• 제목/요약/키워드: MLVSS

검색결과 73건 처리시간 0.02초

호기성 그래뉼 슬러지를 이용한 고농도 염분 함유 폐수의 생물학적 탈질 반응에 관한 연구 (Study on the Biological Denitrification Reaction of High-Salinity Wastewater using an Aerobic Granular Sludge (AGS))

  • 김현구;안대희
    • 한국환경과학회지
    • /
    • 제28권7호
    • /
    • pp.607-615
    • /
    • 2019
  • The purpose of this study is to biological treatment of high salinity wastewater using Aerobic Granular Sludge (AGS). In laboratory scale's experiments research was performed using a sequencing batch reactor, and evaluation of the denitrification reaction in accordance with the injection condition of salinity concentration, surface properties of microorganisms, and sludge precipitability was performed. The results showed that the salinity concentration increased up to 1.5%, and there was no significant difference in the nitrogen removal efficiency; however, it showed a tendency to decrease gradually from 2.0% onward. The specific denitrification rate (SDNR) was 0.052 - 0.134 mg $NO_3{^-}-N/mg$ MLVSS (mixed liquor volatile suspended solid)${\cdot}day$. The MLVSS/MLSS (mixed liquor suspended solid) ratio decreased to 76.2%, and sludge volume index ($SVI_{30}$) was finally lowered to 57 mL/g. Using an optical microscope, it was also observed that the initial size of the sludge was 0.2 mm, and finally it was formed to 0.8-1.0 mm. Therefore, salinity injection provides favorable conditions for the formation of an AGS, and it was possible to maintain stable granular sludge during long-term operation of the biological treatment system.

하수고도처리공법의 유입하수량 변화에 따른 슬러지 질산화/탈질속도 변화 (Change of Sludge Denitrification and Nitrification Rate according to the Operating Conditions in Advanced Wastewater Treatment Processes)

  • 이명은;오정익;박노석;고대곤;장해남;안용태
    • 멤브레인
    • /
    • 제28권1호
    • /
    • pp.31-36
    • /
    • 2018
  • 본 연구에서는 막결합생물반응조(MBR)공법을 비롯한 하수고도처리공법에서 유입하수량의 변화에 따른 슬러지 특성 변화를 파악하고자 하였다. 일 1.5톤을 처리하는 모형실험시설에서 설계유량 대비 유입하수량을 100, 70, 40, 10%로 변화시켜가며 이에 따른 비탈질속도(specific denitrification rate)와 비질산화속도(specific ammonia oxidation rate)의 변화를 측정하였다. 각 공법의 폭기조에서 채취한 슬러지의 비질산화속도는 유입하수량 100% 조건에서 세 가지 공법 모두 유사한 값($0.10gNH_4/gMLVSS/day$)으로 측정되었다. 유입하수량이 70%에서 40%로 감소함에 따라 비질산화속도가 크게 감소하는 경향을 나타냈다. 비탈질속도 역시 유입하수량이 감소함에 따라 최대 50%가량 감소하였다. 유입하수량이 감소할수록 비탈질속도와 비질산화속도가 감소하는 경향을 나타냈으나 원수의 총질소 농도와 반응조 내 미생물 농도를 고려하면 질소제거율에 영향을 미칠 정도는 아니었다. 따라서 유입하수량이 감소하는 경우에도 반응조 내 미생물 농도를 높게 유지할 수 있다면 안정적인 질소 제거가 가능할 것으로 판단된다.

부직포 여과막 생물반응조에서 알칼리도가 질산화 성능에 미치는 영향 (Effects of Alkalinity on the Nitrification Capability of Nonwoven Fabric Filter Bioreactor)

  • 배민수;안윤찬;장명배;조윤경;조광명
    • 대한환경공학회지
    • /
    • 제29권7호
    • /
    • pp.783-792
    • /
    • 2007
  • 부직포 여과막 생물반응조의 질산화 성능을 파악하기 위하여 주입폐수의 암모니아 농도를 $54\sim1,400$ mg/L 그리고 알칼리도를 $43\sim10,480$ mg/L로 변화시키면서 약 11시간의 체류시간에서 641일간 실험을 실시한 결과 반응조의 MLSS농도는 최초의 2,650 mg/L 에서 830 mg/L까지 감소하였다가 최고 8,340 mg/L까지 증가함으로써 반응조의 용적부하는 $0.120\sim3.130$ kg $NH_3-N/m^3-day$의 범위에서 변하였으나 F/M 비는 $0.067\sim0.414$ kg $NH_3-N/kg$ MLSS-day의 적은 변화를 보였다. 각 실험단계별 평균 질산화 효율이 $35.2\sim100%$로서, 최대 질산화율은 2.970 kg $N/m^3-day$ 또는 0.489 g N/g MLVSS-day로 나타났다. MLVSS의 질산화미생물 분율은 최초의 7.1%에서 최고 100%까지 변하였으나 부직포 여과막에 형성된 생물막의 경우에는 2.2%의 매우 낮은 값을 보였다. 미생물 성장계수는 0.117 g VSS/g N removed로 그리고 알칼리도 소모량은 평균 7.08 g alkalinity/g NOx-N produced로 측정되었다. 이러한 실험결과로 보아 부직포 여과막 생물반응조가 고농도 암모니아 폐수의 질산화에 적합한 공법으로 판단된다.

