• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.105-110
• /
• 2009

현재 NASA에서 제공되는 MODIS 지표반사율자료(MOD09)는 MODIS영상을 이용한 각종 주제자료들의 중요한 입력 자료로 사용되고 있으며, MODIS 지표반사율 자료에 대한 객관적인 검증연구가 필요한 실정이다. 따라서 본 연구에서는 MOD09의 검증관련 초기 연구로서, 남한에 분포하는 불변성 타겟(invariant target)을 대상으로 2006년 일별 250m MODIS 지표반사율자료(MOD09GQK)자료의 객관적 검증을 시도하였다. 우선, MOD09 QA(Quality Assurance)자료를 이용하여 구름의 영향을 받은 화소를 제거한 후, 수치지도와 토지피복도를 이용하여 정의한 불변성 타겟에 해당되는 MOD09영상의 화소값을 추출하였다. 이와 같이 추출된 시계열 MOD09GHK영상의 화소값에 1차 회귀분석을 적용하여 이상 반사율 값을 탐지하고, 그 원인을 분석하였다. 검증 결과 나지지역에 대해서 0.0186의 RMSE값이 나타났으며, 인공물의 경우 0.2891의 RMSE값을 보였다. 발생된 이상 화소를 살펴보면, 구름, 그림자, 눈에 영향에 의해 발생한 것도 있으며, 원인을 알 수 없는 이상 화소들도 분포하였다. 향후 연구에서는 한반도 전역의 MODIS 시계열 반사율영상을 대상으로 MODIS 대기보정알고리즘과 입력인자의 적합성을 판단하기 위한 연구를 진행할 예정이다.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.254-259
• /
• 2009

In this study, Simplified Method for the Atmospheric Correction (SMAC) radiative transfer model (RTM) used to retrieve surface reflectance from MODIS Top Of Atmosphere (TOA) reflectance (MOD02). SMAC code provides coefficients which were previously yielded by Second Simulation of the Satellite Signal in the Solar Spectrum (6S) for each satellite sensor. We conducted error analysis of SMAC RTM using MOD02 over comparison with MODIS surface reflectance (MOD09) which was provided from 6S. It showed that low accuracy values such as, $R^2$ : 0.6196, Root Means Square Error (RMSE) : 0.00031, bias : - 0.0859. Thus sensitivity analysis of input parameters and coefficients was conducted to searching error sources. Coefficients about $\tau_p$ (average AOD) are more influence than any other coefficients of $\tau_{a550}$ (Aerosol Optical Depth at 550nm) from sensitivity test. Calibrated coefficients of $\tau_p$ from regression analysis were used to surface reflectance which showed that improve accuracy of surface reflectance ($R^2$ : 0.827, RMSE : 0.00672, bias : - 0.000762).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.172-183
• /
• 2012

In 2011, floods were at the worst stage of devastation in Chao Phraya river basin of Thailand. The purpose of this study is to trace the flood inundation area around Chao Phraya river basin by using Terra MODIS image because it has the ability of spatiotemporal dynamics. The MODIS indices, which included the enhanced vegetation index(EVI), land surface water index(LSWI), and the difference in the values of EVI and LSWI(DVEL), were extracted from MODIS product MOD09 8-day composite datasets with a spatial resolution of 500m from Jul. 29, 2011 to Jan. 09, 2012. We found that combined application of EVI, LSWI, and DVEL was suitable for monitoring flood inundation. For the extracted flood inundation area and water-related area. The result can be used to acquire the flood inundation data scattered and demonstrate the potential for the use of MODIS data for temporal and spatial detection of flood effects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.251-251
• /
• 2016

인공위성을 이용한 가뭄연구에는 전지구적으로 운용되는 GPM (Global Precipitation Measurement) 위성, AQUA/TERRA 위성의 MODIS (MODerate resolution Imaging Spectroradiometer) 센서 등에서 수집된 관측 자료가 이용된다. 그러나 전지국적으로 관측된 위성 자료는 자료를 생산 제공하는 기관에 따라 자료의 파일포맷 (NetCDF, HDF5, GeoTIFF 등), 자료의 투영법 (projection) 등이 상이하다. 그러므로 가뭄연구에 다중위성자료를 활용하고자 하는 지리정보시스템(Geographic Information System: GIS)에 대한 전문지식이 부족한 연구자는 자료의 표준화 (파일포맷과 투영변환 등) 과정으로 인해 원활한 연구수행이 어렵다. MODIS 위성자료의 경우에는 일반적으로 많이 사용되는 횡단메르카토르 도법 (Transverse Mercator Projection: TM) 대신 시뉴소이드 도법 (sinusoidal projection)을 이용한다. 그래서 미국 지질조사국은 MODIS 자료의 재투영(reprojection)을 위한 전용 소프트웨어인 MRT (MODIS Reprojection Tool)를 배포하고 있다. 본 연구에서는 무료/오픈소스 소프트웨어를 활용하여 시뉴소이드 도법이 적용된 MODIS 자료의 수집, 재투영, 파일포맷 변환 등을 자동으로 처리하는 기법을 개발하여 가뭄활용에 이용하고자 하였으며, MODIS MOD09GA/MOD11A1 자료를 이용하여 효율성을 검증하였다.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.562-568
• /
• 2017

