• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.610-626
• /
• 1995

Perforations especially in the furcations during endodontic treatment have notably detrimental effect on prognosis. The purpose of this study was to compare radiographically and histologically the sealing ability and the tissue responses of amalgam, Ketac-Silver, IRM, Vitapex, and mineral trioxide aggregate(MTA) used to repair furcation perforations. Thirty two experimental furcation perforations were created in the mandibular premolars of 6 mongrel dogs and immediately repaired with experimental materials. The animals were sacrificed after 16 weeks and radiographic and histopathologic results were evaluated. The following conclusions were drawn within the limits of the experimental results; 1. All materials tested in this experiment revealed a certain degree of extrusion into the periodontal space. 2. Both amalgam and Ketac-Silver showed the greatest degree of inflammation and bone resorption(p<0.0001). There was no significant difference between the amalgam and Ketac-Silver groups. 3. Both IRM and Vitapex showed a markedly milder degree of inflammatin and less bone resorption than amalgam or ketac-siver(p<0.00005). both IRM and vitapex showed the same respone. 4. MTA showed the least degree of Inflammation and bone resorption(p<0.05). The results of this experiment indicate that among the different materials tested, MTA appeared to be the best material for sealing furcation perforations, although the radiographic and histopathologic differences between the MTA and Vitapex groups were not statistically significant. But further studies with a larger sample are needed to have the exact conclusions.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.272-278
• /
• 2012

Effects of ceramics on the microwave dielectric properties of polytetrafluoroethylene (PTFE) composites filled with $MgTiO_3$ (MTi) and/or $MgTa_2O_6$ (MTa) were investigated. The dielectric constant ($K$), quality factor ($Qf$), and temperature coefficient of resonant frequency ($TCF$) of the composites were dependent on the type and volume fraction ($V_f$) of the ceramics. For the composites mixed with MTa and MTi, the $K$ and $TCF$ values decreased with increasing MTi content. The $Qf$ values of the composites were affected by relative density. The measured $K$ values of the composites were compared with those predicted by several theoretical models. Good microwave dielectric properties with values of $K$=3.6, $Qf$ = 7,788 GHz, and $TCF$ = -0.19 ppm/$^{\circ}C$ were obtained for the composites with 0.1 $V_f$ ceramics (mixed 0.025MTa and 0.075MTi).

• International Journal of CAD/CAM
• /
• 제12권1호
• /
• pp.20-28
• /
• 2012

Finite Element Analysis (FEA) is often used to identify local stress/strain concentrations where a component is likely to fail. In order to reduce the degree of strain concentration, component thickness can be increased in those regions, or a stronger material can be used. In short fiber reinforced composite materials, strength and stiffness can be increased through proper fiber alignment. The field-aided microtailoring (FAiMTa) process is one promising method for doing this. FAiMTa uses principles of dielectrophoresis to preferentially align particles or fibers within a matrix. To achieve the preferred fiber orientation, an interdigitated electrode network must be integrated into the mold halves which can be fabricated by additive manufacturing (AM) processes. However, the process of determining the preferred fiber arrangements and electrode locations can be very challenging. This paper presents algorithms to semi-automate the interdigitated electrode design process. The algorithm has been implemented in the Solidworks CAD system and is demonstrated in this paper.

• 대한장애인치과학회지
• /
• 제7권2호
• /
• pp.99-102
• /
• 2011

A-12year-old boy visited the clinic with chief complaint of anterior maxillary trauma. He was diagnosed with first degree mental retardation and cerebral disorders. By clinical and radiographic examination, intrusion of maxillary central incisors were found. The intrusion was not severe, teeth were luxated with a slight force and the prognosis was followed. After the first year, external root resorption was seen radiographically. Due to difficult behavior management, one visit root canal filling with OrthoMTA(BioMTA, Korea) which is known to generate of cementum and periodontal ligament was planned along with general anesthesia. OrthoMTA was filled from the apex to 1-2mm below cervical area and composite resin used for crown restoration. 6 months after, further resorption, discoloration and mobility was not found. This case is currently checked yearly and further research is needed for inflammatory root resorption and ankylosis.