MLVSS에 따른 Jet Loop Reactor (JLR)에서 동력량과 공기량이 산소전달률에 미치는 영향 (Effects of Energy Input and Air Flow Rate on Oxygen Transfer Rate at Different MLVSS in a Jet Loop Reactor (JLR))

  • 윤애화;배종훈;임현우;전항배;허태영
    • 대한환경공학회지
    • /
    • 제33권12호
    • /
    • pp.868-873
    • /
    • 2011
  • 산소전달률은 음폐수, 축산폐수 그리고 매립지 침출수와 같은 고농도 폐수처리를 호기성 공정으로 처리할 시 그 성과를 결정하는 아주 중요한 요소이다. 본 논문에서는, Jet Loop Reactor (JLR)를 이용하여 공기유량과 동력량을 운전조건의 변수로 두고 미생물의 농도에 따른 산소소비율(Oxygen uptake rate, OUR)과 물질전달계수(Volumetric mass transfer coefficient, $K_L{\cdot}a$)를 측정하였으며, 산출된 $K_L{\cdot}a$ 값의 결과를 가지고 통계학적인 분석을 통하여 비선형 회귀 모형을 제안하여 보았다. 연구 결과, 미생물 농도를 높게 유지시켜야 하는 고농도 폐수를 적용할 경우에는, 동력량과 공기량은 산소전달률의 중요한 인자이며, 마지막으로 최종 비선형 회귀모형을 동력량과, 공기량 그리고 점성계수의 함수로 나타내보았다.

고정상 담체를 충진한 BER에서 HRT, 전류밀도 및 담체 충진율 변화가 질산성 질소 제거효율과 전류이용효율에 미치는 영향 (The effect of HRT, current density, and packing ratio on nitrate nitrogen removal efficiency and current efficiency in BRM-BER)

  • 황규대;이상근;성해창
    • 상하수도학회지
    • /
    • 제24권4호
    • /
    • pp.433-442
    • /
    • 2010
  • BER at different packing ratios of bio-ring media(BRM) was tested to investigate the effect of varying hydraulic retention time (HRT) and current density on the nitrate removal and current efficiency. In the preliminary batch mode experiment of BERs, current density was applied at 2.0 A/$m^2$, 4.0 A/$m^2$, 4.8 A/$m^2$, which correspond to the designation of reactor #1, #2, #3, respectively. The reactor #2 showed a highest nitrate removal rate of 162.0 mg $NO_3{^-}$-N/L/d, and the kinetics of nitrate removal rate was defined as the Zero order reaction. In the primary experiment of BERs, four BERs packed with BRM were operated in varying HRT and current, and the packing ratios of reactor #1, #2, #3 and #4 were 0%, 8%, 16%, 24%. respectively. This results of the experiments indicated that the nitrate removal rate and current efficiency were increased significantly cause of growing of autotrophic denitrification microorganisms on the surface of cathode and media by increasing of the current density and decreasing of HRT. However, The decreasing of nitrate removal rate and current efficiencies were observed in the condition of HRT of 5.25 hr and 4.8 A/$m^2$ of current density. With more increasing current density and decreasing of HRT, the hydrogen inhibition occurred at the surface of cathode. Moreover, nitrate removal rate by autotrophic denitrification microorganisms attached on the media surface was observed to be limited by no longer increasing dissolved hydrogen concentration of each reactor. In conclusion, the highest nitrate nitrogen removal and current efficiency could be achieved when the BER was operated at the conditions of 7 hr HRT, current density of 4.0 A/$m^2$, and 16% packing ratio. And it was found that the amount of nitrate removal by microorganisms attached on the surface of cathode and media (BRM) was 178.2 mg/L and 52.2 mg/L respectively. and the amount of nitrate removal per MLVSS was 0.435 g $NO_3{^-}$-N/g $MLVSS{\cdot}d$ and 0.336 $NO_3{^-}$-N/g $MLVSS{\cdot}d$.

