• ETRI Journal
• /
• 제30권2호
• /
• pp.249-254
• /
• 2008

In this paper, we demonstrate an electrically band-limited carrier-suppressed return-to-zero (EB-CSRZ) signal generator operating up to a 10 Gbps data rate comprising a single-stage Mach-Zehnder modulator and a wideband signal mixer. The wideband signal mixer comprises inverter stages, a mixing stage, and a gain amplifier. It is implemented by using a 0.13 ${\mu}m$ CMOS technology. Its transmission response shows a frequency range from DC to 6.4 GHz, and the isolation response between data and clock signals is about 21 dB at 6.4 GHz. Experimental results show optical spectral narrowing due to incorporating an electrical band-limiting filter and some waveform distortion due to bandwidth limitation by the filter. At 10 Gbps transmission, the chromatic dispersion tolerance of the EB-CSRZ signal is better than that of NRZ-modulated signal in single-mode fiber.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.852-855
• /
• 2004

This experimental study describes the propagation characteristics of the impulse noise emitted from the exit of a straight pipe attached to the open end of a simple shock tube. The sound pressure level and directivity of the impulse noise propagating from the exit of pipe with several different diameters are measured in the far sound fold for the range of the incident shock wave Mach number between 1.07 and 1.26. The experimental results showed that the peak values of impulse noises had a strong dependance on the exit diameter of a pipe and the shock wave Mach number. The impulse noise had the directivity propagating toward to the pipe axis and the characteristics of inverse square law of propagation distance. Moreover, it was shown that the one-third octave band SPL of impulse noise was almost constant regardless of the frequency band.

• 한국광학회지
• /
• 제18권6호
• /
• pp.447-451
• /
• 2007

실리카 평판 광집적회로 마하젠더 간섭 구조를 이용한 트라이플렉서를 제안하고, 시뮬레이션을 통해 그 특성을 분석하였다. 1310 nm 대역과 $1480{\sim}1560nm$ 대역을 분리하기 위하여 마하젠더 암의 길이 차는 1310 nm 파장의 정수배 더하기 반 파장으로 하고, 방향성 결합기의 균형도는 $1480{\sim}1560nm$ 대역에서 적정화하였다. 이와 같은 마하젠더 간섭 구조를 한 단 더 사용함으로써, 매우 우수한 채널 누화 특성을 얻을 수 있었다. 1490 nm 대역과 1550 nm 대역을 추가적으로 분리하기 위하여 마하젠더 간섭구조를 추가로 두 단 더 사용하였다. 삼차원 BPM과 전송행렬방법을 통하여 각 채널들 사이의 낮은 누화 특성을 확인하였고, 제작 과정에서 발생할 수 있는 공정오차에 둔감한 특성을 보임을 확인하였다.

• 전자공학회논문지A
• /
• 제32A권2호
• /
• pp.96-110
• /
• 1995

Traveling-wave electrodes for the high-speed Ti:LiNbO$_{3}$ modulators are designed. For a solution to the problems of 1) phase-velocity mismatching between the optical wave and the Modulating M/W, 2) M/W electrode characteristic impedance mismateching, we assume devices with 1$\mu$m thick SiO$_{2}$ buffer layer between the electrode and the Ti:LiNbO$_{3}$ substrate. The electrode analyses are performed by the FEM using the second-order triangular elements. The optimum design parameters to satisfy the phase-velocity matching and the characteristic impedance matching are sought for. By use of the analyses' results, a Mach-Zehnder optical modulator with a CPW electrode is designed as an example. the band-width estimation is also illustrated.

• 한국유체기계학회 논문집
• /
• 제13권1호
• /
• pp.35-41
• /
• 2010

Experimental study on the flow field inside the nozzle for radial turbine was performed. At design point, the pressure is high and the Mach number is low at the pressure side of the nozzle inlet semi-vaneless space as the flow turns through the nozzle vanes. As the flow accelerates through the nozzle passage to the throat the pressure level at the pressure and suction sides becomes similar. The flow continued accelerating from the throat to the inlet of turbine wheel and the pressure field became uniform in the circumferential direction in the vaneless space. In high expansion ratio condition, strong favorable pressure gradient band region occurred just after the throat in the semi-vaneless space in the circumferential direction and the pressure became uniform in the circumferential direction after this band. In low expansion ratio condition, core flow acceleration is dominant after the throat and this non-uniform pressure field reached to the inlet of turbine wheel.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.20-25
• /
• 2005