• Restorative Dentistry and Endodontics
• /
• 제43권3호
• /
• pp.24.1-24.12
• /
• 2018

Objectives: The aim of this in vitro study was to evaluate the biocompatibility of newly proposed root-end filling materials, Biodentine, Micro-Mega mineral trioxide aggregate (MM-MTA), polymethylmethacrylate (PMMA) bone cement, and Smart Dentin Replacement (SDR), in comparison with contemporary root-end filling materials, intermediate restorative material (IRM), Dyract compomer, ProRoot MTA (PMTA), and Vitrebond, using human periodontal ligament (hPDL) fibroblasts. Materials and Methods: Ten discs from each material were fabricated in sterile Teflon molds and 24-hour eluates were obtained from each root-end filling material in cell culture media after 1- or 3-day setting. hPDL fibroblasts were plated at a density of $5{\times}10^3/well$, and were incubated for 24 hours with 1:1, 1:2, 1:4, and 1:8 dilutions of eluates. Cell viability was evaluated by XTT assay. Data was statistically analysed. Apoptotic/necrotic activity of PDL cells exposed to material eluates was established by flow cytometry. Results: The Vitrebond and IRM were significantly more cytotoxic than the other root-end filling materials (p < 0.05). Those cells exposed to the Biodentine and Dyract compomer eluates showed the highest survival rates (p < 0.05), while the PMTA, MM-MTA, SDR, and PMMA groups exhibited similar cell viabilities. Three-day samples were more cytotoxic than 1-day samples (p < 0.05). Eluates from the cements at 1:1 dilution were significantly more cytotoxic (p < 0.05). Vitrebond induced cell necrosis as indicated by flow cytometry. Conclusions: This in vitro study demonstrated that Biodentine and Compomer were more biocompatible than the other root-end filling materials. Vitrebond eluate caused necrotic cell death.

• 한국식품영양과학회지
• /
• 제44권5호
• /
• pp.649-656
• /
• 2015

무지개송어 아가미상피세포를 이용하여 cortisol에 의해 유도된 세포 손상에 대항하는 아연의 보호 효과를 연구하였다. 24시간 동안 cortisol에 노출된 세포들은 농도 의존적으로 LDH 방출이 증가하였고, 세포 생존율은 감소하였다. 아연($100{\mu}M$ $ZnSO_4$) 처리에 의해 이와 같은 영향이 감소하였고, 아연은 cortisol에 의해 유도된 caspage-3 활성, 즉 apoptosis에 대항하여 세포를 보호하였다. Cortisol에 의해 유도된 세포 사멸, LDH 방출과 caspase-3 활성은 glucocorticoid 수용체의 길항제인 Mifepristone(RU-486) 처리에 의해 차단되었는데, 이것은 세포 손상이 cortisol과 관련이 있다는 것을 제안하였다. 더하여 cortisol에 의해 유도된 세포 손상 모델에서 MT, GST 그리고 G6PD와 같은 항산화 유전자 발현에 대한 아연의 영향을 연구했다. MTA, MTB, GST 그리고 G6PD mRNA 수준은 아연과 cortisol을 각각 단독 처리에 의해 그리고 아연과 cortisol을 동시 처리에 의해 증가하였다. 이와 같은 증가는 아연이나 cortisol 단독 처리보다는 $100{\mu}M$ $ZnSO_4$와 $1{\mu}M$ cortisol을 동시에 처리했을 때 MTA, MTB, GST 그리고 G6PD mRNA 수준이 더 높았다. 아연 처리에 의해 세포 내 자유 아연 농도가 증가하였고, 이와 같은 반응은 cortisol과 아연을 함께 처리했을 때 세포 내 자유 아연 농도가 더 증가하였다. 결론적으로 아연 처리는 간접적인 항산화 활성을 통해 cortisol에 의해 유도 세포독성 및 apoptosis를 저해하였다.

• 대한소아치과학회지
• /
• 제45권4호
• /
• pp.455-463
• /
• 2018

이 연구의 목적은 근관 내 약제가 규산칼슘 재료의 압출 강도(Push-out bond strength)에 미치는 영향을 평가하는 것이다. 단일 근관을 가진 40개의 인간 하악 소구치들은 대조군과 수산화칼슘, 이중 항생제, 삼중 항생제를 사용한 군 중 하나로 나뉘어졌다. 근관 세척을 통해 약제를 제거 후, 1 mm 두께로 시편들을 제작하였다. 그 후 ProRoot MTA$^{(R)}$와 Biodentine$^{(R)}$을 근관 내에 적용하였고, 압출 강도 실험과 파절 양상 관찰을 수행하였다. 삼중 항생제와 이중 항생제 군은 대조군과 비교하여 두 종류의 규산칼슘 기반 재료의 상아질 결합력에서 유의한 영향을 미치지 않았고, 수산화칼슘을 사용한 군은 유의한 결합력의 증가를 나타내었다. 대조군과 각각의 실험군 내에서 치근 상아질에 대한 Biodentine$^{(R)}$의 탈락 저항은 ProRoot MTA$^{(R)}$보다 크게 나타났다. 파절 양상에 따라 응집 파절, 혼합 파절, 접착 파절의 순서로 압출 강도의 유의한 감소가 나타났고, 대조군과 비교하여 수산화칼슘을 사용한 군에서는 응집 파절이, 항생제를 사용한 군에서는 접착 파절이 우세하였다.