전기분해 전처리 슬러지의 혐기성 소화 및 질산염 제거효율 평가 (Evaluation of Anaerobic Fermentation and Nitrate Removal Efficiency of Sewage Sludge Pre-treated with Electrolysis)

  • 김재형;전혜연;박대원
    • 에너지공학
    • /
    • 제23권1호
    • /
    • pp.33-39
    • /
    • 2014
  • 본 연구에서는 하수슬러지의 소화가스 생산 효율향상을 위해 전기분해 처리방법을 수행하고 이를 소화가스 생산과 탈질실험 효과를 확인하였다. 전기분해 처리시간, 전류밀도가 증가함에 따라 가용화율은 증가하였으며 전극간격 4 mm에서 전류밀도 10 mA/cm2로 60분 처리 시 가용화율은 9.02%를 보였다. 이를 이용하여 BMP실험을 진행한 결과 0.49 L CH4/g VS의 메탄생산량을 보이며 대조군대비 88.4% 증가함을 보였다. 같은 조건으로 처리된 하수슬러지를 이용하여 탈질실험을 진행한 결과 $19.2mg\;NO_3{^{-}}N/g\;MLVSS{\cdot}hr$의 탈질율을 보였으며 이를 통해 전기분해 처리된 하수슬러지는 생분해성이 증대됨에 따라 혐기성소화와 탈질공정에도 적용이 가능한 것으로 확인되었다.

Membrane Filter를 이용한 수산물 가공폐수처리에 대한 연구 (Research of Sea Food Wastewater Treatment using Membrane Filter)

  • 한동준
    • 환경위생공학
    • /
    • 제22권4호
    • /
    • pp.119-130
    • /
    • 2007
  • Sea food wastewater including high concentration of organics and nutrients is hard to treat stably by established traditional activated sludge process. This research is aimed to obey more and more of strengthened the law and to secure stable effluents by using advanced treatment process applied membrane filter in aeration tank for treatment of wastewater from marine products. It must maintain pH of influent over 6.0 to keep up stably biological sludge of advanced treatment process. At 38hr of HRT, removal rates of TBOD and TCOD were 99.9% and 99.4% respectively and TSS also removed with high efficiency. Most organics in the effluent was constituted with soluble type materials, it caused that membrane filter installed aeration tank should remove minute suspended particles. The reactor was operated well to get stable treatment results for operation period, in spite of high loading of organics like that $0.67{\sim}1.67\;kgTBOD/m^3/day$ of organics loading and $0.10{\sim}0.21\;kgBOD_5/kgMLSS/day$ of F/M ratio. At $36{\sim}48hr$ of HRT, removal rates of T-N and T-P were $89.7{\sim}90.7%\;and\;91.5{\sim}96.0%$ respectively. It means this treatment process also work to remove nutrients of high concentration. Upon investigation of advanced treatment's operation factors, optimum SRT was about 30days and average SNR that showed tendency to increase according to increase water temperature was calculated 0.014 gN/g MLVSS/d. SDNR was risen in conformity to increase F/M ratio of Non-aeration tank and investigated as $0.038{\sim}0.051\;gN/gMLVSS/d$.

염색폐수 처리성능에 대한 호기성 고정 및 유동층 생물막공법과 회전매체를 가진 완전혼합 활성슬러지 공법의 비교연구 (A comparative study of dyeing wastewater treatment capability for Aerobic Packed/Fluidized-Bed and Moving Media Complete Mixing Activated Sludge system)

