• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.121-128
• /
• 2005

In most researches on the ride comfort analysis of passenger vehicles, the flexibility of the vehicle body has been not considered as an important factor, because the resonance frequencies of the vehicle body related to pitching, yawing and rolling motions are below 10Hz while the resonance frequencies of the vehicle body related to the flexibility are above 20Hz approximately. Nevertheless, the paper shows that the consideration of the local flexibility (or local stiffness) of the 4 corners on which shock absorbers are mounted influences the ride comfort. A simple beam model is devised to qualitatively examine the effect of the change of the local stiffness of the vehicle body on the ride comfort. Based on the results obtained from the analysis of the one-dimensional model, multi-body dynamic analysis considering the flexibility of the vehicle body is performed using ADAMS and MSC/NASTRAN. Natural frequencies and mode shapes computed by MSC/NASTRAN are used as input data for multi-body dynamic analysis in ADAMS. Through simulations using ADAMS, it has been found that the ride comfort can be improved by changing the local stiffness of the vehicle body and that the simulation results agree with experiment results.

• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.687-694
• /
• 2019

초경량 항공기 구조의 날개 보로 사용되는 원통형 복합재료 날개 보는 굽힘 모멘트와 전단하중을 동시에 받고 있는 구조물이다. 하지만 기존의 일반 원통형 보는 상하부의 굽힘 모멘트, 좌우부의 전단하중을 지지하는 구조적 특성을 고려하지 못하므로 비효율적일 수 있다. 따라서 섬유각 또는 복합재료를 적절히 배열하여 효율적으로 구조물을 만드는 것이 필요하다. 본 연구에서는 원통형 복합재료 보의 굽힘강도와 전단강도의 증가를 위해 보의 단면을 상하좌우로 분할하여 적층순서를 달리함으로써 효율적인 하중지지가 가능하게 하였다. 상용 프로그램 MSC/NASTRAN을 이용한 구조해석을 통해 원호 분할각과 섬유각에 따른 수직변위, 수직변형률, 전단변형률 계산하였다. 계산 결과에 따르면 새롭게 제안된 원통형 보의 분할각과 섬유 방향각을 선택하여 구조 강도를 증가시킬 수 있음을 제시하였다.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.791-800
• /
• 2022

능동 진동 제어 시스템(Active vibration control system, AVCS)을 이용하여 헬리콥터 기체의 능동 진동 제어 시 우수한 진동 제어 성능을 얻기 위하여서는 진동 상쇄 하중 발생기의 개수, 위치 및 하중 방향의 조합의 최적화가 중요하다. 따라서 고려 가능한 모든 하중 발생기의 조합에 대하여 헬리콥터 기체에 대한 AVCS의 진동 제어 성능을 조사하기 위해 Exhaustive 시험 기법을 적용한 AVCS 프레임워크를 구축하였다. 로터 진동 하중 해석, 기체 진동 응답 해석 및 AVCS 시뮬레이션 연구를 수행하기 위해 DYMORE II, MSC.NASTRAN 및 MATLAB Simulink 등 다양한 프로그램을 사용하였다. 이를 이용하여 비행 속도 158 knots의 UH-60A 헬리콥터에 대한 AVCS 적용을 위한 CRFG 조합을 최적화하였다. 최적의 CRFG 조합이 적용된 AVCS를 통해 UH-60A 헬리콥터의 4P 기체 진동 응답을 능동 제어한 결과, 기체의 주요 위치에서 4P 기체 진동 응답이 19.35~98.07%만큼 감소될 수 있었다.

• Composites Research
• /
• 제20권3호
• /
• pp.43-49
• /
• 2007

회전원판의 동적 불안정성은 회전속도를 제한하는 가장 중요한 요인이다. 복합재료를 회전원판에 적용시킬 경우 동적 안정성을 증가시킬 수 있어 경량화와 고속화를 동시에 이룰 수 있다. 티모쉔코 효과라고 불리는 횡전단변형과 회전관성이 판 구조물의 동적거동에 미치는 영향은 많은 연구가 진행되어왔으나 원판의 회전이 이 효과에 미치는 영향에 대한 연구는 극히 제한적이며 복합재료 원판의 경우는 전무한 실정이다. 본 연구에서는 티모쉔코 효과를 고려한 직교이방성 회전원판의 동적 방정식을 유도하였으며 상용 유한요소 프로그램인 MSC/NASTRAN을 이용하여 진동해석을 수행하였다. 해석결과에 따르면 특정 모드에서는 일반적으로 알려진 바와는 달리 회전수의 증가에 따라 티모쉔코 효과가 감소하다 증가하는 현상을 보였다. 또한 데이터만을 기초로 회전증가에 따른 티모쉔코 효과의 감소는 두께비가 작아질수록 증가하고, 반경비, 탄성계수 대 전단계수 비, 진동 모드 수가 커질수록 증가하는 것으로 결론지을 수 있다.

