• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.3
• /
• pp.194-200
• /
• 2007

Purpose: $^{13}N$-ammonia is a well known radiopharmaceutical for the measurement of a myocardial blood flow (MBF) non-invasively using PET-CT. In this study, we investigated a correlation between MBF obtained from dynamic imaging and myocardial perfusion score (MPS) obtained from static imaging for usefulness of cardiac PET study. Methods: Twelve patients (11 males, 1 female, $57.9{\pm}8.6$ years old) with suspicious coronary artery disease underwent PET-CT scan. Dynamic scans (6 min: $5\;sec\;{\times}\;12,\;10\;sec\;{\times}\;6,\;20\;sec\;{\times}\;3,\;and\;30\;sec\;{\times}\;6$) were initiated simultaneously with bolus injection of 11 MBq/kg $^{13}N-ammonia$ to acquire rest and stress image. Gating image was acquired during 13 minutes continuously. Nine-segment model (4 basal walls, 4 mid walls, and apex) was used for a measurement of MBF. Time activity curve of input function and myocardium was extracted from ROI methods in 9 regions for quantification. The MPS were evaluated using quantitative analysis software. To compare between 20-segment model and 9-segment model, 6 basal segments were excluded and averaged segmental scores were used. Results: There are weak correlation between MBF (rest, 0.18-2.38 ml/min/g; stress, 0.40-4.95 ml/min/g) and MPS (rest 22-91%, stress, 14-90%), however the correlation coefficient between corrected MBF and MPS in rest state was higher than stress state (rest r=0.59; stress r=0.80). As a thickening increased, correlation between MBF and MPS also showed good correlation at each segments. Conclusions: Corrected and translated MPS as its characteristics using $^{13}N$-ammonia showed good correlation with absolute MBF measured by dynamic image in this study. Therefore, we showed MPS is one of good indices which reflect MBF. We anticipate PET-CT could be used as useful tool for evaluation of myocardial function in nuclear cardiac study.

• Development and Reproduction
• /
• v.15 no.4
• /
• pp.373-383
• /
• 2011

Tributyltin (TBT) is one of endocrine disrupters which are known as having similar function to sex steroid hormone inducing apoptosis in various tissues of rodents. Recently, it has been reported that TBT induces apoptosis in thymus causing the decreased thymic function, but little is known about the mechanism. To elucidate the mechanism, three-week-old SD female rats were orally administrated with TBT 1, 10, and 25 mg per body weight (kg) and sesame oil as a control for 7 days. On day 8, the thymi were obtained and weighed, and then the number of thymocytes was counted. We also performed H&E staining, TUNEL assay, and Annexin V flow cytometric analysis to examine the apoptosis rates and the structure in the thymus. Next, we investigated the adipogenesis and apoptosis-related mRNA expression levels in the thymi by real-time PCR. The thymic weight and the number of thymocytes were decreased by TBT in a dose-dependent manner. As a result of the H&E staining, the boundary between cortical and medullary area was blurred in the thymi of TBT treated rats compared to those of controls. In the results of TUNEL assay and Annexin V flow cytometric analysis, apoptosis rates in the thymus were increased after TBT treatment. The expression levels of thymic epithelial cell marker genes such as EVA, KGF, AIRE, and IL-7 were significantly decreased in the thymi of TBT treated rats, but $PPAR{\gamma}$, aP2, PEPCK, and CD36 were significantly increased. The expression of $TNF{\alpha}$ and TNFR1 as apoptosis-related genes also was significantly increased after TBT treatment. The present study demonstrates that TBT can increase the expression of adipogenesis and apoptosis-related genes leading to apoptosis in the thymus. These results suggest that the increased adipogenesis of thymus by TBT exposure might induce apoptosis in the thymus resulting in a loss in thymic immune function.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.282-288
• /
• 2013