  • 김홍태;김규창
    • 한국환경과학회지
    • /
    • 제8권4호
    • /
    • pp.525-532
    • /
    • 1999
  • This study was conducted to evaluate capability of dyeing wastewater treatment for 3 type reactors. These reactors were Packed Bed Reactor(PBR), Fluidized Bed reactor(FBR) and Moving Media Complete Mixing Activated Sludge reactor(MMCMAS). Experiments of PBR and FBR were performed by various packing ratios and organic loading rates, experiments of MMCMAS were performed by various organic loading rates. In order to obtain ${SBOD}_5$ removal efficiencies of more than 90%, the F/Mv ratios of PBR, FBR, MMCMAS were 0.11 kgBOD/kgMLVSS$\cdot$d, 0.12 kgBOD/kgMLVSS$\cdot$d, and 0.37 kgBOD/kgMLSS$\cdot$d, respectively. So MMCMAS system which has more active microorganisms showed better capability of organic removal and also stronger dynamic and shock loadings than those of PBR and FBR. In PBR and FBR, the media packing ratio of 20% showed better performance of organic matters removal effciencies than 10% and 30%, but sludge production rate at media packing ratio of 30% was relatively lower than that of 10% and 20%. When more than 90% organic matters removal efficiency was obtained, the ratios of attached biomass to total biomass at PBR, FBR, MMCMAS were 89~99%, 87~98%, and 54~80%, respectively. The ratio of attached biomass to total biomass was low in MMCMAS. This was formation of thin biofilm due to shear force between rotaing disc and water. The average sludge production rates(kgVSS/kgBODrem.) of PBR, FBR and MMCMAS were 0.20, 0.29 and 0.54, respectively.

  • PDF

연속회분반응기의 아질산 축적 특성과 질산화 및 탈질 미생물의 정량적 분포 연구 (Nitrite Accumulation Characteristics and Quantitative Analyses of Nitrifying and Denitrifying Bacteria in a Sequencing Batch Reactor)

  • 김동진;권현진;윤정이;차기철
    • 한국물환경학회지
    • /
    • 제24권3호
    • /
    • pp.383-390
    • /
    • 2008
  • Recently, the interests on economical nitrogen removal from wastewater are growing. As a method of the novel nitrogen removal technology, nitrogen removal via nitrite pathway by selective inhibition of free ammonia and free nitrous acid on nitrite oxidizing bacteria have been intensively studied. The inhibition effects of free ammonia and free nitrous acid are low when domestic wastewater is used, however, because of its relatively lower nitrogen concentration than the wastewater from industry and landfill, etc. In this study, a sequencing batch reactor (SBR) is proposed for nitrogen removal to investigate the effect of the low nitrogen concentration on nitrite accumulation. Nitrification efficiency reached almost 100% during the aerobic cycle and the maximum specific nitrification rate ($V_{max,nit}$) reached $17.8mg\;NH_4{^+}-N/g\;MLVSS{\bullet}h$. During the anoxic cycle, average denitrification efficiency reached 87% and the maximum specific denitrification rate ($V_{max,den}$) reached $9.8mg\;NO_3{^-}-N/g\;MLVSS{\bullet}h$. From the analysis the main reason of nitrite accumulation in the SBR was free nitrous acid rather than free ammonia. Nitrite accumulation increased with the decrease of organic content in the wastewater and the mechanism is not well understood yet. From the result of fluorescent in situ hybridization, the distribution of nitrite oxidizing bacteria was in equilibrium with ammonium oxidizing bacteria when nitrite accumulation did not occur.

호알칼리미생물을 이용한 슬러지감량형 하수처리공정 연구 (A Study on the Sludge-reduced Sewage Treatment Process Combined with Sludge Solubilization Technique Using Alkalophiles)

  • 신경숙;김윤석;한대훈;한운우;이영하;허형우
    • 상하수도학회지
    • /
    • 제21권6호
    • /
    • pp.737-744
    • /
    • 2007
  • Recently, one of the most interesting topic in the field of wastewater treatment is the disposal of excess sludge. The new concept of excess sludge reduction with recirculation of solubilized sludge via effective microorganisms for cell disruption within the wastewater treatment process has been developed in this study. The alkalophiles for degradation of sludge cell wall were isolated as Exiguobacterium sp., which could be more effectively solubilized sludge in the anaerobic condition. The SCOD of solubilized excess sludge by Exiguobacterium sp. was up to about 2,000mg/L and average TN and TP concentration of solubilized component were 117mg/L and 58mg/L, respectively and C/N ratio was more than 17. To investigate the effects of solubilized sludge by alkalophiles on excess sludge reduction and nutrient removal efficiency, the pilot plant of $DF^{(S)}-MBR$ process, combined with membrane bioreactor and sludge solubilization tank, was operated. In the control run(without sludge solubilization), the daily sludge production was about 4.54 kgMLVSS/day. However, in the $DF^{(S)}-MBR$(with sludge solubilization), the daily sludge production was decreased to 1.39kgMLVSS/day. The effluent quality satisfied the effluent regulation in both cases. Furthermore, the $DF^{(S)}-MBR$ showed relatively better TN removal efficiency in spite of high influent loading. So we concluded that the solubilized excess sludge by alkalophiles was effectively degraded in the MBR process as the carbon source and 70% of sludge reduction efficiency can be achieved.