• 제목/요약/키워드: MWF

검색결과 41건 처리시간 0.029초

Voltage Sag Detection Algorithm for Instantaneous Voltage Sag Corrector

  • Lee, Sang-Hoon;Choi, Jae-Ho
    • Journal of Power Electronics
    • /
    • 제2권3호
    • /
    • pp.162-170
    • /
    • 2002
  • Voltage sag detection algorithm for voltage sag corrector is proposed in this paper. To quantify the standard of voltage unbalance under the faulted conditions, the 3-phase unbalanced voltages are decomposed into two balanced 3-phase symmetrical components of the positive and negative sequence voltages, which is defined by the magnitude factor (MF) and unbalance factor (UF). It is analyzed that MWF and UF values are given as the dc constant values even though under the voltage unbalance condition. This paper also proposes the control scheme of the instantaneous voltage sag corrector based on this detection algorithm. The validity of the proposed algorithm is verified through the EMTDC simulation and experiments.

클라우드 서비스 브로커를 통한 응용 실행에서의 가상 머신 할당 기법 분석 (An analysis of VM allocation schemes for application executing via a cloud service broker)

  • 김희재;윤찬현
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2014년도 춘계학술발표대회
    • /
    • pp.112-114
    • /
    • 2014
  • 클라우드(cloud)를 이용한 응용 실행에서 클라우드 서비스 브로커 (cloud service broker, CSB)는 효과적인 자원 사용 및 서비스 수준 협약(service level agreement, SLA) 보장 등의 장점을 가진다. 따라서 본 논문에서는 CSB 를 통한 응용 실행에서의 가상 머신 (virtual machine, VM) 할당 기법들을 소개하며 BestFit (BF), WorstFit (WF), Modified BestFit (MBF), Modified WorstFit (MWF), Reserved Instance-aware Modified BestFit (M-MBF) 의 평균 VM 사용률을 비교한다.

금속가공유 시료에서 일부 Optical Density 설정값에 따른 엔도톡신의 정량 (Analysis of Endotoxin Using Analytical Conditions of Optical Density in Metalworking Fluid Sample)

  • 박동욱;한인영;윤충식;박두용
    • 분석과학
    • /
    • 제15권5호
    • /
    • pp.459-465
    • /
    • 2002
  • 본 연구에서는 금속가공유 (metalworking fluids, MWF)를 취급하는 사업장에서 채취한 벌크시료와 공기중 시료를 대상으로 엔도톡신 (endotoxin)의 정확한 분석을 위한 Optical Density (OD)의 설정조건을 검토하였다. OD값을 설정하는 Onset time방법이 "time to $V_{max}$"방법보다 재현성, 정확성이 높았다. 구체적인 OD설정값은 "0.03"이 가장 적정한 것으로 나타났다. 검량선의 상관계수 (직선성)가 0.998로서 가장 높았고 회수율도 88% - 105% (0.05 EU/mL과 5 EU/mL 범위)로서 다른 OD값 (OD "0.05", OD "0.1", "time to $V_{max}$")보다도 적정하였다. Onset time방법에서 설정해야 할 OD값은 "0.03"과 "0.05"이 적정한 것으로 나타났다. OD "0.03"과 "0.05"에 의한 엔도톡신 분석결과간의 상관계수 ($\gamma$)는 MWF시료에서는 0.97 그리고 공기 중 시료에서는 0.99로 유의하게 나타났다. 따라서 금속가공유를 대상으로 엔도톡신을 분석할 때는 Onset time 방법을 선택하고 구체적인 OD설정 값은 "0.03"과 "0.05"중에서 검량선의 상관성 (linearity)이 0.98 이상을 나타내는 OD값으로 분석하는 것이 적정한 것으로 판단된다.

