• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.265-270
• /
• 2014

Hearing-impaired people have difficulty in hearing, so it is also hard for them to learn letters that represent sound and text that conveys complex and abstract concepts. Therefore it has been natural choice for the hearing-impaired people to use sign language for communication, which employes facial expression, and hands and body motion. However, the major communication methods in daily life are text and speech, which are big obstacles for the hearing-impaired people to access information, to learn and make intellectual activities, and to get jobs. As delivering information via internet become common the hearing-impaired people are experiencing more difficulty in accessing information since internet represents information mostly in text forms. This intensifies unbalance of information accessibility. This paper reports web-based text-to-sign language translating system that helps web designer to use sign language in web page design. Since the system is web-based, if web designers are equipped with common computing environment for internet browsing, they can use the system. The web-based text-to-sign language system takes the format of bulletin board as user interface. When web designers write paragraphs and post them through the bulletin board to the translating server, the server translates the incoming text to sign language, animates with 3D avatar and records the animation in a MP4 file. The file addresses are fetched by the bulletin board and it enables web designers embed the translated sign language file into their web pages by using HTML5 or Javascript. Also we analyzed text used by web pages of public services, then figured out new words to the translating system, and added to improve translation. This addition is expected to encourage wide and easy acceptance of web pages for hearing-impaired people to public services.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1985-1999
• /
• 2021

The purpose of this study is to apply urban heat island reduction techniques(green roof, cool roof, and cool pavements using heat insulation paint or blocks) recommended by the Environmental Protection Agency (EPA) to our study area and determine their actual effects through a comparative analysis between land cover objects. To this end, the area of Mugye-ri, Jangyu-myeon, Gimhae, Gyeongsangnam-do was selected as a study area, and measurements were taken using a drone DJI Matrice 300 RTK, which was equipped with a thermal infrared sensor FLIR Vue Pro R and a visible spectrum sensor H20T 1/2.3" CMOS, 12 MP. A total of nine heat maps, land cover objects (711) as a control group, and heat island reduction technique-applied land covering objects (180) were extracted every 1 hour and 30 minutes from 7:15 am to 7:15 pm on July 27. After calculating the effect values for each of the 180 objects extracted, the effects of each technique were integrated. Through the analysis based on daytime hours, the effect of reducing heat islands was found to be 4.71℃ for cool roof; 3.40℃ for green roof; and 0.43℃ and -0.85℃ for cool pavements using heat insulation paint and blocks, respectively. Comparing the effect by time period, it was found that the heat island reduction effect of the techniques was highest at 13:00, which is near the culmination hour, on the imaging date. Between 13:00 and 14:30, the efficiency of temperature reduction changed, with -8.19℃ for cool roof, -5.56℃ for green roof, and -1.78℃ and -1.57℃ for cool pavements using heat insulation paint and blocks, respectively. This study was a case study that verified the effects of urban heat island reduction techniques through the use of high-resolution images taken with drones. In the future, it is considered that it will be possible to present case studies that directly utilize micro-satellites with high-precision spatial resolution.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.15-22
• /
• 2019

The purpose of this study is to develop a strain sensor based on a nanoweb by applying electrical conductivity to a polyurethane nanoweb through the use of Graphene. For this purpose, 1% Graphene ink was pour-coated on a polyurethane nanoweb and post-treated with PDMS (Polydimethylsiloxane) to complete a wearable strain sensor. The surface characteristics of the specimens were evaluated using a field emission scanning electron microscope (FE-SEM) to check whether the conductive material was well coated on the surface of the specimen. Electrical properties of the specimens were measured by using a multimeter to measure the linear resistance of the specimen and comparing how the line resistance changes when 5% and 10% of the specimens are tensioned, respectively. In order to evaluate the performance of the specimen, the gauge factor was obtained. The evaluation of the clothing was performed by attaching the completed strain sensor to the dummy and measuring the respiration signal according to the tension using MP150 (Biopac system Inc., USA) and Acqknowledge (ver. 4.2, Biopac system Inc., U.S.A.). As a result of the evaluation of the surface characteristics, it was confirmed that all the conductive nanoweb specimen were uniformly coated with the Graphen ink. As a result of measuring the resistance value according to the tensile strength, the specimen G, which was treated with just graphene had the lowest resistance value, the specimen G-H had the highest resistance value, and the change of the line resistance value of the specimen G and the specimen G-H is increased to 5% It is found that it increases steadily. Unlike the resistance value results, specimen G showed a higher gauge rate than specimen G-H. As a result of evaluation of the actual clothes, the strain sensor made using the specimen G-H measured the stable peak value and obtained a signal of good quality. Therefore, we confirmed that the polyurethane nanoweb treated with Graphene ink plays a role as a breathing sensor.

