• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.576-585
• /
• 2014

In this paper, we survey the Moving Target Indication(MTI) techniques for small UAVs. MTI consists of image alignment phase and frame differencing correction phase, and image alignment has two ways of parametric approach which is mainly focused in this paper and non-parametric approach. Since small UAVs are operated in the low altitude, the parallax is considerable and the epipolar geometry is applied to compensate the parallax. The related works and future works are presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.12
• /
• pp.1189-1195
• /
• 2014

This paper addresses a Moving Target Indication (MTI) algorithm which can be used for small Unmanned Aerial Vehicles (UAVs) equipped with image sensors. MTI is a system (or an algorithm) which detects moving objects. The principle of the MTI algorithm is to analyze the difference between successive image data. It is difficult to detect moving objects in the images recorded from dynamic cameras attached to moving platforms such as UAVs flying at low altitudes over a variety of terrain, since the acquired images have two motion components: 'camera motion' and 'object motion'. Therefore, the motion of independent objects can be obtained after the camera motion is compensated thoroughly via proper manipulations. In this study, the camera motion effects are removed by using wiener filter-based image registration, one of the non-parametric methods. In addition, an image pyramid structure is adopted to reduce the computational complexity for UAVs. We demonstrate the effectiveness of our method with experimental results on outdoor video sequences.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.299-311
• /
• 2011

In this paper, we have identified the system instability factors in a bistatic radar system using pulse chasing and considered their effects on the bistatic receiver's MTI(Moving Target Indication) improvement performance. The pulse chasing is a scan method that searchs a restricted area on the transmit pulse-to-pulse basis and the MTI filter is a signal processing that separates a target from some kinds of interferences such as clutter using small number of transmit pulses. Ideal MTI processing performance, e.g., clutter attenuation and improvement, has been limited by the property of the clutter itself, however, the MTI performance in a proposed bistatic receiver configuration could be affected by the receiving beam pointing error during pulse chasing scanning. Also, for the bistatic receiver, we have defined other system instability factors, which result from the time synchronization error, COHO's phase error, the frequency/phase synchronization error, and have analyzed their effects on the system performance improvement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1412-1422
• /
• 2010

A bistatic radar using the pulse chasing can detect a target to track successive transmitted pulses using a receive beam for effectively scanning the cosite search area. When tracking a transmitted pulse with the receive beam, some beam pointing errors within pulse-to-pulse can cause the timing error in received pulse and the variation of the signal strength. In this paper, we have proposed that some errors due to the receive beam pointing error could limit the MTI filter's performance and derived that the relationship between the MTI performance and the geometric factors which are the inherent properties in bistatic configuration. Through the simulation, we have considered the limitations of the improvement performance restricted by the receiving beam pointing error and confirmed the contribution to the performance improvement in maintaining the receiving beam pointing error of under 0.5 degrees.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.114-122
• /
• 2011

In this paper, we have identified the system instability factors in a bistatic radar system using pulse chasing and considered their effects on the bistatic receiver's MTI(Moving Target Indication) improvement performance. The pulse chasing is a method to efficiently scan a restricted search area within the limited transmitter power and time in a bistatic radar and to track a series of transmitted pulses using the receiver beam which has ideally matched to the pulse propagation rate. In this paper, we have discussed the interrelationship between the pulse chasing and time and frequency/phase synchronization and described the effects of the identified system instability factors on two kinds of MTI filter configuration, single delay-line and double delay-line, in the bistatic radar. And also, we have confirmed that the overall system improvement is restricted by a lower improvement factor among identified them, and discussed the allowable tolerance of the time and frequency/phase synchronization in the bistatic system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.47-58
• /
• 2011

MTI filter is used to separate target signal from clutter in many radar signal processing. By suppressing clutter before CFAR detection, the detection performance can be improved. As a radar system designed, a design engineer generally takes averaged SNR and CNR into account and does not include the effect of MTI filter's frequency response. In practice, when the signals including clutter are pass through the filter, SNR is widely varying according to target velocity and CNR is also varying according to clutter center frequency and spectrum spreading. In this paper, we have derived the relationship between the MTI filter's frequency response and a target's velocity and a clutter's spectrum characteristics. With the variation of SNR and CNR at the filter output, the detection performance of CFAR has been analyzed by the simulation and has made certain of their influences on the performance.

• ICROS
• /
• v.20 no.4
• /
• pp.37-43
• /
• 2014

소형 무인항공기가 발달함에 따라 영상센서의 활용이 증가하였다. 특히 발전된 컴퓨팅 파워와 소형화된 영상센서의 발달로 무겁고 값비싼 레이더 장비의 기술을 영상센서로 구현하는 연구가 활발히 진행 중이다. 영상 이동표적표시(Moving Target Indication MTI) 기법은 이런 시대의 흐름에 따라 발달된 기술이며 현재 미군의 소형무인항공기 RQ-11 Raven에 상용화 되었다. 본 논문에서는 소형 무인항공기용 영상 MTI 기법의 원리를 설명하고 영상 MTI에서 주로 사용하는 카메라 운동 보 정 기법인 매개변수/비매개변수 방식의 영상정합의 접근법을 위주로 설명하였다. 또한 소형 무인항공기용 영상감시시스템 구현에서 가장 큰 문제점인 시차/항공기 진동 보정에 대한 진행 중인 연구논문도 소개하였다.