수용성 금속가공유 폐액의 생물학적 처리 (Biological Treatment on Wastewater of Soluble Metal Working Fluids)

  • 차미선;한창민;박근태;조순자;손홍주;이상준
    • 생명과학회지
    • /
    • 제13권6호
    • /
    • pp.917-923
    • /
    • 2003
  • P. aeruginosa EMS1에 의한 수용성 절삭유의 생물학적 처리를 위한 환경요인과 최적조건을 검토한 결과는 다음과 같다. 절삭유속에 함유된 각종 성분을 이용한 P aeruginosa EMSl의 생육 및 절삭유 분해 가능성을 검토하기 위하여 증류수에 절삭유를 1% 농도로 첨가하여 멸균한 후, P aeruginosa EMSl를 접종하여 균체 생육도 및 COD 제거율을 조사한 결과, 균주의 생육도는 극히 미약하고 약 12%의 COD 제거능을 가지고 있었다. 이것은 균주의 생육과 효율적인 COD제거능을 위하여 절삭유 속에 함유된 성분 외의 다른 일반적인 배지성분이 필요함을 시사한다. P. aeruginosa EMS1에 의한 1% 수용성 절삭유의 COD 제거율과 균주 생육도 향상을 위한 최적 배지조성은 0.3% NH_4NO_3,\; 0.05%\; K_2HPO_4,\; 0.04% KH_2PO_4,\; 0.05%\; MgSO_4.7H_2O,\; 0.03%\; CaCl_2.2H_2O,\; 0.04%\; FeSO_4.7H_2O$이었고, 최적배양 조건은 pH 7,$30^{\circ}C$, 50m$\ell$ / 300m$\ell$flask이었다. 이 조건에서 배양 4일 후, 87%의 COD가 제거되었다. 최적배지에서 COD 제거에 미치는 절삭유 농도의 영향을 조사한 결과, 절삭유 농도가 낮을수록 relative COD(%)가 낮았으며, 균체 생육도가 높음을 알 수 있었다. 따라서 본 연구의 결과를 바탕으로 하여 현재 폐절삭유의 처리를 위해 시행되고 있는 물리화학적 처리 시스템의 후속 공정으로 생물학적 처리시스템을 구축하고, 표준 균주로서 P. aeruginesa EMS1이 사용될 경우, 잔여 절삭유의 완전 분해가 가능할 것으로 사료된다.

금속가공유를 취급하는 남성 근로자의 접촉피부염 (Contact dermatitis among male workers exposed to metalworking fluids)