This study was conducted to investigate the quality characteristics of eight everbearing strawberry cultivars and the effect of precooling treatment to maintain the quality during storage and shelf life of 'Charlotte'. Several quality parameters including firmness, soluble solids content (SSC), color, soluble sugars, and organic acids were evaluated. For Successful marketing everbearing strawberries required more than 1 N of firmness and $6^{\circ}Brix$ of SSC, respectively. 'Albion', 'Charlotte', and 'Goha' cultivars were higher in fruit SSC and 'Charlotte' cultivar was higher in fruit firmness among eight cultivars examined in this study. Fruit had more bright red color in 'Charlotte', 'Flamingo', 'GW-4', and 'San Andreas', which may reflect the consumer acceptance. Physicochemical characteristics of 'Charlotte' strawberry after with/without room precooling treatment were evaluated during storage at $4^{\circ}C$, $10^{\circ}C$, and $25^{\circ}C$ and additional 3 days at $25^{\circ}C$ for shelf-life. Weight loss increased about 8% in the fruits stored at $25^{\circ}C$ for 3 days, while in low temperature storage was about 2% for 7 days showing precooling was more effect on during shelf life periods rather than storage periods. Decay was not found during storage at $4^{\circ}C$ regardless of precooling treatment, but fungal growth was found in all the treatments after transferred to room temperature. Precooling treatment did not affect fruit color in shelf life period. For advanced marketing, everbearing strawberry should maintain in low temperature less than $4^{\circ}C$ to sustain quality, but the room precooling showed less significant effect to maintain quality on 'Charlotte' cultivar.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.355-372
• /
• 2004

In vitro experiments were conducted to determine the formation of fatty acid soaps (FAS) and neutral detergent fiber (NDF) disappearance rate. The substrates were a basal alfalfa hay containing 1) no oil, 2) 10% soybean oil, 3) 10% com oil, on a weight basis. All the substrates were incubated in triplicate for 0, 3, 6, 12, 24 and 48h in each experiment. After the incubation in the first experiment serum bottles (6oml) were analyzed for nonesterified, esterifed and fatty acid soaps contents. The serum bottles (120mI) from the second experiment were analyzed for pH, $NH_3-N$ and VFA concentration, and dry matter and NDF disappearance rate. pH decreased and the concentration of NH3-N increased significantly with longer incubation time (P<0.0001). The disappearance rates of dry matter and NDF significantly varied with feed, incubation time and oils (P<0.05). The molar concentration of total VFA increased and proportion of acetate significantly decreased with incubation time (P<0.0001), but the proportion of propionate significantly increased with longer incubation time (P<0.0001). Addition of oils to diet lowered the ratio of acetate:propionate (P<0.05). The esterified fatty acids (EFA) decreased with increasing incubation time (P<0.0001), and nonesterified fatty acids (NEFA) increased due to lipolysis of EFA, NEFA then reacted with cations to increase formation of FAS. The formation of FAS increased significantly at 48h of incubation time (P<0.0001). Especially, formation of stearic acid soaps was 27.5 and 32.5 folds with soybean oil and com oil supplements, respectively, by 48h of incubation time (P<0.0001). Alfalfa hay had higher cation contents, particularly Ca, which react with NEFA and FAS can be formed with longer incubation time. Saturated fatty acids had a higher proportion of FAS than did unsaturated fatty acids, suggesting that the former may react more extensively with cations. FAS contents increased with increasing chain length of the fatty acids. Since added vegetable oils fonned FAS, it might decrease negative effects on in vitro fermentation characteristics and NDF disappearance rate.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.451-458
• /
• 2004

No comprebensive forage quality of annual legumes harvested and cured in spring has been conducted in Korea. Therefore, this experiment was carried out to gain information on the quality of crimson clover (Trifolium incarnatum L.), bolta baIansa clover(Trifolium ba/anansae L.), and persian c1over(Trifolium resupinatum L.) during field curing in spring. The dry matter content of crimson clover at harvest was 24.7%, while bolta balansa and persian clovers had 20.4 and 18.8%, respectively. The moisture content of persian clover was low at the final curing day. But All species took 4 days to reach moisture content under 20%Tedding frequency did not affect moisture content, but consisten trends were also observed during the field curing. Persian clover tended to show a higher leaf-stem ratio than crimson and bolta balansa clovers on dry matter basis. Crude protein of persian clover(19.5%) was higher than other legumes. The percentage of erode protein was decreased from 17.8 to 16.5% as tedding frequency often did. Neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents of persian clover were lower than those of other legumes. From the comparison among tedding frequency, NDF and ADF contents of three times were higher than those of one and two times. Relative feed value(RFV) of persian clover hay was the highest(178) and classified as Grade Prime in forage quality standard. Crimson and bolta balansa clovers in the RFV were also high quality as Grade 1 in forage quality standard. The RFV of legume hay was decreased from 150 to 140 as tedding frequency often did Results of the experiment indicate that hay quality of persian clover was higher than other clovers. And this is due to high leaf and stem content, hollow stem and late maturity stage. Then tedding frequency in annual legume can be teded by two times for quality.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.1
• /
• pp.20-35
• /
• 2002

