• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.119-123
• /
• 2012

The detection properties of gamma-irradiated (0~10 kGy) dried seaweed, dried shrimp, and seasoned dried filefish were investigated by photo-stimulated luminescence (PSL) and electron spin resonance (ESR). PSL could be used as a detection method on irradiated dried seaweed and dried shrimp as they showed photon counts greater than 5,000 counts/60 s (positive) in the irradiated samples with doses above l kGy. However, PSL could not be applied to detect irradiated seasoned dried filefish, because gamma-irradiated sample at 10 kGy even yielded photon counts less than 700 counts/60 s (negative). The ESR spectroscopy for only dried shrimp revealed specific signals derived from free radicals captured in the shell of shrimp. As a result, it is considered that PSL or ESR methods for detection of gamma-irradiated dried shrimp and only PSL can be used to detect gamma-irradiated seaweed. Furthermore, it is considered that hydrocarbon analysis of seasoned dried filefish containing fat by GC/MS and Thermo Luminance (TL) analysis of dried seaweed should be studied for detection of irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.620-624
• /
• 1992

The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.

• Nutrition Research and Practice
• /
• v.13 no.6
• /
• pp.521-528
• /
• 2019

BACKGROUND/OBJECTIVES: The aim of this study was to develop Korean food image detection and recognition model for use in mobile devices for accurate estimation of dietary intake. MATERIALS/METHODS: We collected food images by taking pictures or by searching web images and built an image dataset for use in training a complex recognition model for Korean food. Augmentation techniques were performed in order to increase the dataset size. The dataset for training contained more than 92,000 images categorized into 23 groups of Korean food. All images were down-sampled to a fixed resolution of $150{\times}150$ and then randomly divided into training and testing groups at a ratio of 3:1, resulting in 69,000 training images and 23,000 test images. We used a Deep Convolutional Neural Network (DCNN) for the complex recognition model and compared the results with those of other networks: AlexNet, GoogLeNet, Very Deep Convolutional Neural Network, VGG and ResNet, for large-scale image recognition. RESULTS: Our complex food recognition model, K-foodNet, had higher test accuracy (91.3%) and faster recognition time (0.4 ms) than those of the other networks. CONCLUSION: The results showed that K-foodNet achieved better performance in detecting and recognizing Korean food compared to other state-of-the-art models.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.290-296
• /
• 2021

Objective: The purpose of this research is to examine the effects of three types of different running shoes with different properties on impact variables (PVRGF and VLR) and the lower extremity joint's dynamic stability variables (LyEs of DPA, IEA, FEA, DPAV, IEAV, and FEAV) during running. Method: The participants in this research were 12 males (Age: 22.0 ± 3.3 years, Height: 177.2 ± 4.1 cm, Weight: 74.3 ± 9.6 kg). One type of N company's running shoes and two types (FA, FB) of F company's running shoes were used. As for the properties of the running shoes, thickness (mm), dwell time (ms), peak acceleration (m/s2), and energy return (%) were measured. The motions running at 3.5 m/s on a treadmill (Instrumented treadmill, Bertec, USA) wearing each type of running shoes were analyzed. Results: Although the VLR of the thick running shoes (FB) was smaller than that of the other running shoes (N, FA), the LyEs of PVGRF and DPA were larger (p<.05). Even though the running shoes' dwell time (i.e., impact absorption time) and peak acceleration showed a positive correlation with the LyEs of DPAV, IEAV, and FEAV, the energy return showed a negative correlation (p<.05). Conclusion: Our results indicated that the running shoes with excellent impact absorption function are predicted to be suitable for running beginners who need to reduce the burden of the lower extremity joint during running. The running shoes with excellent energy return are expected to be suitable for mid-and long-distance running elite athletes or marathoners to whom stability and consistency are essential during running.