• Journal of Ginseng Research
• /
• v.27 no.1
• /
• pp.37-42
• /
• 2003

For study about introduce of gene connected with disease and transformation system of gingseng, chitinase gene cloned from soybene and disease resistant gene were carried out for expression and transformation of plant using Agrobacterium. The disease resistance gene(DR-49), 35S-35S-AMV, has been constructed. The disease resistance gene and chitinase gene were introduced into the binary vector pRD 400, which were mobilized into Agrobacterium tumefaciens faciens strain MP 90 and LBA 4404 harboring disarmed Ti-plasmid. As a result of induce transformants using ginseng embryo and petiole, multi shoots were formed on MS medium supplemented 1 mg/ι 2,4-D and 0.5 mg/ι kinetin. Also transformation by cotyledonwas effective on MS medium supplemented 1 mg/ι 2,4-D and 0.5 mg/ι kinetin, transformation percent of disease resistant gene and chitinase gene were showed 18%, 14% respectively. As transformed tissue is under pre-embryoid condition, normal shoot is required through the process of matured embryo.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.153-163
• /
• 1989

The activity changes and biochemical properties of ${\beta}$-gal in tomato fruits during ripening were investigated. The total activity was increased during ripening and three isoenzymes (${\beta}$-gal I, II and III) were purified through DEAE Sephadex A-50 and Sephadex G-100 column chromatography. The activities of ${\beta}$gal isoenzymes (${\beta}$-gal I, II and III) during ripening were 69.8, 31.8 and 170.0 units in mature green phase, while those were 48.7, 88.4 and 136.8 units in Red phase, respectively. As the ripening proceeded the activities of ${\beta}$-gal I and III were some what decreased but the activity of ${\beta}$-gal II was incresed more than 2.8 fold. The optimum pH of ${\beta}$-gal I, II and III were 3.9, 4.2 and 3.9 and the optimum temperature of those were $60^{\circ}C$, $56^{\circ}C$ and $60^{\circ}C$, respectively. All isoenzymes were stable at pH 3.6~6.0 and lost their activity about 50% when it heated at $55^{\circ}C$ for 5 minute. $Mg^{{+}{+}}$-activated the three isoenzymes but $Ca^{{+}{+}}$ and SDS inhibited about 30~40%. $Hg^{{+}{+}}$ inhibited completely. The km value of ${\beta}$-gal I, II and III was 0.36mM, 0.63mM and 0.45mM, reaction rate was rapidly increased until the concentration of substrate was $6.0{\times}10^{-5}M$.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.1
• /
• pp.47-52
• /
• 2009

The aim of this study was to evaluate the effect of yeast(Saccharomyces exiguus SJPAF1, referred to as SA) addition on odor emission and contaminants reduction in piggery sluny. Four different rates of yeast addition were compared: no addition(SA0), 0.7L(SA0.7), 1.0L(SA1.0), and 1.5L(SA1.5) to one tone of piggery slurry. Odor emission tended to decrease with increasing the yeast application with concurrent effects of changes in temperature on outside of reactors. Particularly, reduction in ammonia emission was proportional to the yeast application rate; it reduced from 161.1 ppm in SA0 to 47.1 ppm in SA1.5 after 6 days of treatment Decomposition of piggery shiny by yeast increased to 13.8% more in SA1.5, and total amounts of piggery slurry decreased to 12.5% in SA1.5. Total coliforms were detected below 30MPN $ml^{-1}$ in SA1.5, while $8.3{\times}10^3$ MPN $ml^{-1}$ of Total coliforms were found in SA0. However, the effect of yeast addition in piggery slurry seemed to have no influence on the removal efficiency of contaminants such as BOD, COD, $NO_3^{-}-N$, $NH_4^{+}-N$, $PO_4^{-}P$. Consequently, the yeast(Saccharomyces exiguus SJPAF1) addition of 1.5% in the piggery sluny seems to have potential applicability for improving agent of pig-farm environment.

• Journal of Environmental Health Sciences
• /
• v.43 no.6
• /
• pp.509-515
• /
• 2017