We studied the fishing ground of a yellowtail and oceanographic conditions around Chujado and Marado around Jeju Island from autumn to winter. Also we investigate the forming mechanism of fishing ground around Marado, which shows the best catch of yellowtail near Jeju island. The obtained results are summarized as follow ; 1. When the high temperature water about 15.0∼19.0 in depth of 50m distributed around Chujado and Marado, the fishing ground of Yellowtail is shows a good catch. On the contrary, when the low temperature water about 11.0∼14.0 is shows a poor catch. 2. Fishing grounds of yellowtail by handline fishing are formed with a school of Yellowtail migrating southward from the coastal sea of Korea and slaying around Marado to winter and spawn due to following factors. Firstly, a front of temperature and salinity is formed between inshore water and oceanic water around Marado. Secondly, small-size eddies and excellent horizontal and vortical mix which is created by strong tide and geographical features including irregular underwater ground and an isolated island. An abundant school of yellow tails stays in front of the tide where a good fishing ground was made.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.305-311
• /
• 2017

This study aimed to evaluate the fermentation characteristics of mixed Makgeolli with barley and wheats under, fermentation at different temperatures (20, 25, and $30^{\circ}C$) and time (3, 6, and 9 days). The pH and sugar of mixed Makgeolli were 3.68~4.26 and $12.30{\sim}17.31^{\circ}Brix$, respectively. The total acidity showed proportionate increase with fermentation temperature and time; whereas, reducing sugar contents decreased with increasing fermentation temperature and time. The alcohol contents of mixed Makgeolli varied significantly by fermentation temperature and time (p<0.05). In terms of color values, the L value decreased with increasing fermentation temperatures, and a value increased significantly with increasing fermentation time. The number of microorganisms (yeast, total bacteria and lactic acid bacteria) in mixed Makgeolli decreased progressively with increasing fermentation temperature and time. Among the organic acids (citric, lactic, malic, and pyruvic acids) in mixed Makgeolli, citric and lactic acid was present at the highest concentrations. From these results, the optimum fermentation conditions of mixed Makgeolli with barley and wheat were $20{\sim}25^{\circ}C$ for 6 days.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.197-210
• /
• 2009

To improve the forage quality and reduce nitrogen input, trial was conducted on the effect of seeding method, combination, and nitrogen fertilizer with WCB (whole crop barley) and leguminous plant. Present experiment was carried out by split-split design having seeding methods for main plot, combinations for sub-plot, and nitrogen fertilizers for sub-sub plot with three replications. When WCB and leguminous plant were mixed-sown, WCB showed earlier heading and maturing than those of inter-sown, and the more nitrogen delayed growth stage a little. Occurrence of BaYMV (Barley Yellow Mosaic Virus), a serious disease caused by soil fungi and decrease barley yield, was deterred by mixed-seeding as compared to inter-sown barley a little. Inter-sown WCB increased the number of spike per $m^2$ as compared to mixed-seeding showing more spikes with nitrogen increase. WCB produced much fresh and dry matter yield at mixed-seeding than inter-seeding, and had advantage with hairy vetch (HV). Increased nitrogen showed much forage yield, however, half application of it is considerable for environmental-friendly farming. Electric conductivity (EC) decreased in inter-cropping or mixed-sowing soil with WCB and leguminous crop after harvest. But, organic matter (OM) content of soil after harvesting was vice versa. Acid detergent fiber (ADF) and Neutral detergent fiber (NDF) of WCB plant were higher at mixed-seeding than those of inter-sown ones. It showed increased tendency with time progress.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.138-145
• /
• 2007

The effects of amylopectin and hydrocolloid (locust bean gum and guar gum) content on wheat flour dough and noodle properties were investigated. As the amount of amylopectin increased, the water absorption rate (farinograph), the tension (tension test), the gel stability (freeze-thawing treatment), and the springiness and the cohesiveness (TPA) increased, but the pasting temperature (RVA), the lightness and yellowness (color measurement), and the hardness (TPA) tended to decrease. In sensory evaluations, the scores for cohesiveness, springiness, and acceptability of cooked noodle increased as the proportion of amylopectin increased. The proper combination of amylose/amylopectin ratio and hydrocolloids improved the freeze-thaw stability and the sensory acceptability of wheat flour dough and noodle.