• Journal of Ship and Ocean Technology
• /
• 제3권2호
• /
• pp.27-48
• /
• 1999

The paper is concerned with application to develop the expert system, which structural analysis and design process for tower cranes. The system is organized into three groups. One is pre-processor for creating input data files, another is `model former' which combines knowledge-base with inference engine for automatic generating structural analysis models, a third is application group for final analysis checks. In this study, geometric subroutine of `model former' designates node positions, nodes, elements numbers and element types. Load data subroutine computes weight of tower crane and device, slewing force, cargo load, wind force form rules or equations in knowledge-base. Also, Property and boundary subroutine applies element properties and boundary conditions to suitable elements and nodes. Design and analysis expert system for tower crane integrates these subroutine, `model former' and pre-processor. RBR(Rule-Base Reasoning) was adopted for a reasoning strategy of this expert system. And this expert system can produce structural analysis model and data, which can be used in ordinary structural analysis program (SAP, ADINA or NASTRAN, etc.). In this paper, this expert system produces format of the analysis model data, which are used in MSC/NASTRAN. The main discussions included in the paper are introduction of the tower crane and structural analysis, composition of the design expert system for tower crane and structural analysis using the expert system.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.56-64
• /
• 2002

본 연구에서는 다중 적층 구조의 스마트 스킨에 대한 개념 설계, 제작을 하였으며, 압축 실험을 통해 스마트 스킨의 거동 특성을 확인하였다. 상용 유한요소 소프트웨어인 NASTRAN 을 이용한 선형 압축 해석을 통해 스마트 스킨의 층별 응력 분포를 예측하였으며, 최초 파괴층을 예측하였다. 압축 시험과 선형 비선형해석 결과를 비교하여 유한요소 모델의 신뢰도를 검증하였으며, 본 모델을 이용한 설계 인자 해석을 통해 스마트 스킨 설계 자료를 확보하였다. 하니컴 심재의 전단탄성계수가 굽힘 변형과 전단 변형이 동시에 발생하는 스마트 스킨의 좌굴 하중에 큰 영향을 미치는 것을 화인하였다.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.799-806
• /
• 2004

This paper presents a scheme for finding an optimal combination of design parameters affecting on the handling performance of a large truck using design of experiments. The average of the sum of peak-to-peak roll angles at the first and second part of the double lane is used as an objective function for design of experiments. Six design parameters are selected from all possible parameters affecting on the handling performance. The table of orthogonal arrays is made by 27 times simulations. A computational model of a large truck is developed by MSC/NASTRAN and MSC/ADAMS, and verified the reliability of it with the results of vehicle tests performed in a double lane change course. It is used for the simulations. Analyses of variance and factor effect of the table of orthogonal arrays are performed. This paper proposes an optimal combination of those six design parameters for improving the handling performance of the large truck.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.197-204
• /
• 2003

This paper develops a computer model for estimating the handling of a cabover type large-sized truck. The truck is composed of front and rear suspension systems, a frame, a cab, and ten tires. The computer model is developed using ADAMS. A shock absorber, a rubber bush, and a leaf spring aunt a lot on the dynamic characteristic of the vehicle. Their stiffness and damping coefficient are measured and used as input data of the computer model. Leaf springs in the front and rear suspension systems are modeled by dividing them three links and joining them with joints. To improve the reliability of the developed computer model, the frame is considered as a flexible body. Thus, the frame is modeled by finite elements using MSC/PATRAN. A mode analysis is performed with the frame model using MSC/NASTRAN in order to link the frame model to the computer model. To verify the reliability of the developed computer model, a double lane change test is performed with an actual vehicle. In the double lane change, lateral acceleration, yaw rate, and roll angle are measured. Those test results are compared with the simulation results.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.151-154
• /
• 2002

In this paper, the effect of the crack growth length on the plastic zone size at the crack tip and the crack growth lives of the DENT specimen under constant amplitude cyclic loading were studied. The plastic zone size was calculated by nonlinear static method in commercial finite element analysis program, MSC/NASTRAN and the crack growth lives were also calculated by using compliance function considering geometric shape in MSC/FATIGUE. The calculated plastic zone size increased proportional to the crack length. And comparison of calculated plastic zone size and crack growth lives with the experimental results shows a good agreement.

• 연구논문집
• /
• 통권27호
• /
• pp.57-73
• /
• 1997

The bogie between the track and the railway vehicle body, is one of the most important component in railroad vehicle. Its effects on the safety of both passengers and vehicle itself, and on the overall performance of the vehicle such as riding quality, noise and vibration are critical. The bogie is mainly consisted of the bogie frame, suspensions, wheels and axles, braking system, and transmission system. The complex shapes of the bogie frame and the complicate loading condition (both static and dynamic) induced in real operation make it difficult to design the bogie frame fulfilling all the requirements. The complicated loads applied to the bogie frame are i) static load due to the weight of the vehicle and passengers, ii) quasi-static load due to the rolling in curves iii) dynamic load due to the relative motion between the track, bogie, and vehicle body. In designing the real bogie frame, fatigue analysis based on the above complicated loading conditions is a must. In this study, stress analysis of the bogie frame has been performed for the various loading conditions according to the UIC Code 6 15-4. Magnitudes of the stress amplitude and mean stress were estimated based on the stress analysis results to simulate the operating loads encountered in service. Fatigue strength of the bogie frame was evaluated by using the constant life diagram of the material. 3-D surface modelling, finite element meshing, and finite element analysis were performed by Pro-Engineer, MSC/PATRAN, and MSC/NASTRAN, respectively.