Objectives: The purpose of this study was to assess the indoor levels of $PM_{10}$, VOCs and aldehydes in nail shop and hair salon. Methods: The field survey was conducted for 52 hair salons 52 nail shops, and 26 shop-in-shops in Seoul and Daegu city. The field technicians investigated characteristics of each shop including operating time, indoor volume, ventilation and so on. Indoor concentrations of $PM_{10}$, VOCs and aldehydes, indoor temperature and humidity were measured in 12 hair salons, 12 nail shops and 6 shop-in shops. MP Surveryor II (Graywolf, USA) was used to measure $CO_2$ concentration, temperature and humidity for 8 hours. $PM_{10}$ concentrations were measured by minivolume air sampler with Teflon quartz filter ($0.2{\mu}m$ pore size, ${\varphi}$ 47 mm, Graseby-Anderson TEF-DISKTM) for 6 hours. VOCs passive sampler (OVM 3500) was used to collect VOCs for 8 hours and analyzed by GC/MSD. Results: The $CO_2$ concentrations were $759.4{\pm}58.2$ ppm in nail shops, $731.0{\pm}72.5$ ppm in hair salons, and $656.4{\pm}31.2$ ppm in shop-in-shops. The $PM_{10}$ concentrations were $27.5{\pm}14.2{\mu}g/m^3$ in nail shops, $33.1{\pm}6.3{\mu}g/m^3$ in hair salons, and $39.0{\pm}26.9{\mu}g/m^3$ in shop-in-shops. TVOCs concentrations were $3085.4{\pm}1667.8{\mu}g/m^3$ in nail shops, $2131.1{\pm}617.3{\mu}g/m^3$ in hair salons, and $1550.3{\pm}529.0{\mu}g/m^3$ in shop-in-shops. TVOCs concentrations in nail shops were significantly higher than those in hair salons and shop-in-shops (p=0.002). Formaldehyde concentrations were $60.8{\pm}36.6{\mu}g/m^3$ in nail shops, $89.1{\pm}55.4{\mu}g/m^3$ in hair salons, and $45.1{\pm}22.5{\mu}g/m^3$ in shop-in-shops. Conclusion: TVOCs concentrations in nail shop were the highest among others. TVOC concentrations in all stores exceeded indoor air quality stand of indoor air quality control in public-use facilities, etc act.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.567-574
• /
• 2016

This survey was conducted in 2015, following up on theed tthe occurrence of Turnip mosaic virus (TuMV) nationwide in radish and Chinese cabbage fields of 28 cities in South Korea. A total of 152 samples of Raphanus sativus and 29 samples of Brassica rapa, showing virus-like symptoms, were collected. Among these, 107 B. rapa samples and 9 B. rapa samples were positive for TuMV when analyzed by RT-PCR. The TuMV strains found in the two crops showed 99% homology in nucleotide and amino acid sequences of coat protein to each other. Furthermore, their sequences showed 99% homology to the sequences of TuMV isolates R007 (GenBank: KU140420) and R041 (GenBank: KU140421) that were collected in 2014. These results suggested TuMV isolated from radish and cabbage in 2015 were the same strain as the isolates R007 and R041 collected in 2014. A screening test was conducted using these two isolates to select TuMV-resistant B. rapa lines out of 167 B. rapa breeding lines.and identified eight lines resistant to R007 (Kenshin, 279002, 279012, 279064, 279081, MP, C-21, HKC-004) and nine lines resistant to R041 (C-26, HKC-005, 11Su-4, 11Su-5, 11Su-7, 11Su-8, Tian Jin Lv Qing Ma Ye, CNU_141193, Jing Lv 60). Our prior data indicated 4.24% difference in sequences between the two isolates and these can serve as potential tools to develop B. rapa markers to screen for resistance against TuMV strainsin breeding populations.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.4
• /
• pp.285-290
• /
• 2007

This study was conducted to introduce phosphinothricin acetyl transferase (PAT) gene, resistant to basta which was non-selective herbicide, into balloon flower (Platycodon grandiflorum A. De. candolle). Seeds were germinated on MS medium, and 10-day-old immature cotyledon explants and 30-day-old leaf explants were cocultured with Agrobacterium tumefaciens strain MP 90 (pBinSyn) on 1/10 MS medium for 48 hours in the dark at $25^{\circ}C$. The cultures were transferred for selection of kanamycin-resistant shoots to the MS medium supplemented with 0.2 $mg/{\ell}$ NAA, 1.0 $mg/{\ell}$ BA, 3% sucrose, 100 $mg/{\ell}$ kanamycin, 500 $mg/{\ell}$ carbenicillin. Shoots were obtained from 10-day-old immature cotyledon explants after 4 weeks of culture. The shoots were subcultured twice every 4 weeks on the same medium for growth of transgenic shoots. Successful transformation was confirmed by histochemical GUS assay, PCR analysis, RT-PCR analysis, 10 $mg/{\ell}$ phosphinothricin treatment and 0.3% basta spray. The basta-resistant transgenic plants flowered normally.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.138-150
• /
• 1997

The late Quaternary stratigraphy of the tidal deposits in the Hampyung Bay, southwestern coast of Korea comprises 1) Unit III (nonmarine fluvial coarse-grained sediments), 2) Unit II (late Pleistocene tidal deposits), and 3) Unit I (late Holocene fine-grained tidal deposits) in ascending order. The basements of the Hampyung Bay is composed of granitic rocks and basic dyke rocks. These three units are of unconformally bounded sedimentary sequences. The sequence boundary between Unit I and Unit II, in particular, seems to be significant suggesting erosional surface and exposed to the air under the cold climate during the LGM. The uppermost stratigraphic sequence (Unit I) is a common tidal deposit formed under the transgression to highstand sea-level during the middle to late Holocene.