• 제목/요약/키워드: MMF

검색결과 128건 처리시간 0.106초

주식시장과 채권시장간의 정보 이전효과 (Information Flow Effect Between the Stock Market and Bond Market)

  • 최차순
    • 융합정보논문지
    • /
    • 제10권3호
    • /
    • pp.67-75
    • /
    • 2020
  • 본 연구에서는 주식시장과 채권시장간의 정보 이전효과(information flow effect)를 살펴보기 위해 우리나라 KOSPI의 일일지수와 초단기 채권형 펀드(money market fund : MMF) 수익률 자료를 이용하여 분석하였다. 전체 분석대상 기간은 1997년 5월 2일부터 2019년 8월 30일까지 이다. 1997년 5월 2일부터 2008년 12월 30일 글로벌금융위기전 기간, 2008년 12월 30일부터 2019년 8월 30일까지 글로벌금융위기 후 기간과 전체기간으로 세분하여 실증분석을 하였다. 분석결과 비대칭적 변동성을 고려한 EGARCH 모형이 적합한 것으로 나타났다. 주식시장과 채권시장 간에는 가격이전효과와 변동성 이전효과가 양방향으로 존재하는 것으로 나타났으며, 가격이전효과는 두 시장 간에 글로벌금융위기전 기간이 후보다 더 크게 나타났다. 주식시장과 채권시장간의 정보에 대한 비대칭적 변동성이 두 시장에 존재하는 것으로 나타났다.

복합잡음 환경에서 Lagrange 보간법을 이용한 영상복원 알고리즘 (Image Restoration Algorithm using Lagrange Interpolation in Mixed Noise Environments)

  • 권세익;김남호
    • 한국정보통신학회논문지
    • /
    • 제19권2호
    • /
    • pp.455-462
    • /
    • 2015
  • 최근, 영상 매체는 멀티미디어의 핵심 서비스의 일환으로 인터넷, 컴퓨터, 디지털 카메라 등에 활용되고 있다. 디지털 가전과 개인 컴퓨터의 응용 소프트웨어의 발달로 디지털 영상은 쉽게 획득하고 처리할 수 있게 되었다. 그러나 디지털 영상을 획득, 처리, 전송하는 과정에서 여러 외부 원인에 의해 영상의 열화가 발생되며, 영상 열화의 주된 원인은 잡음에 의한 것으로 알려져 있다. 따라서 본 논문에서는 복합잡음을 제거하기 위해 잡음 판단 후, 임펄스 잡음은 Lagrange 보간법, 가우시안 잡음은 거리에 따른 공간가중치를 적용하여 처리하는 영상복원 필터 알고리즘을 제안하여 시뮬레이션하였다. 제안한 알고리즘은 임펄스 잡음(P=60%) 및 가우시안 잡음(${\sigma}=10$)에 훼손된 Girl 영상을 적용하여 처리한 결과, 기존의 A-TMF, AWMF, MMF에 비해 각각 8.77[dB], 8.83[dB], 10.02[dB] 개선되었다.

화소의 방향요소 및 가중치 마스크를 이용한 복합잡음 제거에 관한 연구 (A Study on Mixed Noise Removal using Pixel Direction Factors and Weighted Value Mask)

  • 권세익;김남호
    • 한국정보통신학회논문지
    • /
    • 제19권11호
    • /
    • pp.2717-2723
    • /
    • 2015
  • 최근, 디지털 영상처리는 방송, 통신, 컴퓨터 그래픽, 의학 분야 등에서 많이 응용되고 있다. 그러나 디지털 영상을 획득, 처리, 전송하는 과정에서 여러 외부 원인에 의해 영상의 열화가 발생된다. 따라서 본 논문에서는 복합잡음을 제거하기 위해 잡음 판단 후, salt and pepper 잡음은 네 방향의 화소 변화에 따른 가중치 필터로 처리하고, AWGN은 세개의 서로 다른 특성을 갖는 가중치 필터를 이용하여 처리하는 영상복원 필터 알고리즘을 제안하였다. 제안한 알고리즘은 salt and pepper 잡음(P=40)에 훼손된 Boat 영상을 적용하여 처리한 결과, 기존의 CWMF, AWMF, MMF에 비해 각각 1.33[dB], 1.41[dB], 0.51[dB] 개선었다.

Salt and Pepper 잡음 환경에서 히스토그램의 분포를 이용한 스위칭 필터 (Switching Filter using Distribution of Histogram in Salt and Pepper Noise Environments)

  • 백지현;박준모;김남호
    • 융합신호처리학회논문지
    • /
    • 제21권3호
    • /
    • pp.113-120
    • /
    • 2020
  • 최근 통신장비가 발달함에 따라 통신장비의 수요가 점차 늘어나고 있는 추세이다. 이에 따라 다양한 신호 처리가 연구되어져 왔다. 그 중 영상은 전처리 과정에서 잡음을 제거하지 않으면 오류의 전파라는 문제를 야기할 수 있기 때문에 잡음 제거가 필수불가결한 단계이다. Salt and Pepper 잡음의 경우 두 개의 극값을 가지는 대표적인 임펄스 잡음이다. 이러한 잡음을 제거하기 위해 다양한 연구가 진행되어 왔으며 CWMF, MF, MMF 등이 있다. 하지만 기존의 방법들은 고밀도 잡음 영역에서 다소 미흡한 모습을 보인다. 따라서 본 연구에서는 7×7 마스크 내부의 잡음개수에 따라 마스크의 크기를 다르게 하고, 영상의 히스토그램 분포를 이용하여 변형된 스위칭 필터로 필터링하는 알고리즘을 제안하였다. 제안한 알고리즘의 경우 고밀도 잡음 영역에서 효과적으로 잡음을 제거할 수 있으며, 객관적인 판단을 위해 PSNR을 이용하여 기존의 알고리즘들과 비교, 분석하였다.