본 연구에서는 UH-1H 헬리콥터의 축소 로터에 대한 두께소음과 하중소음, 그리고 와류흘림에 의한 광역소음을 각각 수치계산을 통해 얻어내고, 그 크기를 비교하였다. 로터의 후류형상은 Kocurek과 Tangler의 지정후류 방법을 사용하였으며, 팁 마하수 $M_{T}$의 범위는 0.2, 0.4, 0.8로 나누어서 유동장 계산과 그에 따른 소음해석을 시도하였다. 팁 마흐 수 $M_{T}$ = 0.8에서 와류 흘림에 의한 광역 소음은 가청주파수 대역 및 A-가중함수를 고려하였을 때에 상대적으로 저주파수 특성을 갖는 두께소음이나 하중소음에 비해 작은 값을 보이는 것으로 나타났다. 특히 광역소음은 가청주파수를 벗어난 초음파 영역에서 대부분의 음압을 방사하는 것으로 나타났다. 반면 $M_{T}$를 0.4 이하로 하였을 때에는 광역소음이 저주파수 영역으로 이동하면서 이산소음에 비해 더 소음레벨을 보이는 것으로 나타났다. 즉, 저속 회전하는 헬리콥터 로터의 경우에는 광역소음의 고려가 필수적임을 알 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.43-49
• /
• 2014

마크-젠더 변조기와 저역 통과 필터를 사용하여 광 듀오바이너리 신호를 생성하는 광 듀오바이너리 송신기의 전송 특성을 40Gbps에서 이론적으로 분석하였다. 광 듀오바이너리 시스템의 전송 성능은 송신기를 구성하는 저역 통과 필터와 광 필터 그리고 수신기내 필터의 대역폭에 따라 차이를 보였으며 각 필터들은 광 파워 스펙트럼에 각기 다른 영향을 주었다. 필터들의 최적화된 대역폭을 선택함으로써 광 듀오바이너리 신호 전송 시 부엽 발생과 리플을 억제시키고 분산 내성을 개선 할 수 있었다.

• Korean Journal of Radiology
• /
• 제21권4호
• /
• pp.462-470
• /
• 2020

Objective: To demonstrate that human visual illusion can contribute to sub-endocardial dark rim artifact in contrast-enhanced myocardial perfusion magnetic resonance images. Materials and Methods: Numerical phantoms were generated to simulate the first-passage of contrast agent in the heart, and rendered in conventional gray scale as well as in color scale with reduced luminance variation. Cardiac perfusion images were acquired from two healthy volunteers, and were displayed by the same gray and color scales used in the numerical study. Before and after k-space windowing, the left ventricle (LV)-myocardium boarders were analyzed visually and quantitatively through intensity profiles perpendicular the boarders. Results: k-space windowing yielded monotonically decreasing signal intensity near the LV-myocardium boarder in the phantom images, as confirmed by negative finite difference values near the board ranging -1.07 to -0.14. However, the dark band still appears, which is perceived by visual illusion. Dark rim is perceived in the in-vivo images after k-space windowing that removed the quantitative signal dip, suggesting that the perceived dark rim is a visual illusion. The perceived dark rim is stronger at peak LV enhancement than the peak myocardial enhancement, due to the larger intensity difference between LV and myocardium. In both numerical phantom and in-vivo images, the illusory dark band is not visible in the color map due to reduced luminance variation. Conclusion: Visual illusion is another potential cause of dark rim artifact in contrast-enhanced myocardial perfusion MRI as demonstrated by illusory rim perceived in the absence of quantitative intensity undershoot.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.34-35
• /
• 2001

The wavelength demultiplexer is an essential component in optical transmission systems using wavelength-division multiplexing(WDM), which can increase the number of channels and information capacity of optical fibers. For optical telecommunication, much attention has been given to demultiplexing two wavelengths in the 1.3${\mu}{\textrm}{m}$ of low dispersion band and 1.55${\mu}{\textrm}{m}$ of low loss window. Various integrated-optical devices have been proposed to perform this function, including conventional directional couplers, asymmetric Y-branching devices, asymmetric Mach-Zehnder interferometers and two-mode interference devices. (omitted)

• 한국군사과학기술학회지
• /
• 제24권6호
• /
• pp.610-618
• /
• 2021

In this paper, a photonic-based microwave system technology is described, and a traveling-wave electro-optic modulator is designed and manufactured as a key component. The fabricated modulator is composed of a metal diffusion waveguide for optical transmission and a planar waveguide electrode on lithium niobate substrate for microwave transmission. The electro-optic response bandwidth of I and Q channels in a fabricated dual parallel Mach-Zehnder modulator were measured for 27.67 and 28.11 GHz, respectively. Photonic four times up-converted X-band frequency and linear frequency modulated signal were confirmed using the fabricated electro-optic modulator by S-band input signal. The confirmed broadband signal can be applied to a microwave system for surveillance and high-resolution ISAR imaging.