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.76-87
• /
• 1999

The effect of retrograde root-end filling materials(IRM, Super-EBA, Vitremer, MTA) on human periodontal ligament fibroblasts and osteoblasts was observed. The cell activities were evaluated by MTT assay, protein assay and alkaline phosphatase activity examination. The results as follows ; 1. After 24hrs culture, both E1 cells & PDL fibroblast adding root-end filling materials were suppressed cell activities but after 48hrs, cell activities were recovered. 2. Cell activity was lowest in Vitremer followed by IRM, MTA, Super-EBA. 3. Cell activity depression by Vitremer was not concerned with pH changes. 4. Protein synthesis by root-end filling materials were not significant difference in Both E1 cell & PDL fibroblasts but protein synthesis were a little increased by Super-EBA. 5. Alkaline phosphatase activity was increased in E1 cell by Super-EBA & MTA but was not significant differences in E1 cell by IRM & Vitremer. Alkaline phosphatase activity was a little depressed in PDL fibroblast by Vitremer. This findings suggest that these root-end filling materials may have important roles in promotion of PDL healing and consequently may be useful for clinical application in apical surgery.

• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.3.1-3.10
• /
• 2020

Objectives: This study investigated the indirect effect of calcium-enriched mixture (CEM) cement and mineral trioxide aggregate (MTA), as 2 calcium silicate-based hydraulic cements, on human dental pulp stem cells (hDPSCs) through different dentin thicknesses. Materials and Methods: Two-chamber setups were designed to simulate indirect pulp capping (IPC). Human molars were sectioned to obtain 0.1-, 0.3-, and 0.5-mm-thick dentin discs, which were placed between the 2 chambers to simulate an IPC procedure. Then, MTA and CEM were applied on one side of the discs, while hDPSCs were cultured on the other side. After 2 weeks of incubation, the cells were removed, and cell proliferation, morphology, and attachment to the discs were evaluated under scanning electron microscopy (SEM). Energy-dispersive X-ray (EDXA) spectroscopy was performed for elemental analysis. Alkaline phosphatase (ALP) activity was assessed quantitatively. The data were analyzed using the Kruskal-Wallis and Mann-Whitney tests. Results: SEM micrographs revealed elongated cells, collagen fibers, and calcified nucleations in all samples. EDXA verified that the calcified nucleations consisted of calcium phosphate. The largest calcifications were seen in the 0.1-mm-thick dentin subgroups. There was no significant difference in ALP activity across the CEM subgroups; however, ALP activity was significantly lower in the 0.1-mm-thick dentin subgroup than in the other MTA subgroups (p < 0.05). Conclusions: The employed capping biomaterials exerted biological activity on hDPSCs, as shown by cell proliferation, morphology, and attachment and calcific precipitations, through 0.1- to 0.5-mm-thick layers of dentin. In IPC, the bioactivity of these endodontic biomaterials is probably beneficial.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.25.1-25.10
• /
• 2019

Objective: The aim of this study was to evaluate discoloration of teeth undergoing regenerative endodontic procedures (REPs) using blood clot or platelet-rich fibrin (PRF) as the scaffolds and different calcium silicate-based materials as the intracanal coronal barriers in an ex vivo model. Materials and Methods: Forty-eight bovine incisors were prepared and disinfected using 1 mg/mL double antibiotic paste (DAP). The specimens were then randomly divided into 2 groups (n = 24) according to the scaffolds (blood or PRF). After placement of scaffolds each group was divided into 2 subgroups (n = 12) according to the intracanal coronal barriers (ProRoot MTA or Biodentine). The pulp chamber walls were sealed with dentin bonding agent before placement of DAP and before placement of scaffolds. The color changes (${\Delta}E$) were measured at different steps. The data were analyzed using 2-way analysis of variance. Results: Coronal discoloration induced by DAP was not clinically perceptible (${\Delta}E{\leq}3.3$). Regarding the type of the scaffold, coronal discoloration was significantly higher in blood groups compared with PRF groups at the end of REP and after 1 month (p < 0.05). However, no significant difference was found between PRF and blood clot after 6 months (p > 0.05). Considering the type of intracanal coronal barrier, no significant difference existed between ProRoot MTA and Biodentine (p > 0.05). Conclusions: With sealing the dentinal tubules of pulp chamber with a dentin bonding agent and application of DAP as an intracanal medicament, coronal color change of the teeth following the use of PRF and blood sealed with either ProRoot MTA or Biodentine was not different at 6-month follow-up.