 분석용 프로그램의 오차 범위는 대략 .lambda./30 이하임을 알 수 있었다. 개발된 프로그램을 적용하여 연속발진 Nd:YAG 레이저 출력 광속의 위상파면을 측정하는 실험을 수행하였으며 이로부터 레이저 출력 광속의 위상파면이 대략 구면에 가까운 형태임을 확인할 수 있었다.

• 한국광학회지
• /
• 제5권1호
• /
• pp.158-165
• /
• 1994

감지부의 PZT tube를 이용한 위상변조기를 연결한 광섬유 Mach-Zehnder 간섭계를 구성하고, 새로운 신호처리 장치를 도입하여 인가교류전압의 주파수에 상관없이 전압의 크기 및 인가전압의 파형을 측정할 수 있는 광섬유 전압센서를 구성하였다. 이 센서에서 전압변화에 따른 간섭무늬 변화갯수의 관계는 선형적 비례관계를 가짐을 관측하였으며, 온도변화에 따른 간섭무늬의 변화갯수를 측정했다. 또한, 간섭계 출력에서 편광변조에 의해 생길 수 있는 간섭무늬의 visibility의 변화를 없애기 위해 편광유지 광섬유를 이용한 간섭계 또는 광섬유 반파장판을 이용할 수 있음을 보였다.

• 한국광학회지
• /
• 제4권4호
• /
• pp.474-479
• /
• 1993

Melt-spun법에 의해서 자왜특성을 갖는 Co-Fe-B ribbon을 제작한 후 광섬유 Mach-Zehnder 간섭계의 sensing-arm에 부착하여 간섭형 자계센서를 구성하였다. Co-Fe-B 자왜변환기로 구성된 자계센서의 동작실험 결과 ac 자왜 응답이 최대가 되는 dc 바이어스 자계는 출력이 0인 바이어스 지점으로부터 0.970e 정도 떨어져 있었으며, 최소 감지자장은 3kHz에서 3.9${\times}10^{-5}$ Oe(rms)/${\sqrt{Hz}}$였다. 응답이 최대가 되는 지점에 바이어스를 고정시켰을 때 ac 자계셈서의 출력이 포화되기 시작하는 입력 자계신호는 1 Oe(rms) 근처였다. Co-Fe-B 자왜변환기의 주파수 특성곡선에서 응답이 피크가 되는 주파수는 ~500Hz였다.

• Composites Research
• /
• 제17권2호
• /
• pp.28-33
• /
• 2004

광섬유 브래그 격자센서를 이용하여 인장하중을 받는 직교적출 복합해로 법에서 발생하는 파손신호를 계측하였다. 민감도와 주파수 대역성능을 향상시키기 위하여 수동 마흐_젠더 간섭계 방식의 복조기를 제안하였다. 제안한 FBG 센서시스템은 위상변조기와 같은 능동소자가 없기 때문에 구성이 간단하고 쉽게 구현할 수 있으며 충격이나 파손 신호와 같이 작은 진폭의 고주파 진동 측정이 가능하다. FBG 센서로 측정한 복합재료의 파손신호는 복합재료 시편의 90도 층에서 모재 균열이 진전하면서 발생하는 급격한 변형률 변이에 해당하는 초기 오프？ 값과 최대 수백 킬로헤르쯔에 이르는 주파수로 진동하고 었었다.

• ETRI Journal
• /
• 제29권5호
• /
• pp.633-640
• /
• 2007

We report an experimental demonstration of 40 Gbps all-optical 3R regeneration with all-optical clock recovery based on InP semiconductor devices. We also obtain alloptical non-return-to-zero to return-to-zero (NRZ-to-RZ) format conversion using the recovered clock signal at 10 Gbps and 40 Gbps. It leads to a good performance using a Mach-Zehnder interferometric wavelength converter and a self-pulsating laser diode (LD). The self-pulsating LD serves a recovered clock, which has an rms timing jitter as low as sub-picosecond. In the case of 3R regeneration of RZ data, we achieve a 1.0 dB power penalty at $10^{-9}$ BER after demultiplexing 40 Gbps to 10 Gbps with an eletroabsorption modulator. The regenerated 3R data shows stable error-free operation with no BER floor for all channels. The combination of these functional devices provides all-optical 3R regeneration with NRZ-to-RZ conversion.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.7-10
• /
• 2000

The soft x-ray(10nm-100nm) interferometer is a modified Mach-Zehnder type interferometer and it consists of two beam-splitters and four totally reflecting mirrors. The beam-splitters used here are 50% transmission and 50% reflection grating type. The diffraction patterns of beam splitters(1st B.S.) were investigated with a He-Ne laser. The diffraction patterns produced by the soft x-ray interferometer (2nd B.S.) were also investigated in intensities positions. The diffraction patterns of 20 degree grazing incidence on the beam splitters(1st B.S.) show a circular array of spots. Both the reflected and the transmitted beams show the same patterns but symmetric circles on the screen. The maximum intensity appears roughly when n is in the zeroth and odd orders and the suppressed peak(missing order) appears when n is in even orders. Intensities of 3 center fringes(n = 0, $\pm$1) are stronger than others. These results confirm the reduced grating equation and make agree with the intensity distribution function. It was found that the final patterns produced by the soft x-ray interferometer (2nd B.S.) consisted of fine fringes which were caused by two of three diffraction beams that were arrived at the second beam-splitter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.223-223
• /
• 2009

