• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.172-178
• /
• 2003

As a typoon gets into harbour, a moored ships shows erratic motions and even mooring line failures is occurred. Such troubles may be caused by harbour resonance phenomena, result in large motion amplitudes at law frequency, which is closed to the natural frequency of the moored ship. The nonlinear motions of a moored ship beside quay are simulated under external forces due to wave, current including mooring forces in time domain. The forces due to waves are obtained from source and dipole distribution method in the frequency domain. The current forces are calculated by using slow motion maneuvering equation in the horizontal plane. The wind forces are calculated from emperical formula of ABS and the mooring forces of ropes and fenders are modeled as linear spring.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.141-152
• /
• 2018

The heating process such as line heating, triangular heating and so on is widely used in plate forming of shell plates found in bow and stern area of outer shell in a ship. Local shrinkage during heating process is main physical phenomenon used in plate forming process. As it is well appreciated, the heated plate undergoes the change in material and mechanical properties around heated area due to the harsh thermal process. It is, therefore, important to investigate the changes of physical and mechanical properties due to heating process in order to use them plate the design stage of shell plates. This study is concerned with the development of formula of plastic hardening constitutive equation for steel plate on which line heating is applied. In this study the stress correction formula for the heated plate has been developed based on the numerical simulation of tension test with varying plate thickness and heating speed through the regression analysis of multiple variable case. It has been seen the developed formula shows very good agreement with results of numerical simulation. This paper ends with usefulness of the present formula in examining the structural characteristic of ship's hull.

• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.105-114
• /
• 2016

구조물에 충격하중이 작용하면, 그 구조물은 통상적으로 대변형을 동반하는 소성변형과 최종적으로 그에 따른 파단을 경험하게 된다. 본 연구에서는 사고적 극한 상태에 대한 합리적인 설계를 위해 열성형된 판과 냉간성형된 판의 재료상수를 고속인장시험에 대한 수치시현을 통해 정의하였다. 변형율이 중간 속도 이하인 경우에는 변형율 속도의 영향을 무시할 수 있다는 가정과 함께 Cower-Symond 모델과 John-Cook 모델에 포함되는 재료상수들의 유용성을 참고문헌들의 결과와 비교하여 입증하였다. 본 논문은 향후 연구 내용에 대한 언급을 포함하면서 마무리하였다.

• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.560-567
• /
• 2006

FPSO and shuttle tanker are connected to each other by a mooring hawser and a loading hose through which cargo oil is off-loaded. Even in mild sea-state. environmental loads can cause unstable large drift motions between two vessels in tandem off-loading operations, which may result in collision incidents. Accordingly. the analysis on the relative motion between two vessels due to the environmental loads should be investigated in initial design stage. In this study, the low speed maneuvering equation is employed to simulate nonlinear motions of FPSO and shuttle tanker. Low frequency wave drift forces including hydrodynamic interactions between two vessels are evaluated by near field approaches. Current loads are determined by mathematical model of MMG and wind loads are calculated by employing the wind spectrum according to the guidelines of API-RP2A. Mooring forces produced by turret mooring lines and a flexible hawser are modeled quasi-statically by catenary equations. The effect of environmental loads that affect nonlinear motion is investigated through variation in their magnitudes and the nonlinear motions between FPSO and shuttle tanker are simulated under wave, current and wind in time domain.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.522-531
• /
• 2006

This study has been conducted to evaluate the influence of ambient heavy metals to the air quality and to find their sources in Ulsan. Korea. The distribution characteristics of ambient heavy metals with wind direction were investigated by using pollution-rose diagram. Carcinogenic risk for five trace heavy metals (Pb. Cd, Cr, Mn, and Ni), which are classified to carcinogenic material by US EPA, are assessed according to the classification system of USEPA and WHO. According to pollution-rose calculation on pollutants sources, Pb and Cu in Deoksin, which is an adjacent to Onsan industrial complexes, were $0.1058\;and\;0.3242{\mu}g/m^3$. These concentration levels are the highest at all sampling sites. From this result we could confirm that it was affected by Onsan industrial complex that is located northeast of Deoksin.,And the maximum concentration of Cd, Cr, and Ni were $0.0306,\;0.0102,\;and\;0.0146\;{\mu}g/m^{3} in Yeocheon respectively. Because Yeocheon is in the Mipo industrial complexes, which have many combustors, incinerators, and manufacturing facilities compared to other regions. In carcinogenic risk assessment, Pb, Ni, and Mn concentration level at six sampling sites were lower than the risk level guideline values ($10^{-5}$) of WHO. However, $Cr^{6+}$ and Cd concentration in Yeocheon were 60% and 205% higher than the guideline values of WHO. Therefore it is very important that the emission from industrial complexes were carefully managed and controlled to improve air quality in residential area.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.498-504
• /
• 2016

