• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.264-268
• /
• 1990

A guided-wave electro-optic Mach-Zehnder interferometric modulator was fabricated on X-cut LiNbO3 . The channel waveguides were formed by proton diffusion with self-aligned SiO2-cladding. A mach-Zehnder interferometric modulator with arm lengths of 7mm has been fabricated and tested at 0.6328${\mu}{\textrm}{m}$. Its modulation depth with V$\pi$ of only 3.5V was 85% and the 3dB bandwidth was 1.6KHz. For high speed operation, the electrode dimension should be reduced to have smaller R, L, and C.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.5
• /
• pp.442-451
• /
• 1992

Mach-Zehnder type GaAs elcetro-optic waveguide modulator has been designed in this paper.The modulator. Considered is based on the Mach-Zehnder interferometer configuration, consisting of two Y branch couping rib type waveguides formed in two epitaxial layers on GaAs substrate. The mode theory on waveguides and electo-optic effect of GaAs were utilized to determine the design parameters for the modulator proposed. Effective index method was applied to design the of waveguide supporting a single mode were calculated to achieve the optimized operation of the modulator. Considering interrelationships between many parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.477-479
• /
• 1997

The preparation of mach-zehnder inteferometric optical modulator and the properties of electrode and modulation bandwidth for high speed optical communications were described. The results of fabricated optical modulator was that optical 3-dB bandwidth 4.7GHz, driving voltage 6V and fiber-waveguide-fiber insertion loss 4.5dB for TM mode respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.141-145
• /
• 2011

We theoretically investigated dispersion tolerance of an optical duobinary transmitter employed a Mach-Zehnder modulator and an optical filter. Compared to the optical transmitter based on a Mach-Zehnder modulator and an optical delay interferometer by optimizing the applied voltage for improving the dispersion tolerance, the demonstrated duobinary transmitter provides improved receiver sensitivity and higher dispersion tolerance while maintaining narrow spectral bandwidth.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.491-493
• /
• 2013

This paper proposes a frequency-doubling optoelectronic oscillator employing a novel three-arm dual-output Mach-Zehnder modulator (MZM). One output of the MZM generates the fundamental-frequency signal which is recycled by the microwave optical fiber link for oscillation, and the other output can generate the frequency-doubled signal. Experiment was conducted using a commercial two-arm MZM, a phase modulator, and an optical fiber link of 89 meters in length. A 19-GHz frequency-doubled signal was successively obtained with fundamental signal suppression more than 36 dB.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.385-391
• /
• 2016

We demonstrated experimentally a variable optical frequency comb source using a cascaded dual parallel Mach Zehnder modulator (DPMZM) and a phase modulator (PM). With this simple configuration and applying low drive voltages, we generated variable comb source composed of spectral lines 3, 5, 7, 9 and 11 with 10-GHz frequency spacing, also generated 2 and 3 spectral lines with 20 GHz frequency spacing. The generated comb source maintains high spectral coherence across the entire bandwidth with good spectral flatness (within 1-dB for 2, 3, 5, 7 comb lines, within 2-dB for 9-comb lines and within 3-dB for 11 comb lines). The flat and variable comb source is mainly achieved by manipulating 6 operating parameters of DPMZM, setting RF amplifier gain, connected at phase modulator and phase shifters. Hence the method is simple and offers great flexibility in achieving flat and variable comb spectrum, which is experimentally demonstrated. This brings advantages of power efficiency due to low driving voltages, simplicity and cost effectiveness to the system.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.110-114
• /
• 1991

A guided-wave electrooptic Mach-Zehnder interferometric modulator was fabricated on Y-cut acoustic grade LiNbO3 process. In order to reduce the electrode capacitance, serial capacitance electrode(SCE) structure was adopted. Extinction ratio more than 30dB was obtained with V$\pi$ of 4.69 volt at λ= 0.6328${\mu}{\textrm}{m}$. Frequency response was measured by using the swept frequency technique, and the bandwidth of the modulator was about 1GHz.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.77-80
• /
• 2001

In this paper, it is analyzed the statistical characteristics on the transmission performance of the optical SCM transmission in the CDMA RF signal relay system. Using Mach-Zehnder modulator, optical signal is regenerated into CDMA RF signal. Transfer function model of mach-Zehnder modulator is approximated to the third power of the input signal using Taylor series. BER results are analyzed under the multiple access interference and multi-path fading environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.17-22
• /
• 2010

We have proposed and experimentally demonstrated a novel fiber Bragg grating (FBG) sensing interrogation method using bidirectional modulation of a Mach-Zehnder electro-optical modulator (MZ-EOM). The proposed structure consists mainly of a broadband light source (BBS), FBG, MZ-EOM, chirped fiber Bragg grating (CFBG), and photodetector (PD). We have obtained the transfer functions of the proposed structure and calculated the time delay from the change in the free spectral range (FSR) for ten wavelengths over the frequency range of 505 MHz to 525 MHz. The results show that the time delay and the wavelength variation have a good linear relationship with a gradient of 12.9 ps/0.2 nm, which can be usefully applied to FBG strain or temperature sensors and other multiplexed sensor applications.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.11
• /
• pp.9-14
• /
• 2008

This paper presents the performance analysis of 10[Gb/s] optical duobinary transmitters with the non-ideal Mach-Zehnder modulator which does not have exactly 50/50 splitting/combining ratios by computer simulations. For driving voltage ratios(=driving voltage/switching voltage) with smaller than 100[%], the transmission performance has been greatly affected by extension of LPF bandwidths. Nevertheless, the performance has been degraded when the driving voltage ratio is 100[%]. The smaller driving voltage ratios has, the more sensitivity improves by extension of LPF bandwidths under the asymmetry condition. But the driving voltage ratio with 80[%] has better bit error rate(BER) than those with 50[%] and 25[%].