• The Journal of Internal Korean Medicine
• /
• v.42 no.4
• /
• pp.628-644
• /
• 2021

Objectives: This study analyzed, through network analysis and data mining analysis, the relationship between herbs used in osteoporosis prescriptions, diversified the analysis of osteoporosis-related prescriptions, and analyzed the combination of herbs used in osteoporosis-related prescriptions. Methods: The prescriptions used in osteoporosis treatment and experiments were established by conducting a full survey of the papers published by the OASIS site. A database for osteoporosis-related prescriptions was established, herbs were extracted, and the frequency of frequent herbs and prescriptions were investigated using Excel (MS offices ver. 2013). Using the freeware R version 4.0.3 (2020-10-10), igraph, and arules package, network analysis was performed in the first second of prescription composition. Results: Among the osteoporosis-related prescriptions, the most studied prescriptions are as follows.: Yukmijihwang-tang (六味地黃湯) and Samul-tang (四物湯). In the osteoporosis prescription network, herbs with connection centrality, proximity centrality, mediation centrality, and eigenvector centrality appeared in the order of Rehmanniae Radix Preparata, Angelicae Gigantis Radix, Poria Sclerotium, Paeoniae Radix, and Glycyrrhizae Radix et Rhizoma. After extracting the herbal combination network, including the corresponding herbs, and clustering it, it can be divided into drugs of the Yukmijihwang-tang (六味地黃湯) series and the Samul-tang (四物湯). Conclusions: This study could assist researchers in diversifyingy formula analysis in future studies. Moreover, the herbal combination used in osteoporosis prescriptions could be used to search for osteoporosis prescriptions in other databases or to create a new prescription.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.3
• /
• pp.141-155
• /
• 2021

Purpose: To develop a 3D magnetic resonance fingerprinting (MRF) method for application in high resolution knee cartilage PD, T₁, T₂ mapping. Materials and Methods: A novel 3D acquisition trajectory with golden-angle rotating radial in k_xy direction and interleaved echo planar imaging (EPI) acquisition in the k_z direction was implemented in the MRF framework. A centric order was applied to the interleaved EPI acquisition to reduce Nyquist ghosting artifact due to field inhomogeneity. For the reconstruction, singular value decomposition (SVD) compression method was used to accelerate reconstruction time and conjugate gradient sensitivity-encoding (CG-SENSE) was performed to overcome low SNR of the high resolution data. Phantom experiments were performed to verify the proposed method. In vivo experiments were performed on 6 healthy volunteers and 2 early osteoarthritis (OA) patients. Results: In the phantom experiments, the T₁ and T₂ values of the proposed method were in good agreement with the spin-echo references. The results from the in vivo scans showed high quality proton density (PD), T₁, T₂ map with EPI echo train length (N_ETL = 4), acceleration factor in through plane (R_z = 5), and number of radial spokes (N_spk = 4). In patients, high T₂ values (50-60 ms) were seen in all transverse, sagittal, and coronal views and the damaged cartilage regions were in agreement with the hyper-intensity regions shown on conventional turbo spin-echo (TSE) images. Conclusion: The proposed 3D MRF method can acquire high resolution (0.5 mm³) quantitative maps in practical scan time (~ 7 min and 10 sec) with full coverage of the knee (FOV: 160 × 160 × 120 mm³).

• Journal of Plant Biotechnology
• /
• v.48 no.4
• /
• pp.255-263
• /
• 2021

Paederia foetida L. is an important medicinal plant that has been used for the treatment of various gastrointestinal related ailments by different tribal communities in India. This plant is also known for its use as a food. Due to overexploitation, P. foetida has been classified as a vulnerable plant in some states of India. The propagation of P. foetida by conventional methods is easy but very slow. Synthetic seed technology offers incredible potential for in vitro propagation of threatened and commercially valuable plants, and can also facilitate the storage and exchange of axenic plant material between laboratories. However, synthetic seed production for P. foetida has not yet been reported. Thus, to the best of our knowledge, the present study is the first attempt to produce synthetic seeds of P. foetida by calcium alginate encapsulation of in vitro regenerated axenic nodal segments. Sodium alginate (3%) and CaCl₂ (100 mM) were found to be the optimal materials for the preparation of ideal synthetic seeds, both in terms of morphology and germination ability. The synthetic seeds showed the best germination (formation of both shoot as well as root; 83.3%) on ½ MS medium augmented with 0.5 mg/L indole-3-acetic acid. The plantlets obtained from these synthetic seeds could be successfully acclimatized under field conditions. We also studied the storage of these synthetic seeds at low temperature and their subsequent sprouting/germination. The seeds showed a germination rate of 63.3% even after 21 days of storage at 4 ℃; thus, they could be useful for transfer and exchange of P. foetida germplasm.

