• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.119-123
• /
• 2010

The transmission performance of 10Gb/s optical duobinary transmitters implemented by using a Mach-Zehnder(MZ) modulator and an optical delay interferometer is presented. We investigated the theoretical impact of transmission systems by the modulator driving voltage ratio(=driving voltage/switching voltage) and the optical interferometer time delay to improve transmission distance using computer simulation. By reducing the driving voltage ratio and optimizing the partial bit time delay, the transmission performance has been improved greatly.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.2
• /
• pp.96-110
• /
• 1995

Traveling-wave electrodes for the high-speed Ti:LiNbO$_{3}$ modulators are designed. For a solution to the problems of 1) phase-velocity mismatching between the optical wave and the Modulating M/W, 2) M/W electrode characteristic impedance mismateching, we assume devices with 1$\mu$m thick SiO$_{2}$ buffer layer between the electrode and the Ti:LiNbO$_{3}$ substrate. The electrode analyses are performed by the FEM using the second-order triangular elements. The optimum design parameters to satisfy the phase-velocity matching and the characteristic impedance matching are sought for. By use of the analyses' results, a Mach-Zehnder optical modulator with a CPW electrode is designed as an example. the band-width estimation is also illustrated.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.149-155
• /
• 1996

In this paper, we designed binary phase grating with SA (simulated annealing) algorithm for image generation, and used LCTV(liquid crystal television) as phase modulator. We generated optical image using LCTV which controlled by personal computer in real time. Many parameters in SA algorithm are determined by average deviation of the cost function, not experimental method. It was confirmed that the LCTV could be used as a phase modulator through mach-zehnder interferometering experiment. The various optical images are generated in real itme by fourier transforming of the phase gratings on LCTV which is controlled by personal computer and they can be used for optical interconnection in a neural network and addressing information in a volume hologram etc.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.150-151
• /
• 2002

파장 분할 다중화(Wavelength division multiplexing ： WDM) 광전송 장치의 용량확대를 위한 방안으로 여러 가지 방법들이 연구 개발되고 있으며, 최근 들어 테라 급(Tb/s) 광전송 연구 결과들이 발표되고 있다. 이러한 장거리 광전송 장치의 광송신기는 LiNbO$_3$ 마하-젠더(Mach-Zehnder) 간섭계형 외부 변조기를 주로 사용하고 있다. 한편 반도체 레이저 집적된 전계 흡수형 변조기(Electro-absorption modulator integrated laser ： EML)를 이용한 외부 변조 방식 적용을 위해서 여러 연구소 및 기업체에서는 40Gb/s의 성능을 지닌 EML의 개발 결과들을 발표하고 있다. (중략)

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.1-10
• /
• 2006

In this paper, a new high resolution XGA-SLM is implemented through modification of a commercial TFT-LCD beam projector and its optical modulation characteristics as a spatial light modulator(SLM) is also analyzed. First, the optics module, projection lamp and fans are removed from a commercial beam projector and instead some electric circuits to compensate their removal are manufactured and then, by inserting them into the beam projector, a new XGA-SLM is finally implemented. Second, from some optical experimental results, this TFT-SLM is found to have a good optical linearity in amplitude and phase modulation characteristics as a function of the input gray levels. Especially, through implementation of a binary phase-type correlator such as BPEJTC by using the suggested TFT-LCD panel, the implemented SLM is proposed as a new relatively low-cost and high resolution SLM for optical information processing.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.203-204
• /
• 2006

We present and demonstrate a novel method of alternate-phase return-to-zero (RZ) signal generation and pulse-amplitude equalization simultaneously in a rational harmonic mode-locked fiber ring laser, using a dual-drive Mach-Zehnder (MZ) modulator. By adjusting the voltages applied to both arms of the modulator, the rational harmonic mode-locked pulse trains are equalized in their amplitudes. In addition to that, the amplitude-equalized pulse trains multiplying the repetition rate at ${\sim}10\;GHz$ have alternate $\pi$ phase difference between adjacent pulses. The alternate-phase RZ signal generated by the proposed method enhances transmission performance through the single-mode fiber (SMF) links without dispersion compensation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.41-49
• /
• 2004

Nonlinear distortion introduced by the optical transmitter using a direct modulation of laser diode(LD) and an indirect modulation of optical modulator can limit considerably the performance of analog optical link system such as subcarrier multiplexing system. In this paper, we have compensated the nonlinear distortion of LD and optical modulator using electrical predistorter. In the case of LD, two-tone experiments using 877.5 MHz and 882.5 MHz have shown reduction of 19 dB in third-order intermodulation product(IMP$_3$). And in the case of optical modulator, we have achieved nearly 21 dB reduction in IMP3 through two-tone experiments using 1.8975 GHz and 1.9025 GHz. The spurious free dynamic ranges of LD and optical modulator are also improved by 5 dB/Hz$^{2}$ 3/ and 7 dB/Hz$^{2}$ 3/, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.6
• /
• pp.610-618
• /
• 2021

In this paper, a photonic-based microwave system technology is described, and a traveling-wave electro-optic modulator is designed and manufactured as a key component. The fabricated modulator is composed of a metal diffusion waveguide for optical transmission and a planar waveguide electrode on lithium niobate substrate for microwave transmission. The electro-optic response bandwidth of I and Q channels in a fabricated dual parallel Mach-Zehnder modulator were measured for 27.67 and 28.11 GHz, respectively. Photonic four times up-converted X-band frequency and linear frequency modulated signal were confirmed using the fabricated electro-optic modulator by S-band input signal. The confirmed broadband signal can be applied to a microwave system for surveillance and high-resolution ISAR imaging.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.34-40
• /
• 2002

In this paper, a new encryption method for a binary image using Phase modulation and Fourier transform is proposed. For decryption we use the characteristics of square law detector. In encryption process, a key image is obtained by phase modulation of 256 level random pattern and its Fourier transformation, and input image is encrypted by Fourier transforming the multiplication of the phase modulated random pattern and phase modulated input image. The encrypted image and key image have only phase information, so they can not be copied or counterfeited and the original image can not be decrypted without the key image. To reconstruct the original image, each phase mask of the key image and the encrypted image must be placed on each path of the Mach-Zehnder interferometry with Fourier transform lens and the output image is obtained in the form of intensity in the CCD(Charge Coupled Device) camera. The real-time decryption is possible in the proposed system by use of a LCD as a phase modulator and a CCD camera as an intensity detector. The proposed method shows a good performance in the computer simulation and optical experiment as an encryption scheme.

• Korean Journal of Optics and Photonics
• /
• v.34 no.4
• /
• pp.151-156
• /
• 2023

We propose to implement cost-effectively a high-speed short-haul interconnect by transmitting a 200-Gb/s/λ two-channel optical time-division-multiplexed signal generated by a carrier-suppressed optical pulse, which improves the robustness of the multiplexed signal to chromatic dispersion. The multiplexed 200-Gb/s signal is generated in the transmitter by combining two 100-Gb/s 4-level pulse-amplitude-modulated signals (generated using the optical pulse and two Mach-Zehnder modulators). After the signal is transmitted over a fiber, it is amplified by a semiconductor optical amplifier and detected by a photodiode. The amplified spontaneous emission noise is eliminated by an optical band-pass filter. The transmitted signal is reconstructed by a 2 × 2 multiple-input multiple-output equalizer, which compensates for crosstalk. Due to the use of the carrier-suppressed optical pulse, the 200-Gb/s signal can be transmitted over fiber with a chromatic dispersion of 40 ps/nm.