In this paper, designed and simulated Power Splitter (PS) integrated Mach-Zehnder interferometer (MZI) based planar type optical waveguide devices (which is called here a PS-MZI). The PS-MZI optical waveguide sensor was preceded by a Y-junction, which splits the input power between the sensor, and a reference branch, to minimize the effect of optical power variations. The PS-MZI optical waveguide sensor induced changing phases of the incident beam, which had fallen upon the waveguide through computer simulation, according to the small changes in the index of refraction, thus beam intensity was changed. The waveguide were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of PS-MZI optical waveguide sensor was performed by a conventional planar lightwave circuit (PLC) fabrication process. The PS-MZI optical waveguide that was fabricated to be applied as a biosensor revealed a low insertion loss and a low polarization-dependent loss. After having etched the over-clad at the sensor part in the MZI optical waveguide that was fabricated, Ti deposition was made on the adhesion layer, and then Au thin-film deposition was carried out thereon. In addition, its optical properties were measured by having changed the index of refraction oil at the sensing part of the MZI. To apply the planar type PS-MZI optical waveguide as a biosensor, a detection test for Staphylococcus aureus was conducted according to changes in concentration, having adopted Ti-alkoxide as ligand. The detection result of the S. aureus by the PS-MZI optical waveguide sensor was possible to the level of $10^1$ CFU/ml.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.797-805
• /
• 2003

This paper describes experimental investigations of helium-air exchange flow through single opening and partitioned opening. Such exchange flows may occur following rupture accident of stand pipe in high temperature gas cooled reactor. A test vessel with a small opening on top of test cylinder is used for experiments. An estimation method of mass increment is developed and applied to measure the exchange flow rate. A technique of flow visualization by Mach-Zehnder interferometer is provided to recognize the exchange flows. Flow measurements are made with the opening, for partition ratios H_p/H$_1$$ in the range 0 to 1. where H_p$ and H$_1$ are partition length and height of the opening. respectively. In the case of H_p/H$_1$$ of 0, flow passages of upward flow of the helium and downward flow of the air within the opening are unseparated (bidirectional), and the two flows interfere within the opening. The unseparated flow increases strength of flow resistance and therefore, the exchange flow rate is minimum through range of the partition ratios. Two flow zones, i.e., separated (unidirectional) flow zone and unseparated (bidirectional) flow zone, exist with increasing the partition length. The exchange flow rate increases with increasing the separated flow zone. It is found that a maximum exchange flow rate exists at H_p/H$_1$$ of 1. As a result of comparison of the exchange flow rates by changing the partition ratio, the fluids Interference in the unseparated zone is found to be an important factor on the helium-air exchange flow rate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.192-200
• /
• 1999

This paper describes experimental investigations of helium-air exchange flow through parti-tioned opening. Such exchange flow may occur following rupture accident of stand pipe in high temperature gas cooled reactor. A test vessel with a opening on top of test cylinder is used for experiments. An estimation method of mass increment is developed and applied to measure the exchange flow rate. A technique of flow visualization by Mach-Zehnder interferometer is provided to recognize the exchange flows. Flow measurements are made with partitioned opening for parti-tion rations $H_p/H_1$ in the range 0 to 1 where $H_p$ and $H_1$ are partition length and height of the open-ing respecticely. In the case of $H_p/H_1$ of 0 flow passages of upward flow of the helium and down-ward flow of the air within the opening are unseparated (bidirectional) and the two flows interact exchange flow rate is minimum through range of the partition ratios, Two flow zones i.e. separat-ed(unidirectional)flow zone and unseparated(bidirectional) flow zone exist with increasing the partition. length, The exchange flow rate increases with increasing the separated flow zone. It is found that a maximum exchange flow rate exists at $H_p/H_1$ of 1. As a result fo comparison of the exchange flow rates by changing the partition ration the fluids interaction in the unseparated zone is found to be an important factor on the helium-air exchange flow rate.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1023-1030
• /
• 2023

본 논문은 눈, 비, 안개 등 열악한 운용환경에도 강건한 표적검출 특성을 가지는 FMCW LiDAR에 대해서 기술하고 있다. 특히 FMCW LiDAR의 거리 해상도, 가간섭거리 및 최대측정거리 성능에 직접적으로 영향을 미치는 주파수변조레이저의 성능개선에 대해 기술하고 있다. 불평형 Mach-Zehnder 레이저간섭계를 활용하여, 레이저의 발진주파수의 변화율을 실시간 측정하고, 주파수변조 오차를 보정하는 광학식 위상동기루프 기술을 이용한 주파수변조 방법에 대해 기술하였다. 가간섭거리가 긴 레이저 광원을 발진하기 위해 확장공진기형 레이저다이오드를 적용하였으며, 레이저에서 발진되는 주파수 측정을 위해 광집적회로 구조의 레이저간섭계를 적용하였다. 개발된 FMCW LiDAR의 대역폭과 거리해상도는 각각 10.045GHz와 0.84mm로 측정되었다.