히스토그램의 변곡점을 이용한 영상 신호의 잡음 제거 (Noise Removal of Image Signals using Inflection Points on Histogram)

  • 백지현;김남호
    • 한국정보통신학회논문지
    • /
    • 제24권11호
    • /
    • pp.1431-1436
    • /
    • 2020
  • 현대사회에서 CCTV, 블랙박스 등 다양한 영상기기로 편리함을 도모한다. 하지만 야간에서 촬영된 영상이나 영상 신호가 송, 수신되는 과정에서 잡음이 빈번하게 발생한다. 이러한 잡음을 제거하지 않으면 영상의 식별이 어렵다는 문제점이 발생한다. 따라서 영상 정보에서 영상의 잡음 제거는 필수불가결한 단계이다. 영상 잡음 중 대표적인 임펄스 잡음으로 Salt and Pepper 잡음이 있다. 잡음을 제거하기 위한 방법으로 선행연구가 진행되어져 왔고 그중 대표적인 방법으로 CWMF, MMF, A-TMF 등이 있다. 이러한 필터들은 공통적으로 저밀도 잡음 영역에서는 우수한 성능을 보이지만 고밀도 잡음 영역에서 잡음 제거 성능이 다소 부족하다는 단점이 있다. 따라서 제안한 알고리즘은 히스토그램 그래프의 변곡점을 이용하여 영역을 나누어 특이점을 제거하고, 히스토그램 분포를 이용한 가중치 필터를 제안한다. 객관적인 판단을 위해 PSNR을 이용하였다.

대전력 펄스발전기의 전자기력 해석 (Electromagnetic Analysis of High-power Compulsator)

  • 김성태;김영춘;문태선
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 B
    • /
    • pp.571-576
    • /
    • 2002
  • Electromagnetic analysis has been made for the design of 3 MJ Compulsator (Compensated Pulsed Alternator, CPA) that will be used as the power supply system of the electrothermal-chemical launcher system. using finite element method with ANSYS/Emag. From the analysis results, it was possible to decide the excitation MMF and the rotor/stator size to obtain the desired output current. And using electromagnetic forces from the analysis results. the stresses on the components of 3 MJ CPA could be analyzed. The detailed design based on the analysis results has been made and the fabrication of 3 MJ CPA is in progress. Before assembling components into 3 MJ CPA. an experiment is being made to check the correspondence between analysis results and measurements.

  • PDF

풍력발전 시스템용 새로운 형상의 축방향 자속형 스위치드 릴럭턴스 발전기 설계와 특성해석 (Design and characteristics analysis of novel transverse flux switched reluctance generator for wind turbine)

  • 강선일;오주환;권병일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.945-946
    • /
    • 2011
  • This paper presents design and characteristics analysis of transverse flux switched reluctance generator(TFSRG) for wind turbine. Dimension is calculated by using output equation and maximum magnetomotive force(mmf) equation per pole. Design specification within effective range of mechanical and electrical energy is suggested in order to perform the analysis. it is confirmed to torque, inductance and induced electromotive force(emf) for one phase through three dimension Finite Element Analysis. Then design specification can be verified by comparing with proposed specification.

  • PDF

평형운전에 기초한 단상 유도전동기의 실용적인 설계 (Practical Optimum Design of Single-phase Induction Motor Based on Balanced Operation Theory)

  • 백수황;김병택;권병일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.129-131
    • /
    • 2007
  • In this paper, we research improvement in efficiency of single-phase induction motor by adapting the condition of the balanced and quasi-balanced operation. we maintain turns of auxiliary winding of the motor and adjust resistance and reactance. In this condition, resistance value and copper loss are much gloater. Namely, this is the condition only for balancing MMF without consideration of copper loss of stator winding. To make more practical design, therefore, we will perform winding design which is based on balanced operation condition and applies copper loss minimum. The problem of deterioration of starting torque is completed by rotor bar shape design.

  • PDF

운전조건을 고려한 고속 영구자석형 동기전동기의 회전자 손실 해석 (Analysis on the Rotor Losses in High-Speed Permanent Magnet Synchronous Motor Considering the Operating Condition)

  • 장석명;최장영;조한욱
    • 전기학회논문지
    • /
    • 제56권1호
    • /
    • pp.48-56
    • /
    • 2007
  • In this paper, the rotor losses in high-speed permanent synchronous motor (PMSM) considering the operating condition are discussed. In order to maintain the mechanical integrity of a high-speed permanent magnet machine rotor intended for high-speed operation, the rotor assembly is often retained within a stainless steel or Carbon-Fiber/Epoxy sleeve. The sleeve is exposed to fields produced by the stator from either the slotting or the mmf harmonics that are not synchronous with rotor losses. On the basis of analytical field analysis, the rotor losses are analyzed. In particular, the no-load, rated with air-cooled, and forced water cooled conditions are considered. The results are validated extensively by comparison with non-linear finite element method (FEM).

토로이달 타입 플라이백 변압기의 누설 인덕턴스 해석 (Analysis of Leakage Inductance for Toroidal Type Flyback Transformer)

  • 박창수;강병극;신경구;정세교
    • 전력전자학회논문지
    • /
    • 제19권2호
    • /
    • pp.164-172
    • /
    • 2014
  • This paper presents an analysis of a leakage inductance for a toroidal type flyback transformer. The equation to calculate the leakage inductance is derived using the MMF diagram of the transformer. The analysis for the different types of the cores and winding structures is also provided using the FEM simulation. The winding structures minimizing the leakage inductance are finally discussed from the simulation and experimental results.