  • 진영우;이준영;김은아;박승현;채창호;최용휴;김규상
    • Journal of Preventive Medicine and Public Health
    • /
    • 제30권2호
    • /
    • pp.381-391
    • /
    • 1997
  • 산업장에서 사용되는 오일의 종류와 그 폭로 형태의 차이에 따른 피부질환의 유병률과 접촉성 피부질환의 주요특성을 파악하기 위하여 사용오일의 분석, 1회의 방문진찰과 2회에 걸친 설문조사를 실시하였으며, 아래와 같은 결과를 얻었다. 1. 비수용성 절삭유의 분석결과, 탄소수 12-20개 사이의 지방탄화수소(do, tri, tetra... decane)가 49.04%였으며, methy-naphthalene 등의 방향족이 14.90% 기타지방 및 방향족탄화수소화합물이 36.04%였으며, 방청유의 분석결과 대부분(90.99%)이 탄소수 6-9개 사이의 지방족 화합물로 구성되어 있으며, 일부 알콜 및 에스테르계 화합물도 포함되어 있어 두 오일은 서로 다른 물질이며, 따라서 자극성도 다를 것으로 생각된다. 2. 피부과적 진찰 결과, 전 연구대상에서 전체 피부 질환의 빈도(시점유병률)는 17명(연구대상자 100명당 53.1)이었다. 접촉피부염, 오일 여드름과 모낭염의 빈도(시점유병률)는 7명(12.7), 11명(20.0)이었으며, 광알러지성 피부염, 염소성 여드름, 종양, 피부변색은 관찰되지 않았다. 3. 자기기입식 설문조사 결과, 두 군에서 접촉피부염의 누적유병률과 1년간 기간유병률은 연구대상자 100명당 28.4, 16.7와 15.3, 13.0로서 차이를 보였으나, 통계학적으로 유의하지 않았고(p>0.05), 연령과 접촉 기간에 따른 차이는 없었다(p>0.05). 4. 발생까지의 기간은 절삭유접촉군의 경우 4개월 미만이 8명(22.9%)이었고, 26명(74.3%)이 2년 이내인 것으로 나타났으나, 방청유접촉군의 경우 응답자 6명 중 4명(66.7%)이 2년 이후로 대답해 군간에 뚜렷한 차이를 보였으며(p<0.05), 10년 이상인 경우도 절삭유 접촉군에서 2명, 방청유접촉군에서 1명이 있었다. 호발계절은 절삭유접촉군의 경우 응답자 41명중 16명(42.1%)이 여름에 가장 많은 것으로 답하였으나 방청유접촉군의 경우 계절에 따른 차이를 보이지 않았다(p>0.05). 5. 유병기간은 양 군에 차이가 없었으며(p>0.05), 68.6%가 1개월 이내에 회복되는 것으로 나타났고, 6개월이상 잘 낫지 않는 정우도 3명(7.9%)이 있었다. 재발횟수는 절삭유접촉군에서는 1년에 수회가 응답자 15명(44.1%)로 가장 많았으나, 방청유접촉군에서는 1회로 끝난 경우가 3명(42.9%)로 가장 많았고, 전체 응답자 41명중 26명(63.4%)이 1년에 1회 이상 재발하는 것으로 나타났다. 6. 주요 발생형태로는 홍반성 구진이 절삭유접촉군과 방청유접촉군에서 각각 21명(60.0%), 6명(85.7%), 전체적으로는 27명(64.3%)으로서 가장 많았으며, 수포 형성이 각각 12명(34.3%), 1명(14.3%), 전체적으로 13명(31%)로 나타났다. 7. 처음 접촉피부염 발생시 보호구를 착용했다는 응답이 38명(86.8%)으로 대부분이었으나, 24명(68.6%)이 보호구의 종류로서 면장갑을 착용한다고 하였으며, 그 외 고무장갑이나 비닐장갑을 이용했던 것으로 나타났다. 8. 피부염발생시 치료 여부에 대해 22명(51.1%)이 약국이나 병원을 이용하는 것으로 나타났으며, 개인위생에 신경 쓴다, 별 조치를 취하지 않는다, 사내의무실을 이용한다가 각각 11명(27.9%), 6명(14.0%), 3명(7.0%)로 대부분 자비를 부담하여 치료를 하는 것으로 나타났다. 9. 피부염의 발생에 대해 느끼는 정도를 묻는 질문에 대해 절삭유접촉군에서는 16명(47.1%)이 심각하다라는 응답을 하였으나, 방청유접촉군에서는 응답한 6명 모두가 별로 심각하지 않다라고 하여 대조를 보였다. 이상의 결과, 오일로 인한 사업장의 피부질환조사 시에는 접촉 수준(빈도와 양), 접촉물질의 종류를 정확히 파악하는 것이 중요하고, 적절한 조사시기(계절)가 고려되어야 하며, 접촉피부염의 예방을 위해서는 적절한 보호구와 보건교육이 필요하다는 것을 알 수 있었다. 또한 대규모 집단을 대상으로 접촉피부염의 유병률 특히, 기간유병률 등을 파악하는데 있어, 설문 조사가 주요한 도구가 될 수 있으므로, 이에 대한 연구가 필요하다고 생각된다.

  • PDF

금속가공유 노출과 암 발생위험역학조사에서 금속가공유 노출 평가 방법에 대한 고찰 (Critical Literature Review on Exposure Assessment Methods for Metalworking Fluids in Epidemiological Cancer Study)

  • 박동욱
    • 한국산업보건학회지
    • /
    • 제17권4호
    • /
    • pp.282-288
    • /
    • 2007
  • 그 동안 많은 역학연구를 통해서 금속가공유(metalworking fluid, MWFs) 노출과 여러 조직에서 암 발생 위험과의 관계를 밝혔지만, 금속가공유 종류(비수용성, 수용성, 합성, 준합성)별로 구분된 위험은 아직 완전하게 규명되지 않았다. 역학조사에서 금속가공유 노출을 대체할 수 있는 인자(surrogate)로서 정성적(qualitative), 명목적(ordinal) 혹은 준정량적인(semi-quantitative) 변수들(금속가공유에 대한 노출 유무, 노출 정도: 높음, 낮음 등, 직업 유무, 근무기간 등)을 이용하여 금속가공유 노출을 평가하였다. 이러한 노출평가방법은 기본적으로 금속가공유 노출 강도(intensity)가 고려되지 않을 뿐만 아니라 노출 분류 오류(misclassification)도 항상 존재할 수 있어 금속가공유 노출은 물론이고 종류별 위험을 밝히기 어렵다. 일부 역학연구에서 금속가공유 종류별 누적 노출양(cumulative exposure level)과 암위험과의 관계를 밝혔다. 이러한 연구결과들은 모두 금속가공유 종류별로 과거노출을 추정할 수 있는 자료(정량적인 노출평가자료, 과거직업력, 취급했던 금속가공유 종류 등)가 잘 기록되어 있는 1개의 대규모 자동차공장에서 나온 것들이다. 따라서 금속가공유에 대한 노출자료가 부족하고 사용특성에 대한 기록이 없거나 부족한 일반 인구나 산업을 대상으로 한 역학연구에서는 금속가공유의 종류별 위험을 밝히는것은 불가능하다. 금속가공유 종류별로 과거 노출에 대한 확률(probability)을 추정하는데 일반적으로 활용할 수 있는 노출확률 메트릭스를 개발하는 것이 필요하다.