In this study, to predict the effect of beach nourishment at Haeundae Beach, the waves and wave-induced currents were compared before and after beach nourishment using the XBEACH model. Representative wave conditions were determined for the data observed during 2014 (KHOA). Then, the Hs,max and Hs,1/10 values, and their prevalent directions, were used in the numerical modeling input data. A variable grid system was used for the $5km{\times}2.5km$ model areas, and irregular waves based on the JONSWAP spectrum were given as incident wave conditions. In the summer season, eastward wave-induced currents were developed along the beach by the incident wave direction. Before the beach nourishment, the maximum speed around the surf zone was 1.2-1.5 m/s in the central zone of the beach, whereas the maximum speed increased to 1.4-1.6 m/s at the same areas when the currents toward Mipo Harbor were blocked as an effect of the groins after the beach nourishment. In the winter season, westward wave-induced currents were developed along the beach by the incident wave direction. After the beach nourishment, the maximum current speed increased slightly around the surf zone in the central area of the beach, and the littoral current speed decreased at the submerged breakwaters located at Dongbaek Island. As a result, after the beach nourishment, the maximum wave-induced currents increased about 10% in the surf zone of the central area of the beach.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.245-250
• /
• 2002

This report describes the effects of following flaws due to ship's propeller on the fish farm structure when the ship's propeller is operated in full power. This study is applied an incompressible newtonian fluid theory, which is governed the Navier-Stokes equation. For the numerical solution, Neumann equation are applied as the boundary conditions. The result shows that the flow velocity near the fish farm is 1.0 m/sec. The actual measurement carries out by using propeller type velocimeter in order to measure the velocity of following flows and currents around the fish farm area. The result shows that the maximum velocity near the fish farm structure is 1.2 m/sec in depth of 1.5 m. This velocity is used for calculation of external force on the fish farm structure. The results of structural strength of the fish farm structures show that the actual maximum bending moment and bending stress are less than the damage strength of material. So the fish farm structure is not affected by the following flows and currents of ship's propeller.

• 한국항해항만학회지
• /
• 제37권6호
• /
• pp.663-671
• /
• 2013

해운대 해수욕장은 육지로부터 유입되는 모래 공급원의 감소와 고파랑 및 반사파 등의 영향으로 백사장의 폭이 매년 감소하는 것으로 나타났다. 표사이동에 따른 해빈변형 문제를 해결하기 위해서는 해빈류의 특성을 예측할 필요가 있다. 본 연구에서는 해운대 해수욕장에 대한 장기적이고 종합적인 관측자료를 바탕으로, 계절별 대표파랑과 이상파에 대한 해빈류 및 표사이동 수치실험을 실시하였다. 여름에는 평상파 및 S계열 파랑에 의해서 해빈류는 연안을 따라 동쪽으로 흘러 미포측에서 퇴적되는 양상을 보이고, 겨울에는 평상파 및 E 계열의 파랑에 의해 해빈류는 서향하여 동백섬 인근에서 퇴적양상을 보이고 있다. 50년빈도 고파랑 내습시 SSW 파랑은 해운대 중앙에서 이안류가 발생하고, ESE 파랑은 미포측에서 연안을 따라 서측으로 흐름을 발생시키는 것으로 나타났다.

• 한국환경보건학회지
• /
• 제44권6호
• /
• pp.515-523
• /
• 2018

Objectives: Based on the results of a chemical substance emissions survey, we investigated characteristics of chemical emissions in industrial complexes and used them as basic data for chemical management. Methods: The emissions and characteristics of chemicals by major industrial complexes from 2011 to 2015 were analyzed using the Pollutant Release and Transfer Register homepage. To understand the status of chemical accidents for major chemicals emitted from the industrial complexes, the Chemistry Safety Clearing-house system of the National Institute of Chemical Safety was used. Results: Emissions from the top five industrial complexes accounted for about 30% of total chemical emissions. The chemical emission was the highest in the order of Ulsan Mipo Industrial Complex and Okpo Industrial Complex. The main chemicals emitted were xylene, ethylbenzene, ethyl acetate, toluene, dichloromethane, and others. Carcinogen emissions differed by industrial complex, but ethylbenzene and dichloromethane were the major chemicals for this type of emissions. Conclusion: Recently, the use and emission of chemicals have been continuously increasing. A chemical management plan should be prepared considering the characteristics of industrial complexes and chemical substance emissions.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.213-221
• /
• 2023

The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m³. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.