Background: The chemical characterization of metallic alloys and oxides is conventionally carried out by wet chemical analytical methods and/or instrumental methods. Instrumental neutron activation analysis (INAA) is capable of analyzing samples nondestructively. As a part of a chemical quality control exercise, Zircaloys 2 and 4, nimonic alloy, and zirconium oxide samples were analyzed by two INAA methods. The samples of alloys and oxides were also analyzed by inductively coupled plasma optical emission spectroscopy (ICP-OES) and direct current Arc OES methods, respectively, for quality assurance purposes. The samples are important in various fields including nuclear technology. Methods: Samples were neutron irradiated using nuclear reactors, and the radioactive assay was carried out using high-resolution gamma-ray spectrometry. Major to trace mass fractions were determined using both relative and internal monostandard (IM) NAA methods as well as OES methods. Results: In the case of alloys, compositional analyses as well as concentrations of some trace elements were determined, whereas in the case of zirconium oxides, six trace elements were determined. For method validation, British Chemical Standard (BCS)-certified reference material 310/1 (a nimonic alloy) was analyzed using both relative INAA and IM-NAA methods. Conclusion: The results showed that IM-NAA and relative INAA methods can be used for nondestructive chemical quality control of alloys and oxide samples.

• Restorative Dentistry and Endodontics
• /
• v.44 no.3
• /
• pp.33.1-33.12
• /
• 2019

Objectives: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. Materials and Methods: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with ${\alpha}=5%$. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. Results: MP showed the highest cusp (p = 0.027) deflection ($24.28{\pm}5.09{\mu}m/{\mu}m$), followed by FGP ($20.61{\pm}5.05{\mu}m/{\mu}m$), CR ($17.62{\pm}7.00{\mu}m/{\mu}m$), and GIC ($17.62{\pm}7.00{\mu}m/{\mu}m$). For load-bearing, CR ($38.89{\pm}3.24N$) showed the highest, followed by GIC ($37.51{\pm}6.69N$), FGP ($29.80{\pm}10.03N$), and MP ($18.41{\pm}4.15N$) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. Conclusions: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.256-256
• /
• 2012

2011년 태국 차오프라야 강 유역($160,813km^2$)에서 발생한 홍수에 의해 많은 피해가 발생했다. 태국 홍수는 2011년 7월 말부터 3개월간 내린 집중호우로 중부지방에 50년 만에 최악의 자연재해를 맞이하였다. 태국 북쪽 지역에서 난 강과 핑 강의 범람을 시작으로 태국 중앙 지역을 흐르는 차오프라야 강의 수위는 상류의 홍수가 하류로 내려옴에 따라 범람하여 수도 방콕까지 침수되었다. 본 연구에서는 홍수범람시 시공간적 침수상황이 파악 가능한 Terra MODIS (Moderate Resolution Imaging Spectroradiometer) 영상을 이용하여 태국 차오프라야 강 유역의 홍수에 의한 침수지역을 추정하고자 하였다. 2011년 7월 29일에서 2012년 1월 9일까지의 500 m 해상도인 MODIS product MOD09 (Surface Reflectance) 8일 합성 영상을 수집하고 식생지수 (EVI; Enhanced Vegetation Index), 지표수분지수 (LSWI; Land Surface Water Index))와 DVEL지수 (Difference Value between EVI and LSWI)를 이용하여 홍수범람 지역과 수역관련지역을 정보화 기법을 제시하였다. 본 연구의 결과는 홍수 범람지역의 자료를 정보화하고 그 결과를 정량적으로 제시하는 방법으로 활용될 수 있으며, MODIS 자료의 이용은 시공간적 하천 홍수범람지역 탐지의 가능성을 알 수 있었다.

• Korean Journal of Remote Sensing
• /
• v.25 no.6
• /
• pp.487-499
• /
• 2009

Atmospheric correction of satellite measurements is a major step to estimate accurate surface reflectance of solar spectrum channels. In this study, Simplified Method for the Atmospheric Correction (SMAC) radiative transfer model used to retrieve surface reflectance from MODIS (MODerate resolution Imaging Spectrometer) top of atmosphere (TOA) reflectance. It is fast and simple atmospheric correction method, so it uses for work site operation in various satellite. This study attempts a test of accuracy of SMAC through a sensitivity test to detected error sources and to improve accuracy of surface reflectance using SMAC. The results of SMAC as compared with MODIS surface reflectance (MOD09) was represented that low accuracy ($R^2\;=\;0.6196$, Root Means Square Error (RMSE) = 0.00031, bias = - 0.0859). Thus sensitivity analysis of input parameters and coefficients was conducted to searching error sources. Among the input parameters, Aerosol Optical Depth (AOD) is the most influence input parameter. In order to modify AOD term in SMAC code, Stepwise multiple regression was performed with testing and remove variable in three stages with independent variables of AOD at 550nm, solar zenith angle, viewing zenith angle. Surface reflectance estimation by using Newly proposed AOD term in the study showed that improve accuracy ($R^2\;=\;0.827$, RMSE = 0.00672, bias = - 0.000762).