원심력 필터 재생기능을 갖춘 오일 미스트 여과 집진장치 개발 (Development of an Oil Mist Collector Equipped with Centrifugal De-oiling System)

  • 김태형;서정윤;하현철;김종철;조진호
    • 한국산업보건학회지
    • /
    • 제15권3호
    • /
    • pp.166-175
    • /
    • 2005
  • Health effects associated with metal working fluid (MWF) exposures include dermatitis, respiratory disease, hypersensitive pneumonitis, and asthma. Frequently, occupational exposures to MWFs are controlled by ventilating an enclosure with an air cleaning unit that includes a fan preceded by various kinds of filtration. There are several kinds of air cleaning units used in machining centers. But the associated troubles have hindered from efficiently using these devices. The main problem is the relatively short period of filter replacement. The reason is that the air cleaning units usually do not have the de-oiling systems, thus leading the earlier clogging of filters and reducing the flow rate of hood. Thus, the first stage of study was conducted to overcome this problem by developing the new oil mist collector equipped with the easy de-oiling system. The principle of de-oiling is that the centrifugal force generated by spinning the drum covered by filter fabric separates oils from the filter fabric. It would be very similar to the spin-dry laundry. By adopting this de-oiling technique, the problems associated with the conventional oil mist collectors could be solved. Several tests/analyses were performed to make the lab-scale oil mist collector. The collection efficiencies and the de-oiling efficiencies of commercially available filter fabrics were tested. Subsequently, the endurance test were conducted by observing SEM photos of filter fabrics and measuring tensile strength/expansion coefficient after spinning the filter drum for 20 minutes at the different rotation speeds. By doing these experiments, the most appropriate filter fabric and rotation speed/duration were selected. Finally, the new oil mist collector was designed. In the near future, this device must be tested in the real machining center.

수용성 금속가공유 취급사업장에서 세균농도와 환경인자의 관계에 대한 연구 (A Study of the Relations between the Bacterial Concentration and the Environmental Factors in the Factories using Water Soluble Metal Working Fluids)

  • 박해동;박현희;김정현;장재길
    • 한국산업보건학회지
    • /
    • 제22권4호
    • /
    • pp.284-292
    • /
    • 2012
  • Objectives: The objective of this study was to investigate the relations between the bacterial concentration and the environmental factors in the water soluble metal working fluids at factories. Methods: The bacterial concentrations for airborne and fluid samples of 7 factories were quantified during the summer season. And we statistically analysed the relations between the bacterial concentrations and the factors such as temperature, relative humidity, usage quantity, mixing ratio and exchange interval. Results: The geometric mean levels of the airborne bacterial concentrations were 79.1(range : N.D.~686) $CFU/m^{3}$ and 68.1(range: N.D.~919) $CFU/m^{3}$ in the process and outdoor. The airborne bacterial concentrations showed no statistical difference by process, usage quantity, mixing ratio and exchange interval. The airborne bacterial concentrations had negatively weak correlations with air temperature and relative air humidity(p<0.05). The bacterial concentrations and pH showed significantly negative correlations in the fluids(p<0.05). And the airborne bacterial concentrations in factories and those in metal working fluids showed no statistical relationship. Conclusions: In the water soluble metal working fluids using factories, the airborne bacterial concentrations of the process were related to those of the outdoor and environmental factors, rather than the onsite contaminated metal working fluids.