• Journal of Plant Biotechnology
• /
• v.48 no.4
• /
• pp.246-254
• /
• 2021

Environmental stresses are estimated to have reduced global crop yields of wheat by 5.5%. However, traditional approaches for the transfer of resistance to these stresses in wheat plants have yielded limited results. In this regard, genetic transformation has undoubtedly opened up new avenues to overcome crop losses due to various abiotic stresses. Particle bombardment has been successfully employed for obtaining transgenic wheat. However, most of these procedures employ immature embryos, which are not available throughout the year. Therefore, the present investigation utilized mature seeds as the starting material and used the calli raised from three Moroccan durum wheat varieties as the target tissue for genetic transformation by the biolistic approach. The pANIC-5E plasmid containing the SINA gene for drought and salinity tolerance was used for genetic transformation. To enhance the regeneration capacity and transformation efficiency of the tested genotypes, the study compared the effect of copper supplementation in the induction medium (up to 5 μM) with the standard MS medium. The results show that the genotypes displayed different sensitivities to CuSO₄, indicating that the transformation efficiency was highly genotype-dependent. The integration of transgenes in the T₀ transformants was demonstrated by polymerase chain reaction (PCR) analysis of the obtained resistant plantlets with primers specific to the SINA gene. Among the three genotypes studied, 'Isly' showed the highest efficiency of 9.75%, followed by 'Amria' with 1.25% and 'Chaoui' with 1%.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.2
• /
• pp.311-320
• /
• 2019

Fusobacterium nucleatum is a morbific agent in periodontitis and halitosis. Egg yolk antibody (IgY) was obtained from egg yolks from chickens stimulated with F. nucleatum. This study was to assess the effectiveness of IgY on periodontitis and halitosis caused by F. nucleatum in vitro and in vivo. The growth of F. nucleatum was inhibited (p <0.05) by different concentrations of IgY in vitro and the results of a Halimeter show volatile sulfur compounds (VSCs) were reduced to $904{\pm}57ppb$ at a concentration 40 mg/ml of IgY. The changes of fatty acids of F. nucleatum were determined using GC-MS. The scores for odor index of rat saliva were decreased. The major constituent of volatile organic compounds (VOCs) including short-chain acids decreased 46.2% in 10 mg/ml IgY, ammonia decreased 70% in 40 mg/ml IgY, while aldehydes and olefine ketones were almost unchanged. The ELISA assay revealed that IL-6 and TNF-${\alpha}$ were decreased after 4 weeks' IgY treatment. Morphometric (X-ray) and histological analyses (HE) showed that IgY reduced alveolar bone loss and collagen fibers became orderly in rat models. As a result, IgY may have the potential to treat periodontitis and halitosis.

• Journal of Veterinary Clinics
• /
• v.36 no.3
• /
• pp.159-165
• /
• 2019

Pimobendan is an inodilator used to treat canine heart failure, and pentoxifylline is reported to be beneficial for microcirculation and heart disease. The purpose of this study was to evaluate the pharmacokinetic and pharmacodynamic profiles of a novel pimobendan-pentoxifylline liquid mixture after oral administration to dogs. Eight healthy Beagle dogs were included in the study. The dogs were divided into the control group (orally administered water; n = 4) and experimental group (orally administered pimobendan-pentoxifylline liquid mixture [pimobendan 0.25 mg/kg, pentoxifylline 15 mg/kg]; n = 4). Plasma samples were obtained and echocardiographic indices were measured for 24 hours after administration. The concentrations of pimobendan and pentoxifylline were quantified by using a liquid chromatography-mass spectrometer (LC-MS). The elimination half-life ($T_{1/2}$) was $32.96{\pm}9.80mins$ for pimobendan and $29.49{\pm}6.67mins$ for pentoxifylline. The time to reach maximum concentration ($T_{max}$) were $52.50{\pm}31.22mins$ for pimobendan and $41.25{\pm}18.87mins$ for pentoxifylline. The maximum blood concentration ($C_{max}$) was $96.92{\pm}75.64ng/mL$ for pimobendan and $7074.07{\pm}3261.1ng/mL$ for pentoxifylline. Of the echocardiographic indices, fractional shortening (FS) and left ventricular internal diameter at end systole (LVIDs) were significantly altered at 1-3 hours after the administration of pimobendan-pentoxifylline liquid mixture. The pimobendan-pentoxifylline liquid mixture was well tolerated by the dogs, with no adverse effects observed during the study.