Vaporization and Conversion of Ethanolamines used in Metalworking Operations

  • Kim, Shin-Bum;Yoon, Chung-Sik;Park, Dong-Uk
    • Safety and Health at Work
    • /
    • 제1권2호
    • /
    • pp.175-182
    • /
    • 2010
  • Objectives: This study examined how ethanolamines (EAs) with the same functional alcohol group ($HOCH_2CH_2$), such as mono-EA (MEA), di-EA (DEA), and tri-EA (TEA), in water-based metalworking fluids (wbMWFs) are vaporized, condensed, and transformed by heat generated during metalworking. Methods: Two types of experimental apparatus were manufactured to achieve these objectives. Results: Vaporization tests using a water bath showed that the vaporization rate increased markedly from $0.19\;mg/m^2{\cdot}min$ at $23.5^{\circ}C$ to $8.04\;mg/m^2{\cdot}min$ at $60^{\circ}C$. Chamber tests with a heat bulb revealed that "spiked" MEA was fully recovered, while only 13.32% of DEA and no TEA were recovered. Interestingly, non-spiked types of EAs were detected, indicating that heat could convert EAs with more alcohol groups (TEA or DEA) into other EAs with fewer group(s) (DEA or MEA). The EA composition in fresh fluid was 4% DEA, 66% TEA, and 30% MEA, and in used fluids (n = 5) was 12.4% DEA, 68% TEA, and 23% MEA. Conversion from TEA into DEA may therefore contribute to the DEA increment. Airborne TEA was not detected in 13 samples taken from the central coolant system and near a conveyor belt where no machining work was performed. The DEA concentration was $0.45\;mg/m^3$ in the only two samples from those locations. In contrast, airborne MEA was found in all samples (n = 53) regardless of the operation type. Conclusion: MEAs easily evaporated even when MWFs were applied, cleaned, refilled, and when they were in fluid storage tanks without any metalworking being performed. The conversion of TEA to DEA and MEA was found in the machining operations.

Microbial Exposure Assessment in Sawmill, Livestock Feed Industry, and Metal Working Fluids Handling Industry

  • Park, Hyun-Hee;Park, Hae-Dong;Lee, In-Seop
    • Safety and Health at Work
    • /
    • 제1권2호
    • /
    • pp.183-191
    • /
    • 2010
  • Objectives: The objective of this study is to investigate the distribution patterns and exposure concentrations of bioaerosols in industries suspected to have high levels of bioaerosol exposure. Methods: We selected 11 plants including 3 livestock feed plants (LF industry), 3 metal working fluids handling plants (MWFs industry), and 5 sawmills and measured total airborne bacteria, fungi, endotoxins, as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage cascade impactor, and gelatin filters. Endotoxins were measured with polycarbonate filters. Results: The geometric means (GM) of the airborne concentrations of bacteria, fungi, and endotoxins were 1,864, $2,252\;CFU/m^3$, and $31.5\;EU/m^3$, respectively at the sawmills, followed by the LF industry (535, $585\;CFU/m^3$, and $22.0\;EU/m^3$) and MWFs industry (258, $331\;CFU/m^3$, and $8.7\;EU/m^3$). These concentrations by industry type were significantly statistically different (p < 0.01). The ratio of indoor to outdoor concentration was 6.2, 1.9, 3.2, and 3.2 for bacteria, fungi, endotoxins, and dust in the LF industry, 5.0, 0.9, 2.3, and 12.5 in the MWFs industry, and 3.7, 4.1, 3.3, and 9.7 in sawmills. The respiratory fractions of bioaerosols were differentiated by bioaerosol types and industry types: the respiratory fraction of bacteria in the LF industry, MWF industry, and sawmills was 59.4%, 72.0%, and 57.7%, respectively, and that of fungi was 77.3%, 89.5%, and 83.7% in the same order. Conclusion: We found that bioaerosol concentration was the highest in sawmills, followed by LF industry facilities and MWFs industry facilities. The indoor/outdoor ratio of microorganisms was larger than 1 and respiratory fraction of microorganisms was more than 50% of the total microorganism concentrations which might penetrate respiratory tract easily. All these findings suggest that bioaerosol in the surveyed industries should be controlled to prevent worker respiratory diseases.